Sorry, nothing was found. Please change your selection and try again.
Knife Blades
(801 - 840 of 2,617 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low

,Compatible for MRD,Pro Professional Hair Clipper Horn Cutter Trimmer Faded Blade Pick Knife Fixed Knife Moving Accessories(Horns Blade C) VDDHTGHDH-HORNSBLADEC
The tooth edge of the aging cutter head is worn and passivated, and it is easy to hook thick and hard hair when cutting hair, which will cause tingling when pulling the scalp. The cutting edge of the replaced hair clipper cutter head is flat and sharp, which can be broken when it is cut, and thick long hair and thick beard can be trimmed smoothly. The cutting resistance of blunt knife is large, and the motor continues to heat and consume electricity under high load, which is easy to lose the movement. The cutting resistance is greatly reduced by replacing the hair clipper cutter head, the motor runs more easily, the hair clipper fault is reduced, and the service life of the whole machine is prolonged. The friction coefficient of blunt tool tip is high, and the scalp can be heated up quickly after continuous use. Replacing the hair clipper cutter head has less friction and slow heat conduction, and it is not hot at low temperature even if it is used continuously all day. The buckle of the aging cutter head is deformed, and the hair style is damaged when it is trimmed. The size of the replacement hair clipper cutter head accurately matches the machine body, and the buckle is firmly attached, and there is no need for tools for disassembly and assembly, and the whole trimming process does not shift or fall off. It is expensive to replace the whole machine only when the cutter head is worn, and it is cheaper to replace the hair clipper cutter head alone. Restore all the performance of hair clipper at low cost, and greatly save long-term care expenses.
£66.09
Shipping: Free
Amazon Marketplace - bangbang S

MARTOR 100 x Graphic Blade, Replacement Blades Graphic Knife, Craft Knife, Scalpel, deburrer, 9 mm, Sharp, Single use, no. 640 B0968NYYWW
Sturdy blade: The original MARTOR graphic blades can be used once and are extremely sharp. They are durable and perfect for filigree and particularly precise cutting work. High-quality sharpening: The practical blades with double bevel have a cutting edge that is sharpened on both sides. It is particularly fine, making precise cutting work possible without any problems. Versatile: The blades are ideal as replacement blades for suitable MARTOR cutting tools, such as the GRAFIX 501 and TRIMMEX CUTTOGRAF. Family-run for over 80 years: The traditional company MARTOR produces innovative and high-quality cutting solutions for professional and safe use. Scope of delivery & Product features: 100 x MARTOR graphic blade no. 640 in magazine, Material: steel, Length: 43 mm, Width: 9 mm, Material thickness: 0.63 mm, Grinding: 2-sided, Blade facets: 2-fold, 1-hole blades, Item no.: 640, Weight: 0.330693393 pounds, Manufacturer: MARTOR KG
£61.84
Shipping: Free
Amazon

MARTOR 100 x Graphic Blade, Replacement Blades Graphic Knife, Craft Knife, Scalpel, 5.7 mm, Sharp, TiN-Coated, No. 834 B011SAZHOO
Sturdy blade: The original MARTOR graphic blades are extremely sharp. They are durable and perfect for filigree and particularly precise cutting work. TiN-coated: The titanium-nitride coating extends blade life, reduces wear, maintains sharpness, protects against corrosion and ensures consistently high cutting comfort - even with intensive use. Suitable replacement: The blades are ideal as replacement blades for the MARTOR GRAFIX 501 graphic knife, TRIMMEX SIMPLASTO and TRIMMEX CUTTOGRAF. Family-run for over 80 years: The traditional company MARTOR produces innovative and high-quality cutting solutions for professional and safe use. Scope of delivery & Product features: 100 x MARTOR graphic blade no. 834 in magazine, material: steel, length: 36.5 mm, width: 5.7 mm, material thickness: 0.5 mm, grind: 2-sided, blade facets: 2-fold, 2-hole blades, item no.: 834, Weight: 0.00110231131 pounds, Manufacturer: MARTOR KG
£47.99
Shipping: Free
Amazon

