Sorry, nothing was found. Please change your selection and try again.
Fischer Anchor Bolts
(201 - 240 of 291 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low

Fischer 507578 Bolts FBN II 20/60 – 507572 B0070MCKDQ
Easy to assemble thanks to a few hammer strokes and minimal slippage. With the long thread, component tolerances are compensated. In addition, the FBN II is suitable for spacing installations, this increases flexibility. With the standard anchoring depth, the FBN II achieves maximum load capacity, meaning fewer attachment points and smaller anchor plates Stainless steel: durable outdoor safety Using the reduced anchoring depth reduces the bore hole depth and simplifies installation, Manufacturer: Fischer
£937.46
Shipping: Free
Amazon

fischer Anchor rod RG M24 x 300 R-10 pieces - item no. 50268 B000WKXZ2S
Anchor rod with sloping roof and hexagonal for easy installation with pre-portioned mortar cartridge. In combination with the various mortar cartridges or injection mortar approved for anchoring in cracked and non-cracked concrete, solid brick masonry, perforated brick masonry and aerated concrete. Non-rusting steel for outdoor use.
£469.67
Shipping: Free
Amazon

fischer 50562 Internal Thread Anchor RG 18 x 125 M 12 I B004MN9ONU
ETA approval for maximum safety Commercial grade screws and threaded rods can be used, this reduces cost and complexity In combination with the various mortar cartridges or injection mortar approved for anchoring in cracked and non-cracked concrete Surface flush disassembly allows re-use of the attachment point, Weight: 5.03535806408 Pounds, Manufacturer: Fischerwerke GmbH & Co. KG
£55.87
Shipping: Free
Amazon

Fischer fixtainer, Wall Anchor Set, 539868 B01N5V4CQJ
SPACIOUS STORAGE BOX: In our handy FixTainer, every dowel, screw, nut and washer will find a fixed place - with removable dividers and up to 6 compartments in total, the box can be individually configured A dowel for all building materials: as an intelligent 2-component dowel, the DuoPower automatically adapts to the requirements of the building material and achieves the highest load values thanks to the three functional principles of folding (perforated building materials), spreading (solid building materials) and knots (panel building materials) Absolutely powerful: the DuoTec tilting dowel is suitable for use in tight, insulated cavities with a low borehole diameter (10 mm) and short, fibreglass-reinforced tilting element and ensures the absorption of high tensile and transverse loads in all panel building materials Areas of application: the powerful dowels are suitable for attaching pictures, mirrors, lamps, kitchen wall cabinets, living room cabinets, shelves, wardrobes and handles in numerous solid and panel building materials such as concrete, sand-lime brick, plasterboard and chipboard Box contents: 1 x FixTainer DuoPower / DuoTec + screw (item no. 539868), dowel set with 200 DuoPower & DuoTec dowels and screws (60 x DuoPower 6 x 30, 30 x DuoPower 8 x 40, 10 x DuoTec 10, 60 x countersunk screw 4. 5 x 4, 5 0 TX, 30 x Countersunk Screw 5.0 x 60 TX, 10 x Pan Head Screw 5.0 x 70 TX) of fischer, Weight: 1.1904962148 Pounds, Manufacturer: Fischerwerke GmbH & Co. KG
£25.24
Shipping: Free
Amazon

Fischer 507578 Bolts FBN II 16/100, galvanised, 507554 B0070MBZXC
Easy installation with a few hammer strikes and minimal slippage Einschlag pin, protects thread from damage, saving you time mounting and demounting With the long threads are component tolerances Ausgegliche, the FBN II is also for distance rigs, this will increase the flexibility With the standard anchor depth achieved the FBN II high load capacity, this means you less attachment points and smaller anchor plates Results in reduced anchor depth being used, decreases the bore hole depth and simplifies the mounting, Manufacturer: Fischer
£71.32
Shipping: Free
Amazon

fischer DIPK 8/120 Insulation Anchor B004MNGWNK
The glass-fibre-reinforced plastic nail (GRP nail) reduces the heat transmission and prevents marks on the plaster surface The simple hammerset installation allows for a quick installation process and thus reduces workload The well-proven design with low anchorage depth reduces the amount of drilling required, thus achieving a high level of efficiency The DIPK can be used universally in rear-ventilated curtain façades, as well as in plaster façades The surface of the anchor plate is suitable to use as a plaster base, Manufacturer: fischer
£67.99
Shipping: Free
Amazon

