Two Channel Amplifiers

Musway TWO 100 2 channel amplifier

Musway TWO 100 2 channel amplifier, Vehicle Parts & Accessories > In-Car Technology, GPS & Security > In-Car Entertainment > Amplifiers

£239.99

Shipping: Free

Go to Shop

eBay - allwoodsaudio

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-50K-DSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-500K-DSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-250K-ROUNDSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-10K-DSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-100K-ROUNDSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-500K-ROUNDSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-100K-DSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-50K-ROUNDSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-10K-ROUNDSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

Dual-channel Potentiometer Potentiometer two-channel volume amplifier control XCBECOAEB-250K-DSHAFT

[Channel Balance]: Minimal tracking error between left and right channels, with a stable stereo centre across the full rotation range. No phase shift in the mid-to-high frequencies, and consistent instrument localisation when the volume is adjusted. [Control Feel]: Mechanical stepped settings provide clear tactile feedback at each notch. The knob offers moderate rotational damping with no play, allowing for repeatable adjustment to specific levels. Metal spindles and bushings minimise wear during long-term use. [Noise-Free Switching]: A sealed switch housing, combined with silver-plated contacts and a ‘break-before-make’ switching sequence, prevents friction noise caused by dust and eliminates transient clicks during adjustment, thereby avoiding voltage spikes that could damage the power amplifier. [Resistor Stability]: The attenuation network utilises metal-film resistors with tight tolerances. Attenuation is uniform across all settings, with low temperature drift and minimal additional noise, ensuring the system’s original signal-to-noise ratio remains unaffected. [Installation Notes]: The solder-tab terminals are suitable for standard DIY wiring. This product is a passive attenuator and does not provide any gain. Please ensure that the preamplifier’s output impedance matches the load impedance before connection. The power must be switched off during installation. Do not apply excessive force when tightening the fixing nuts.

£58.51

Shipping: Free

Go to Shop

Amazon Marketplace - GoodF International Commercial Ltd.

PA400 Gallium Nitride Power Amplifier Two-channel Digital Pure Through AMP OZOCRSFAS

High-Fidelity Audio Amplification: Professional-grade power amplifiers deliver low-distortion, pristine audio reproduction for critical listening applications Advanced Amplification Technology: Utilizes efficient Class D or precision Class AB circuitry to balance power output with thermal management Multi-Channel Integration: Provides multiple independent channels with stable power output to meet complex audio configurations Professional Rack-Mount Design: Features efficient heat dissipation to ensure stable in installed environments

£1,075.73

Shipping: Free

Go to Shop

Amazon Marketplace - Global Imported Electronic Supplier

Pa200 Gallium Nitride Power Amplifier Two-channel Digital Power Amplifier Pure Power Amplifier Through AMP OZOCRSOZA

High-Fidelity Audio Amplification: Professional-grade power amplifiers deliver low-distortion, pristine audio reproduction for critical listening applications Advanced Amplification Technology: Utilizes efficient Class D or precision Class AB circuitry to balance power output with thermal management Multi-Channel Integration: Provides multiple independent channels with stable power output to meet complex audio configurations Professional Rack-Mount Design: Features efficient heat dissipation to ensure stable in installed environments

£790.33

Shipping: Free

Go to Shop

Amazon Marketplace - Global Imported Electronic Supplier

AD-700 350W Hifi Stereo Audio Amplifier Two-channel High Power Amplifier Board

1.350W more per channel. 2.Powerful output power. 3.new and high quality 4.High-power sound quality is good.

£176.57

Shipping: Free

Go to Shop

OnBuy

AD-700 350W Hifi Stereo Audio Amplifier Two-channel High Power Amplifier Board

1.Powerful output power. 2.new and high quality 3.High-power sound quality is good. 4.350W more per channel.

£176.57

Shipping: Free

Go to Shop

OnBuy

KeShen A907 Professional Two-channel Microphone Amplifier Dual Microphone Reverb

About the product 1. The amplifier is made of metal material, hard and durable 2. Volume gain knob is well-designed and user-friendly 3.

£93.57

Shipping: Free

Go to Shop

OnBuy

AD-700 350W HiFi Stereo Audio Amplifier Two-Channel High Power Amplifier Board for Home Theater and Music Systems

- Premium Quality: Experience exceptional sound with our high-quality audio output designed for discerning listeners. - Enhanced Sound Performance:...