,Compatible for MRD,Pro Professional Hair Clipper Horn Cutter Trimmer Faded Blade Pick Knife Fixed Knife Moving Accessories(Horns Blade T) VDDHTGHDH-HORNSBLADET
The tooth edge of the aging cutter head is worn and passivated, and it is easy to hook thick and hard hair when cutting hair, which will cause tingling when pulling the scalp. The cutting edge of the replaced hair clipper cutter head is flat and sharp, which can be broken when it is cut, and thick long hair and thick beard can be trimmed smoothly. The cutting resistance of blunt knife is large, and the motor continues to heat and consume electricity under high load, which is easy to lose the movement. The cutting resistance is greatly reduced by replacing the hair clipper cutter head, the motor runs more easily, the hair clipper fault is reduced, and the service life of the whole machine is prolonged. The friction coefficient of blunt tool tip is high, and the scalp can be heated up quickly after continuous use. Replacing the hair clipper cutter head has less friction and slow heat conduction, and it is not hot at low temperature even if it is used continuously all day. The buckle of the aging cutter head is deformed, and the hair style is damaged when it is trimmed. The size of the replacement hair clipper cutter head accurately matches the machine body, and the buckle is firmly attached, and there is no need for tools for disassembly and assembly, and the whole trimming process does not shift or fall off. It is expensive to replace the whole machine only when the cutter head is worn, and it is cheaper to replace the hair clipper cutter head alone. Restore all the performance of hair clipper at low cost, and greatly save long-term care expenses.
£65.65
Shipping: Free
Amazon Marketplace - bangbang S

,Compatible for MRD,Pro Professional Hair Clipper Horn Cutter Trimmer Faded Blade Pick Knife Fixed Knife Moving Accessories Replace(Blade C) ZAAZAUSZH-BLADEC
The cutting edge of the aging cutter head is worn and passivated, and it is easy to scratch the scalp and cause pain when trimming thick and hard hair. The blade surface of the replacement hair clipper cutter head is flat and sharp, and all kinds of hair can be cut off in one cut, so that the haircut process is smooth and comfortable without pinching hair. The tooth pitch of the worn cutter head is misaligned, and it is easy to have mottled depth and missing cutting areas in haircut. Replace the hair clipper cutter, the cutter's pitch is stable, the lines are clean and neat, and you can also cut the salon-level gradient and inch-level exquisite hairstyle at home. Passivated cutter head is difficult to handle curly hair and thick beard, and needs to be trimmed back and forth repeatedly. Replacing hair clipper cutter head has strong cutting force, which can not only trim long hair and short hair, but also care for sideburns and beards, thus meeting various modeling requirements. It is expensive to replace the whole hair clipper only when the cutter head is worn, and it is even cheaper to replace the hair clipper cutter head alone. Recover the full performance of the equipment with a small cost, and save a lot of home appliance purchase expenses after long-term use. The buckle of aging cutter head is deformed and loose, and it is easy to deviate and shake when trimming, which will damage the hairstyle. The size of the replacement hair clipper cutter head accurately matches the machine body, the buckle is firm and not easy to fall off, and there is no need for tools for disassembly and assembly, so the operation is simple and worry-free.
£58.86
Shipping: Free
Amazon Marketplace - H xinsenH

,Compatible for MRD,Pro Professional Hair Clipper Horn Cutter Trimmer Faded Blade Pick Knife Fixed Knife Moving Accessories Replace(Blade Standard G) ZAAZAUSZH-BLADESTANDARDG
The cutting edge of the aging cutter head is worn and passivated, and it is easy to scratch the scalp and cause pain when trimming thick and hard hair. The blade surface of the replacement hair clipper cutter head is flat and sharp, and all kinds of hair can be cut off in one cut, so that the haircut process is smooth and comfortable without pinching hair. The tooth pitch of the worn cutter head is misaligned, and it is easy to have mottled depth and missing cutting areas in haircut. Replace the hair clipper cutter, the cutter's pitch is stable, the lines are clean and neat, and you can also cut the salon-level gradient and inch-level exquisite hairstyle at home. Passivated cutter head is difficult to handle curly hair and thick beard, and needs to be trimmed back and forth repeatedly. Replacing hair clipper cutter head has strong cutting force, which can not only trim long hair and short hair, but also care for sideburns and beards, thus meeting various modeling requirements. It is expensive to replace the whole hair clipper only when the cutter head is worn, and it is even cheaper to replace the hair clipper cutter head alone. Recover the full performance of the equipment with a small cost, and save a lot of home appliance purchase expenses after long-term use. The buckle of aging cutter head is deformed and loose, and it is easy to deviate and shake when trimming, which will damage the hairstyle. The size of the replacement hair clipper cutter head accurately matches the machine body, the buckle is firm and not easy to fall off, and there is no need for tools for disassembly and assembly, so the operation is simple and worry-free.
£58.02
Shipping: Free
Amazon Marketplace - H xinsenH

