Sorry, nothing was found. Please change your selection and try again.
Headshells
(1 - 31 of 31 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low
Vestax Headshell
CartridgeMounting bracket for pickup cartridges on turntablesWithout cartridge system
£19.99
Audio Technica AT-VM95ML/H
CartridgeSystem Type: VM stereo dual magnet systemStylus Profile: MicrolinearTracking Force: 2 gFrequency Range: 20 Hz - 25 kHzChannel Separation: 23 dBMaterial: AluminumDimensions: W21 mm x H21 mm x D62 mm
£171.90
Audio Technica AT-XP7
CartridgeSystem Type: Moving MagnetStylus Profile: EllipticalTracking Force: 4 gFrequency Range: 20 Hz - 20 kHzVertical scanning angle: 20°Load impedance: 47 kOhmWeight: 6.2 g
£149.99
source: OnBuy
Ortofon OM 5E
CartridgeSystem Type: EllipticalTracking Force: 1.75 gFrequency Range: 20 Hz - 25,000 HzChannel Separation: 22 dBWeight: 5 g
£59.99
Audio Technica AT-LH11H
Universal ½" aluminum headshell weighing 11 gCompatible with a wider range of cartridges and turntablesThrough holes without threads for cartridges with threaded mountingHard-anodized surface reduces vibrationsOFC lead wires for optimal sound qualityAdjustable cylinder for precise azimuth and overhang settingsIncludes mounting hardware (screws, washers, hex key)
£84.95
source: Amazon
Audio Technica AT-HS3
Universal 1/2-inch mount for 4-pole tonearmsLightweight aluminum die-cast housing reduces vibrationsAngled design for straight tonearmsFingerlift allows precise stylus positioningIncludes lead wires and mounting screwsSuitable for AT-LP3 and 1/2" cartridges
£28.00
Audio Technica AT-LH18/OCC
Headshell made of TechniHard materialWith AT6101 four-wire cableAdjustable overhang and azimuth7 pairs of mounting screws (3 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, and 14 mm)Allen key for adjusting overhang and tracking angleThread for cartridge mounting without nutsWeight of 18 g
£70.00
Shipping: £5.95
eBay - hard-to-find-hi-fi
Audio Technica AT-LH15/OCC
Headshell with 15 g weightMade from TechniHard materialAdjustable overhang and azimuth (tilt)Includes AT6101 four-conductor cable7 pairs of mounting screws in various sizesAllen key included for adjusting overhang and tilt angle
£69.95
Ortofon LH-2000
Ortofon LH-2000 HiFi Headshell made of aluminumUniversal cartridge mountingLength: 50.3 mm, width: 20 mmWeight: 15.5 gramsHeadshell with SME connectorSuitable for record players/turntables
£78.95
Shipping: Free
eBay - hifi-madness
Ortofon OM-System Pro
Cartridge system
- Needle tip spherical
- Frequency response 20 - 18,000 Hz
- Channel separation at 1 kHz 20 dB
- Tracking force 3 - 5 g
- Weight 5 g
£39.99
Audio Technica AT-XP3/H
Audiophile DJ cartridge AT-XP3 on AT-HS6BK headshellHiFi sound for stage and club DJsVM dual magnet systemCarbon fiber-reinforced ABS cantileverCompatible with replacement needles ATN-XP5 and ATN-XP7
£74.99
Shipping: £3.95
eBay - lords_electrical_outlet
Audio Technica AT-VM95E/H
Complete system with AT-VM95E cartridge and AT-HS6BK headshellDual Moving Magnet system, successor to the AT95EStylus with mounted elliptical diamond tipOutput voltage: 4.0 mV, tracking force: 1.8g to 2.2gRecommended load impedance: 47,000 Ω, load capacitance: 100-200 pFFrequency range: 20 22,000 HzPre-mounted on AT-HS6BK headshell with die-cast aluminum housing
£72.00
Audio Technica VM95E
CartridgeSystem Type: VM Stereo Dual MagnetStylus Profile: EllipticalTracking Force: 2.2 gFrequency Range: 20 Hz - 22 kHzDimensions: W18.9 mm x H17.2 mm x D28.3 mmWeight: 6.1 g
