Sorry, nothing was found. Please change your selection and try again.
Vent Kits
(1 - 40 of 1,859 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low

NEFF Z861KR1 Recirc Kit for Venting Hob 134153
For partially ducted recirculated installations in worktops of a minimum depth of 60cm, the kit contains 1 x Small radius bend (Z861SB4) 1 x Large radius bend (Z861SB2) 3 x connectors (Z861SS1) 1 x 50cm straight channel (Z861SM1) 1 x diffusor (Z821PD1). The elements enable installations in worktop heights up to 960mm Relies on a combination of ducting and furniture to disperse the air. Uses ducting to guide air partially around the furniture then uses the remaining void. This requires greater depth work surface or reduced depth drawers Suitable both for island installations or installations against a single wall without installation Fan runs for 30 minutes after use at speed 1 to draw air through filters, to dry them and move any excessive moisture and odor
£167.76
Shipping: Free
Travis Perkins

NEFF Z861KE1 Recirc Kit for Venting Hob 134147
For fully ducted out extraction for worksop depths of 60cm or larger, the kit contains 1 x Small radius bend (Z861SB4) 1 x connector (Z861SS1) 1 x 50cm straight channel (Z861SM1) 1 x set of 4 acoustic filters (Z811DU0) Allows the removal of heat and moisture created by cooking, as well as grease and odour Further ducting elements must be ordered additionally, according to the customised planning for your specific installation situation Can be installed with a ducting run of 8 metres with 3 x 90 degree turns and it still performs efficiently Recirculation 615m3h, ducted out 622m3h
£149.00
Shipping: Free
Travis Perkins

Unbranded Dryer Vent Kit, Indoor Dryer Vent Kit, Wall Mounted Exhaust Plate, Replacement Plate For Ventilation Fans, Universal Fit
Allinone vent kit designed for quick, secure installation. It includes a vent connector, adjustable telescopic hose, silicone gaskets for tight seals,
£65.25
Shipping: Free
OnBuy

NEFF Z861KR0 Recirc Kit for Venting Hob 134148
For partially ducted recirculated installations in worktops of a minimum depth of 70cm, the kit contains 2 x Large radius bends (Z861SB2), 3 x connectors (Z861SS1), 1 x 50cm straight channel (Z861SM1) 1 x diffusor (Z821PD1). The elements enable installations in worktop heights up to 960mm Relies on a combination of ducting and furniture to disperse the air. Uses ducting to guide air partially around the furniture then uses the remaining void. This requires greater depth work surface or reduced depth drawers Suitable both for island installations or installations against a single wall without installation Fan runs for 30 minutes after use at speed 1 to draw air through filters, to dry them and move any excessive moisture and odor
£149.00
Shipping: Free
Travis Perkins

K and N 85-1450 Car Air Filter Vent Kit B00062YHX8
High air flow with excellent filtration Designed to increase horsepower and acceleration Fits into existing factory air box, no cutting or fitting is required Filters are washable and reusable and are backed by K&N's million-mile limited warranty
£29.77
Shipping: Free
Amazon
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0


