,Compatible for MRD,Pro Professional Hair Clipper Horn Cutter Trimmer Faded Blade Pick Knife Fixed Knife Moving Accessories Replace(Blade Fade B) ZAAZAUSZH-BLADEFADEB
The cutting edge of the aging cutter head is worn and passivated, and it is easy to scratch the scalp and cause pain when trimming thick and hard hair. The blade surface of the replacement hair clipper cutter head is flat and sharp, and all kinds of hair can be cut off in one cut, so that the haircut process is smooth and comfortable without pinching hair. The tooth pitch of the worn cutter head is misaligned, and it is easy to have mottled depth and missing cutting areas in haircut. Replace the hair clipper cutter, the cutter's pitch is stable, the lines are clean and neat, and you can also cut the salon-level gradient and inch-level exquisite hairstyle at home. Passivated cutter head is difficult to handle curly hair and thick beard, and needs to be trimmed back and forth repeatedly. Replacing hair clipper cutter head has strong cutting force, which can not only trim long hair and short hair, but also care for sideburns and beards, thus meeting various modeling requirements. It is expensive to replace the whole hair clipper only when the cutter head is worn, and it is even cheaper to replace the hair clipper cutter head alone. Recover the full performance of the equipment with a small cost, and save a lot of home appliance purchase expenses after long-term use. The buckle of aging cutter head is deformed and loose, and it is easy to deviate and shake when trimming, which will damage the hairstyle. The size of the replacement hair clipper cutter head accurately matches the machine body, the buckle is firm and not easy to fall off, and there is no need for tools for disassembly and assembly, so the operation is simple and worry-free.
£57.60
Shipping: Free
Amazon Marketplace - H xinsenH

Ultra Durable Mushroom Knife with Brush, Foraging Hunting Knife with Reinforced Wood Handle and Stainless Steel Blade, Folding Pocket Knife with Sharp
Blending rugged reliability with thoughtful design, this ultra-durable mushroom knife is built to last through countless foraging seasons. The...
£310.00
Shipping: Free
OnBuy

,Compatible for MRD,Pro Professional Hair Clipper Horn Cutter Trimmer Faded Blade Pick Knife Fixed Knife Moving Accessories Replace(Blade Standard B) ZAAZAUSZH-BLADESTANDARDB
The cutting edge of the aging cutter head is worn and passivated, and it is easy to scratch the scalp and cause pain when trimming thick and hard hair. The blade surface of the replacement hair clipper cutter head is flat and sharp, and all kinds of hair can be cut off in one cut, so that the haircut process is smooth and comfortable without pinching hair. The tooth pitch of the worn cutter head is misaligned, and it is easy to have mottled depth and missing cutting areas in haircut. Replace the hair clipper cutter, the cutter's pitch is stable, the lines are clean and neat, and you can also cut the salon-level gradient and inch-level exquisite hairstyle at home. Passivated cutter head is difficult to handle curly hair and thick beard, and needs to be trimmed back and forth repeatedly. Replacing hair clipper cutter head has strong cutting force, which can not only trim long hair and short hair, but also care for sideburns and beards, thus meeting various modeling requirements. It is expensive to replace the whole hair clipper only when the cutter head is worn, and it is even cheaper to replace the hair clipper cutter head alone. Recover the full performance of the equipment with a small cost, and save a lot of home appliance purchase expenses after long-term use. The buckle of aging cutter head is deformed and loose, and it is easy to deviate and shake when trimming, which will damage the hairstyle. The size of the replacement hair clipper cutter head accurately matches the machine body, the buckle is firm and not easy to fall off, and there is no need for tools for disassembly and assembly, so the operation is simple and worry-free.
£58.19
Shipping: Free
Amazon Marketplace - H xinsenH

,Compatible for MRD,Pro Professional Hair Clipper Horn Cutter Trimmer Faded Blade Pick Knife Fixed Knife Moving Accessories Replace(Horns Blade T) ZAAZAUSZH-HORNSBLADET
The cutting edge of the aging cutter head is worn and passivated, and it is easy to scratch the scalp and cause pain when trimming thick and hard hair. The blade surface of the replacement hair clipper cutter head is flat and sharp, and all kinds of hair can be cut off in one cut, so that the haircut process is smooth and comfortable without pinching hair. The tooth pitch of the worn cutter head is misaligned, and it is easy to have mottled depth and missing cutting areas in haircut. Replace the hair clipper cutter, the cutter's pitch is stable, the lines are clean and neat, and you can also cut the salon-level gradient and inch-level exquisite hairstyle at home. Passivated cutter head is difficult to handle curly hair and thick beard, and needs to be trimmed back and forth repeatedly. Replacing hair clipper cutter head has strong cutting force, which can not only trim long hair and short hair, but also care for sideburns and beards, thus meeting various modeling requirements. It is expensive to replace the whole hair clipper only when the cutter head is worn, and it is even cheaper to replace the hair clipper cutter head alone. Recover the full performance of the equipment with a small cost, and save a lot of home appliance purchase expenses after long-term use. The buckle of aging cutter head is deformed and loose, and it is easy to deviate and shake when trimming, which will damage the hairstyle. The size of the replacement hair clipper cutter head accurately matches the machine body, the buckle is firm and not easy to fall off, and there is no need for tools for disassembly and assembly, so the operation is simple and worry-free.
£66.24
Shipping: Free
Amazon Marketplace - H xinsenH

