Sorry, nothing was found. Please change your selection and try again.
Hss Tin Drill Bits
(1 - 12 of 12 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low
KS Tools 330.2349 HSS-TiN Step Drill Bit, ø 4-39 mm
Point grinding according to DIN 1412 CCross grinding as point grindingRight-cutting, spiral fluted118° tip angle, 90° step angleAbsolute smooth running, high cutting performanceTiN-coated surfaceHigh-performance steelWeight: 0.312 kg
£125.08
Shipping: Free
Amazon
KS Tools 330.2357 HSS-TiN Step Drill Bit, ø 6-25 mm
HSS-TiN Step Drill Bit with Ø 6 25 mm7 Steps AvailableTip According to DIN 1412 CRight-Cutting and Spiral-Grooved118° Tip Angle, 90° Step AngleHigh Cutting Performance with TiN-Coated SurfaceTaper Facilitates Withdrawal in Fully Drilled SheetsSuitable for Sheets and Non-Ferrous Metals
£52.55
Shipping: Free
Amazon
KS Tools 330.2356 HSS-TiN Step Drill Bit, ø 5-28 mm
Hand-operated HSS-TiN Step Drill BitDiameter from 5-28 mm, 7 stepsPoint ground according to DIN 1412 CRight-cutting, spiral-fluted118° point angle, 90° step angleHigh cutting performance, absolute smooth runningHigh-performance steel with TiN-coated surfaceTaper facilitates retraction when drilling through sheets, low cutting load allows higher feed rates in non-ferrous metals
£64.49
Shipping: Free
Amazon
KS Tools 330.2351 HSS-TiN Step Drill Bit, ø 6-20 mm
Point sharpening according to DIN 1412 CCross grinding as point sharpeningRight-cut spiral fluted118° tip angle, 90° step angleTiN-coated surfaceHigh-performance steelCone facilitates retraction in through-drilled sheetsHigher feed rates with non-ferrous metals due to low cutting load
£43.75
Shipping: Free
Amazon
KS Tools 330.2360 HSS-TiN Step Drill Bit, ø 6-36 mm
Hand-operated power sourceWeight: 0.255 kg11 levels availableDiameter: 6 36 mmOverall length: 82 mmMaterial: High-performance steelSurface: TiN-coated
£121.40
Shipping: Free
Amazon
KS Tools 330.2362 HSS-TiN Step Drill Bit, ø 4.8-10.7 mm
Pointing according to DIN 1412CCross grinding as pointingRight-cutting, spiral-fluted118° point angle, 90° step angleAbsolute smooth running, high cutting performanceTiN-coated surfaceHigh-performance steelCone facilitates retraction in through-drilled sheets
£26.42
Shipping: Free
Amazon
KS Tools 330.2352 HSS-TiN Step Drill Bit, ø 4-22 mm
Weight: 0.085 kgNumber of steps: 10Diameter: 4 22 mmTotal length: 76 mmShank diameter: 10 mmClamping length: 20 mmMaterial: High-performance steel
£50.19
Shipping: Free
Amazon
KS Tools 330.2358 HSS-TiN Step Drill Bit, ø 6-30.5 mm
HSS-TiN step drill bit with 9 stepsDiameter from 6 to 30.5 mmPoint geometry according to DIN 1412 CRight-cutting and spiral-fluted118° tip angle, 90° step angleHigh cutting performance with TiN-coated surfaceTaper facilitates retraction in fully drilled sheetsSuitable for sheet metal and non-ferrous metals
£87.35
Shipping: Free
Amazon
KS Tools 330.4125 HSS TiN Twist Drill, 12.5 mm, pack of 5
HSS TiN Spiral Drill Bits, Pack of 5, Diameter 12.5 mmDIN 338 Type NConical body grind as point grindCross grind as tip, right-cutting130° point angle, 20-30° helix angleHigh-performance steel with TiN-coated surfaceIdeal for use in steel, cast steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, malleable, malleable spheroidal, and die cast iron
£40.51
Shipping: Free
Amazon
KS Tools 330.4071 HSS TiN Twist Drill, 7.1 mm, pack of 10
HSS TiN twist drill bit, 10-pack, diameter 7.1 mmDIN 338 Type N, right-hand cuttingTapered body grind as point grind, cross grind as tip sharpening130° point angle, 20 30° helix angleHigh-performance steel with TiN-coated surfaceIdeal for use in steel, alloyed and unalloyed cast steel up to 900 N/mm² tensile strength, bronze, brass, short-chip aluminum alloys, graphite, nickel silver, sintered iron, grey, malleable, nodular, and die casting
£31.31
Shipping: Free
Amazon
KS Tools 330.4129 HSS TiN Twist Drill, 12.9 mm, pack of 5
Twist drill bits, pack of 5Diameter: 12.9 mmOverall length: 151 mm, flute length: 50 mm, partial length L2: 101 mmMaterial: high-performance steel, surface: TiN-coatedStandard: DIN 338 Type N, cutting direction: right-handApplication area: wood, plastic, metalFeatures: conical shank grinding as point sharpening, cross sharpening for tip clearance, 130° point angle
£42.61
Shipping: Free
Amazon
KS Tools 330.4092 HSS TiN Twist Drill, 9.2 mm, pack of 10
DIN 338 Type NRight-cuttingConical body grind as point grindCross grind as tipping130° point angleHigh-performance steelIdeal for use in steel, cast steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, tempered, sphe-ro, and die castingDiameter: 9.2 mm
£55.95
Shipping: Free
Amazon
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0