Sorry, nothing was found. Please change your selection and try again.
Tool Bit Sets
(721 - 760 of 3,655 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low

Festool CENTRO bit set 1 (205087)
Bit set with 6 bits for Festool cordless drill driversBits are 50 mm long and stored in the Bit CheckBits can be directly inserted into the CENTROTEC tool chuckBit tip is chemically nickel-plated for increased durabilityChrome coating for enhanced corrosion protectionSuitable for furniture and kitchen assembly, installation of fittings, back panels, moldings, doors, and windowsAlso suitable for screwdriving tasks in wood, metal, and plastic
£47.36

Bosch HSS Drill Bit Set (2608577146)
HSS twist drill Impact Control for optimal drilling in metalPrecision milled and ground twist drill with oxide-coated fluteSuitable for alloyed and unalloyed steel, cast iron, non-ferrous metals, and plasticCompatible with hex shank systems (1/4 inch) and various drilling toolsSet includes 8 HSS drill bits with diameters from 2 to 10 mm and overall lengths from 60 to 133 mmManufactured according to DIN 338, with a tip angle of 135 degrees and diameter tolerance h8
£26.99

source: Amazon
Brüder Mannesmann Bit set 79-piece (M29894)
79-piece Screw and Bit SetRatchet screwdriver with 2-component handle and switchable right & left rotationBits made of chrome-vanadium steelIncludes various hex, security hex, security Torx, Torx, slotted, spanner, Tri-Wing, clutch, cross, Phillips, Torq, and spline bitsMaterial: chrome-vanadium steelCassette dimensions: Height 70.3 cm, Length 34.5 cm, Width 35.5 cm
£12.12

Einhell SDS drill bit set 12 pcs (49240281)
12-piece drill bit set for rotary hammersSDS-plus shank for all rotary hammers with SDS-plus chuckDrill bits in various sizes: 3x 60 mm (Ø 5, 6 mm), 7x 110 mm (Ø 6, 8, 10, 12 mm), 1x 160 mm (Ø 8 mm), 1x 210 mm (Ø 14 mm)Suitable for drilling into hard materials such as concrete or masonryCase dimensions: 29 x 17.8 x 6 cmWeight: 1.21 kg
£19.95

source: OnBuy
DeWalt DT90016
Milling Cutter SetNumber of pieces: 12Shaft diameter: 8 mmCutting edges: Diamond groundWeight: 760 g
£76.50

Bosch IXO 7 (06039E000B)
Cordless rechargeable screwdriver with 20% higher torqueMultifunctional use as drill, corkscrew, and cutting toolOptimized 2.0 Ah lithium-ion battery for up to 190 screws360° LED light ring to illuminate dark work areasLithium-ion technology without memory effect or self-dischargeIncludes 32-piece screwdriver bit set and Micro-USB cableBattery voltage 3.6 V, charging time 3 hours, max. torque 5.5 Nm
£59.44
Shipping: Free
eBay - buyaparcel-store

Bosch Hammer drill bit set (260925C090)
SDS-plus Hammer Drill Bit Set with 8 BitsActive Cutting Edge for Precise Hole Diameter in ConcreteVibration Reduced by AWB Brazing and Hardening TechnologySerrated Carbide Plate for Smooth Material PenetrationSuitable for Masonry, Concrete, and Reinforced ConcreteCompatible with All Rotary Hammers with SDS-plus Chuck
£20.88
Shipping: Free
Amazon

source: Amazon
Metabo HSS-Co drill bit set 19-piece (627157000)
19-piece set with cylindrical HSS-CO metal drill bitsCobalt-alloy version with bronze coatingSuitable for drilling in steel, stainless steel, cast steel, non-ferrous metals & plasticsAlso for special alloys up to 1100 N/mm² tensile strengthDrill diameters: 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mmCylindrical shank mountingIncludes metal case
£27.89

Makita DHR183Z
Rotary Hammer Type: Combi HammerCompact and low-vibration cordless rotary hammerSingle impact energy of 1.7 joules, drilling capacity up to 18 mm in concreteDustand splash-proof housing for outdoor useLow vibrations during rotary hammer drilling thanks to decoupled handleConnection option for DX16 dust extraction
£137.74

Bosch HSS Twist Drill Bit Set (2607010538)
Ground HSS twist drill bit for precise drilling in metalSelf-centering drill tip with split point and 135-degree tip angleNo center punching or pilot drilling required up to 10 mm diameterDrills 40% faster and requires 50% less feed force than conventional HSS drillsSuitable for alloyed and unalloyed steel, cast iron, non-ferrous metals, and hard plasticsCylindrical shank, manufactured to DIN 338, drill type N with 135-degree tip and diameter tolerance h8Diameter: 1.5-6.5 mm, working length: 18-63 mm, set dimensions: 124.0 x 106.5 x 23 mm
£24.95
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0