£106.05

Shipping: Free

Go to Shop

OnBuy

1PCS D130A TPA3250 Bluetooth-Compatible 5.1 Two-Channel Digital Power Amplifier 2*130W

Features : 1.D130A output can only be connected to passive speakers,not active speakers or fixed voltage speakers 2.D130A use DC24V-32V power...

£83.20

Shipping: Free

Go to Shop

OnBuy

Musway TWO100 2-CHANNEL SCS CLASS D AMPLIFIER 400w rms

Musway TWO100 2-CHANNEL SCS CLASS D AMPLIFIER 400w rms, Vehicle Parts & Accessories > In-Car Technology, GPS & Security > In-Car Entertainment > Amplifiers

£239.99

Shipping: Free

Go to Shop

eBay - allwoodsaudio

Crown Two-channel 125W/ch. Power Sharing Amplifier with DSP and Dante 419669

Ctd-2125 Amplifier Crown Comtech D Series Amplifiers Are Designed For Versatility Flexibility And Ease Of Installation. With Both Dante Inputs And Outputs Built-In Dsp Power Sharing Lo-Z/Hi-Z Switching And A Simple To Use Web Configuration Interface Comtech D Amplifiers Are Ideal For Meeting The Changing Demands Of Diverse Installed Audio Applications. The Ctd-2125 Delivers 125 Watts Per Channel Of Legendary Crown Amplification When All Channels Are Driven Equally. Asymmetrical Power Sharing Enables The Two Channels To Share The Full 250W In Any Ratio Offering Unparalleled Flexibility. Built-In Dsp Allows Outputs To Be Tuned Specifically For Every Application And Provides The Ability To Create Custom Speaker Tunings. Factory Jbl Speakertunings For Select Jbl Models Including Control 400 Series Ceiling Speakers Are Included To Simplify The Optimization Of An All-Harman Solution. The Amplifier Can Be Configured Through The Intuitive Web Interface With Any Computer Or Tablet And Without The Need To Install Proprietary Software. It Uses Harman'S Hcontrol Protocol To Communicate Natively With Bss Omni Processors Or Amx Muse Automation Controllers And Includes An Easy-To-Use Api For Integration With 3Rd-Party Control Systems. This Compact 1Ru ? Rack Width Device Can Be Installed In A Rack Under A Table Or On A Wall Using The Included Mounting Hardware. Features: • Dante Inputs And Outputs • Dsp For Room Tuning And Speaker Tuning • Power Sharing • Webui Configuration • Lo-Z/Hi-Z Switchable Outputs • Compact Design • Factory Jbl Speakertunings • Pilot Tone & Load Monitoring • Source Priority Switching • Gpio Interface • Hcontrol Features Warranty 3 Years

£963.36

Shipping: Free

Go to Shop

Quzo UK

5pcs 2x100W XH-M190 TPA3116 D2 Dual Channel Digital Audio Amplifier Board for TPA3116D2 Two Channel Module 100W+100W 12-24V

Specification: Chip: TPA3116 Power supply: 12V-24V Channel Type: Dual Channel Output power: 2*100W Input impedance: 51K*2 Output Match: 4-8 Ohm...

£63.60

Shipping: £3.85

Go to Shop

OnBuy

Crown Two-channel 350W @ 4Ohms Power Amplifier 403491

Crown extended warranty to 6 years The next generation of XLS got a makeover with a sleek new look a LCD display that is three times larger and more DSP with higher capabilities. Like its predecessor the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful pure sound experience for any venue. - Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg) - Higher DSP capabilities: More control; has band pass filter per channel - Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues - Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power - Set sleep mode after specified time without having to press a button - Security setting disables menu buttons; menu locked/unlocked by entering combination - System reset allows factory settings to be restored - Remote power trigger - Peakx™ Limiters provide maximum output while protecting your speakers - XLR 1/4 RCA inputs provide flexibility - Integrated PureBand™ Crossover System for better performance and control - Efficient forced-air fans prevent excessive thermal buildup Features Type Power Amplifier Power Output 350 Weight 3.9 Kg Dimensions W x D x H 483 x 89 x 196 mm Warranty 6 years warranty

£449.15

Shipping: Free

Go to Shop

Quzo UK

Car Power Amplifier 2 Channel Car Audio High Power Amplifier 5200W Two-Way Aluminum Car Audio Amplifier

Voltage: 12V Two-channel power: 2 x 100W 2 ohms, 2 x 200W 4 ohms Maximum power: 5200W Function: Bridgeable Features: frequency control, phase...

