Sorry, nothing was found. Please change your selection and try again.
Bike Bottom Brackets
(121 - 160 of 761 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low

windmeile Bafang Bottom Bracket with Integrated PAS Sensor SR PA121.32.S for Bafang Hub Motors, Bicycle E-Bike Pedelec 75351_afn
Function: Bafang PAS sensor SR PA121.32.S is installed instead of the bottom bracket. There, the pedal activity is passed on to the controller at 32 pulses per revolution and thus defines the motor support. The advantage of this technology compared to speed sensors, which also count wheel turns when you push, is that the sensor only registers wheel turns when you actually pedal. Physical properties: the operating temperature of the sensor ranges from -20 to 45 °C. The sensor weighs 312g and is tested according to the highest industry standards, according to which no dust or moisture may penetrate, and have the IP X5 standard. It has an axle length of 119 mm and is designed for 68 mm bottom bracket width. Assembly: You will need to remove your bottom bracket to install. The sensor is screwed on and then with approx. 30 Nm. For this you can use the Bafang engine mounting tool for BBS01 / BBS02 / BBSHD. The cable is located in the centre of the sensor, so a hole is required in the middle of the bottom bracket housing. With a cable length of 0.5 metres, you have enough room to connect the sensor. Box contents: two rubber seals and matching crank screws for the right and left side are included. In addition, a seal for the cable routing on the bottom bracket housing is included to protect against water and dust. Accessories: For easy installation and best compatibility, we recommend matching accessories, such as Bafang controllers or motors at windmile, either in the Amazon store or on our website with detailed advice and instructions on all products, for your special e-bike or pedelec experience.
£58.74
Shipping: Free
Amazon Marketplace - windmeile

Oxford Unisex Hollowtech Threaded Bottom Bracket (68/73mm) | BB Cycle Bike Maintenance, Black, 68/73mm EU B0FDKX49Z4
Threaded: sealed, durable bearings for smoothness and bottom bracket body made from hard wearing alloy and nylon for longevity. Shell: 68/73mm Thread: BC 1.37"s x 24T Axle: 24mm Bearing: 37 x 25 x 6mm
£16.33
Shipping: £4.49
Amazon

MTB Press-Fit Bottom Bracket, 68/73/89.5/92mm for Mountain Bikes(MT500 BSA) MOBFCBAGO-MT500BSA
Precision-engineered for smooth crankset rotation and power transfer Multiple size options fit most mountain bike frame standards Sealed bearing design provides long-lasting performance Durable construction withstands rugged trail conditions Easy installation with proper press-fit tools
£50.56
Shipping: Free
Amazon Marketplace - yiyuannankeji

QSCTYG Bottom Brackets Adapter Bicycle Press Fit Bottom Brackets Axle Ceramic Bearing For Road Bike Parts 24mm Crankset Chainset 98 (Color : BB30 24 RD CR TOOL) LYGQ-14-3426
Qualified alloy material, solid and durable and is crafted with fine machining, lightweight and durable. This structure does not compress the bearing, so the bearing can run very smoothly. And eliminates creaking of traditional press fit bottom brackets. It is a integrated sleeve and inside bearing to make sure the bearing rotate stably. Waterproof, dust bearing and bearing shield design, which can help to prevent the erosion of sediment water. Smooth rotation, easy installation and operation, which makes pedaling more labor-saving-Provides more force transmission from the pedal. If you have any questions, please feel free to contact us, we will help you at any time and contact you within 24 hours.
£56.83
Shipping: Free
Amazon Marketplace - Shanshibaihuo

London Craftwork Titanium Bottom Bracket For BROMPTON Lightweight 146gramm BLACK
Made of anti-rust and lightweight Ti6Al4V titanium axle with improved 119mm and lightweight CNC alloy cups. Weight: approx 146 (150gr less than the original bracket). Fits after 2013 Brompton model spider crank.
£59.99
Shipping: Free
Amazon Marketplace - London Craftwork

Bicycle Bottom Bracket Press Tool Kit for Bicycle Bottom Bracket Installation and Disassembly with Ergonomic Handle Designs Starter Edition
1. Made from aluminum alloy and steel, this tool set is durable, withstands intensities, and significantly extends its lifespan. 2. With its...
£88.85
Shipping: Free
OnBuy
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0