£31.99
Audio Technica AT-MG10
Weighs 10 gMagnesium headshell by Audio TechnicaWith SME connectorAdjustable, four-conductor cable, gold-plated contactsThreaded tonearm mounting without nutsSuitable for turntables
£49.95
Nagaoka MP-110H
Cartridge systemSystem Type: Moving IronStylus Profile: EllipticalTracking Force: 2 gFrequency Range: 20 Hz - 20 kHzChannel Separation: 23 dBWeight: 6.5 g
£178.50
Ortofon LH-6000
Rounded front for easy mountingHeadshell cable made of OFC copper, hard gold-platedColor-coded connectors for easy installationIncludes green clip for cartridge groundingCompatible with SME connector
£105.00
Audio Technica AT-VM95C/H
Moving Magnet Cartridge AT-VM95C/H incl. AT-HS6 HeadshellFrequency Range: 20 20,000 HzChannel Separation: 18 dB (1 kHz)Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)Vertical Tracking Force Range: 1.8 2.2 gStylus Shape: ConicalWeight: 15.5 gDimensions: 21.2 × 21.4 × 62.4 mm
£59.99
Audio Technica AT-LH13/OCC
Headshell made of TechniHard materialWeight: 13 gAdjustable overhang and azimuthIncludes AT6101 four-wire cableAllen key for adjusting overhang and azimuth angleSilver-colored design
£70.00
Shipping: £5.95
eBay - hard-to-find-hi-fi
Audio Technica AT-VM95SP/H
AT-VM95SP cartridge from the VM95 seriesMounted on AT-HS6BK headshellStylus compatibility: conical, elliptical, or microlinear stylusFrequency response: 20 20,000 HzOutput voltage: 2.7 mV at 1 kHz, 5 cm/sVertical tracking angle: 23 degreesWeight: 15.5 gDimensions: H21.2 W21.4 mm
£92.34
Audio Technica VM520EB/H
CartridgeSystem Type: VM TypeStylus Profile: Elliptical BondedTracking Force: 2.2 gFrequency Range: 20 Hz - 23 kHzChannel Separation: 27 dBDimensions: W17 mm x H17.3 mm x D28.2 mmWeight: 6.4 g
£139.90
Audio Technica AT-VM95SH/H
CartridgeSystem Type: VM Stereo Dual MagnetStylus Profile: ShibataTracking Force: 2.2 gFrequency Range: 20 Hz - 25 kHzChannel Separation: 23 dBDimensions: W21.4 mm x H21.2 mm x D62.4 mmWeight: 15.5 g
£197.95
Pioneer PC-HS01
System carrierSuitable for: Pioneer PLX-1000, PLX-500Fingerlift: 21 mmHead length: 52 mmWeight: 52 g
£40.85
Shipping: Free
Amazon
Numark GROOVE TOOL
Replaceable diamond stylus for traditional headshell mountRecommended tracking force: 2.5g-3.5gChannel separation of 26dB/1KHzOutput voltage of 2.4mVSuitable for headshell mountingExcellent value for moneyFrequency range from 20 to 18,000 HzSuitable for DJ turntables
£24.99
source: OnBuy
Nagaoka MP-300
SystemStylus Profile: naked ellipticalTracking Force: 1.7 gFrequency Range: 20 Hz - 25,000 HzWeight: 8 g
£599.00
Audio Technica AT-VM740xML
Dual Moving Magnet cartridge with microlinear stylus for precise audio reproductionPCUHD coils made of high-purity copper for three-dimensional sound outputCentral shielding plate reduces crosstalk for clean stereo separationAluminum die-cast housing to minimize unwanted resonancesCompatible with all half-inch cartridge headshellsDimensions: 29 mm height, 18 mm width, 17 mm depth
£169.00
Audio Technica VM520EB
CartridgeSystem Type: VMStylus Profile: EllipticalTracking Force: 2.2 gFrequency Range: 20 Hz - 23 kHzChannel Separation: 27 dBDimensions: W17 mm x H17.3 mm x D28.2 mmWeight: 6.4 g
£99.00
Reloop OM Black
CartridgeTracking Force: 4 gFrequency Range: 20 Hz - 18 kHzWeight: 5 g
£38.56
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0