,Compatible for MRD,Pro Professional Hair Clipper Horn Cutter Trimmer Faded Blade Pick Knife Fixed Knife Moving Accessories Replace(Horns Blade C) ZAAZAUSZH-HORNSBLADEC
The cutting edge of the aging cutter head is worn and passivated, and it is easy to scratch the scalp and cause pain when trimming thick and hard hair. The blade surface of the replacement hair clipper cutter head is flat and sharp, and all kinds of hair can be cut off in one cut, so that the haircut process is smooth and comfortable without pinching hair. The tooth pitch of the worn cutter head is misaligned, and it is easy to have mottled depth and missing cutting areas in haircut. Replace the hair clipper cutter, the cutter's pitch is stable, the lines are clean and neat, and you can also cut the salon-level gradient and inch-level exquisite hairstyle at home. Passivated cutter head is difficult to handle curly hair and thick beard, and needs to be trimmed back and forth repeatedly. Replacing hair clipper cutter head has strong cutting force, which can not only trim long hair and short hair, but also care for sideburns and beards, thus meeting various modeling requirements. It is expensive to replace the whole hair clipper only when the cutter head is worn, and it is even cheaper to replace the hair clipper cutter head alone. Recover the full performance of the equipment with a small cost, and save a lot of home appliance purchase expenses after long-term use. The buckle of aging cutter head is deformed and loose, and it is easy to deviate and shake when trimming, which will damage the hairstyle. The size of the replacement hair clipper cutter head accurately matches the machine body, the buckle is firm and not easy to fall off, and there is no need for tools for disassembly and assembly, so the operation is simple and worry-free.
£66.46
Shipping: Free
Amazon Marketplace - H xinsenH

Slice 10582 Drywall Knife, Trade & DIY Plasterboard Knife - Sturdy Aluminium Handle, Finger-Friendly Ceramic Safety Blade, Easy Blade Change B09SHWVDD8
PURPOSE BUILT: The Slice 10582 Drywall Knife was designed with advice from drywall (plasterboard) professionals. It has the look and feel of a traditional work knife, with a metal handle for a comfortable grip and a locked blade for precise scoring. INTEGRATED SAFETY COVER: The never-lost safety cover is stored neatly out of the way while the knife is in use but can be flipped in position to keep the blade safe while stored. THREE COMPATIBLE BLADES: The knife ships with the #10524 utility blade (rounded tip), and is compatible with the #10523 serrated utility blade and the #10525 utility blade (pointed tip). An extra blade can be stored with easy access at the back of the handle. SAFETY CUTTER: Slice ceramic safety blades feature our finger-friendly edge that cuts effectively, yet is safe to touch; reducing lacerations and avoiding nasty accidents. CERAMIC TECHNOLOGY: Slice’s zirconium oxide blades last up to 11 times longer than metal blades. They're durable, non-magnetic, won't rust and won't conduct electricity., Weight: 0.16975594174 Pounds, Manufacturer: Slice
£29.62
Shipping: Free
Amazon

Sealey Premier Pocket Knife Locking with Quick Change Blade 28757AWUK
• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Supplied with six reversible blades and protective blade cover.• Fitted with positive lock to prevent blade holder folding in use.• Easy-to-use latch for quick blade removal/fitting - no tools required.• Supplied with belt clip.Fitted with positive lock to prevent blade holder folding in use. Easy-to-use latch for quick blade removal/fitting - no tools required. Supplied with belt clip, six reversible blades and protective blade cover.• Supplied with six reversible blades and protective blade cover. • Fitted with positive lock to prevent blade holder folding in use. • Easy-to-use latch for quick blade removal/fitting - no tools required. • Supplied with belt clip. • Model No. PK5Technical Specification:Consumable Parts: AK86/B - Utility Knife Blade Pack of 10Length: Closed; 90mm, Open; 150mmNett Weight: 0.14kgDimensions: Length: 19mm x Height: 217mmWeight: 0.146KgWarranty: 1 year
3 Days
£13.00
Shipping: £3.95
Electrical World
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0


