£54.47

Shipping: £3.09

Go to Shop

OnBuy

PA-X Power Amplifier HIFI Two-Channel Digital Audio Support Mono Mode 8Ω OSOZBBSAO

High-Fidelity Audio Amplification: Professional-grade power amplifiers deliver low-distortion, pristine audio reproduction for critical listening applications Advanced Amplification Technology: Utilizes efficient Class D or precision Class AB circuitry to balance power output with thermal management Multi-Channel Integration: Provides multiple independent channels with stable power output to meet complex audio configurations Professional Rack-Mount Design: Features efficient heat dissipation to ensure stable in installed environments

£1,158.88

Shipping: Free

Go to Shop

Amazon Marketplace - Global Imported Electronic Supplier

High-Performance Dual Channel Mini Amplifier - Low Distortion Sound Quality

High-Performance Dual Channel Mini Amplifier - Low Distortion Sound Quality, Sound & Vision > Home Audio & HiFi Separates > Amplifiers & Pre-Amps

£20.78

Shipping: Free

Base price: £38.99 / Unit

Go to Shop

eBay - platinum.marketplace

1/2/4PCS 6922 tube amplifier(1 pair) ZIZBAIEZI-1PAIR

Preamplifiers

£1,270.43

Shipping: Free

Go to Shop

Amazon Marketplace - Liuyang Buyu Jie Department Store Co., Ltd.

1/2/4/PCS E-300B Tube Amplifier(2pcs Matched Pair) ZIZBCDDIA-2PCSMATCHEDPAIR

Preamplifiers

£3,588.96

Shipping: Free

Go to Shop

Amazon Marketplace - Liuyang Buyu Jie Department Store Co., Ltd.

1/2/4PCS CV181-H Tube Amplifier Four Channel(2pcs Matched Pair) ZIZZGEZCD-2PCSMATCHEDPAIR

Preamplifiers

£943.19

Shipping: Free

Go to Shop

Amazon Marketplace - Liuyang Buyu Jie Department Store Co., Ltd.

1/2/4PCS matching tube amplifier(2PCS) ZIZBCDDBI-2PCS

Preamplifiers

£371.58

Shipping: Free

Go to Shop

Amazon Marketplace - Liuyang Buyu Jie Department Store Co., Ltd.

Dual-Band 2.4GHz/5.8GHz Bidirectional Amplifier - 1 Input, 2 Output, 4W, 36dBm

- Operates on dual bands: 2.4GHz and 5.8GHz, ensuring versatile and reliable wireless signal enhancement. - Features a single input and two outputs...

£312.81

Shipping: Free

Go to Shop

OnBuy

2 Input 2 Output Power Amplifier Speaker Switcher

2 Input 2 Output Power Amplifier Speaker SwitcherProduct presentation:1. Support power is 200 watts: A and B power amplifiers with speaker selector...

£118.15

Shipping: Free

Go to Shop

OnBuy

*Dual Channel Amplifier Board With Bass And Treble Control For Home Audio System

*Dual Channel Amplifier Board With Bass And Treble Control For Home Audio System, Sound & Vision > Home Audio & HiFi Separates > Amplifiers & Pre-Amps

£15.99

Shipping: Free

Go to Shop

eBay - caosis

2.1 Channel Hi-Fi Stereo Amplifier 20W2 + 40W

Parameter Type: Power Amplifier Amplifier model: ST-838 Amplifier channel: 2.1 Input voltage: 12V Output power: 20W * 2+40W Output impedance: 4-8...

£54.40

Shipping: Free

Go to Shop

OnBuy

AB400 Dual Channel Amplifier Board 400W X2, TA1943/TTC5200 2.0

AB400 dual channel professional stage amplifier board circuit design is and stable, the use of double differential input and increase the input...