Bahco Hardware Anchors and Bolts B07T11D279
The head is fixed to the torque wrench with a retractable clamping pin pin Suitable for 74S, 74PS, 75S, 75PS and 76S keys Insert is attached to torque wrench by spring-loaded retractable pin Made with excellent quality materials Very sturdy and durable, Manufacturer: BAHCO
£46.38
Shipping: Free
Amazon

NONE M6 M8 Stainless Steel Countersunk Head Hexagon Socket Expansion Screw Concrete Anchor Built-in Tension Allen Bolt Metal Fastener 1005009796759020
M6 M8 Stainless Steel Countersunk Head Hexagon Socket Expansion Screw Concrete Anchor Built-in Tension Allen Bolt Metal Fastener
£3.89
Shipping: £1.99
AliExpress UK

Fischer 512252 Anchor Rod RG M22 x 280 5.8-5 Pieces Grey B0070MC9DM
Anchor rod with roof sloping and hexagonal for easy installation with pre-portioned mortar cartridge. Galvanised steel for indoor use. In combination with the various mortar cartridges or injection mortar approved for anchoring in cracked and uncracked concrete, solid brick masonry, perforated brick and aerated concrete., Weight: 8.82 Pounds, Manufacturer: fischerwerke GmbH & Co. KG
£58.66
Shipping: Free
Amazon

Fischer 507578 Bolts FBN II 12/100 Hot-Dip Galvanised 507596 B0070MD7I8
Easy installation with a few hammer strikes and minimal slippage Einschlag pin, protects thread from damage, saving you time mounting and demounting With the long threads are component tolerances Ausgegliche, the FBN II is also for distance rigs, this will increase the flexibility With the standard anchor depth achieved the FBN II high load capacity, this means you less attachment points and smaller anchor plates Results in reduced anchor depth being used, decreases the bore hole depth and simplifies the mounting, Manufacturer: Fischer
£228.86
Shipping: Free
Amazon

Fischer, 48222, Internal Thread Anchor RG 10 x 75, M 6 I B004MNEY3K
Standard screws and threaded rods can be used this reduces costs and complexity Surface flush Demontage allows you wieder use of the mounting point In combination with various mortar cartridges or grouting suitable for anchoring into non-cracked concrete, Weight: 0.88 Pounds, Manufacturer: Fischer
£25.97
Shipping: Free
Amazon

fischer 44923 FH II 18/15 SK Heavy Duty Anchor with Approval for Draft Zone Suitable for 20 Pieces B004MN9POI
For attaching steel structures, railings, brackets, ladders, cable trays, machinery, stairs, gates, facades, window elements, etc. European technical approval option 1 for cracked concrete (ETA-07/0025) Approved for draught zones Contents: 20 pieces, Manufacturer: Fischerwerke GmbH & Co. KG
£130.29
Shipping: Free
Amazon

fischer DIPK 8/40 Insulation Anchor B004MNEU02
The glass-fibre-reinforced plastic nail (GRP nail) reduces the heat transmission and prevents marks on the plaster surface The simple hammerset installation allows for a quick installation process and thus reduces workload The well-proven design with low anchorage depth reduces the amount of drilling required, thus achieving a high level of efficiency The DIPK can be used universally in rear-ventilated curtain façades, as well as in plaster façades The surface of the anchor plate is suitable to use as a plaster base, Manufacturer: fischer
£50.99
Shipping: Free
Amazon

Fischer DUOTEC 12 Plasterboard Dowels for M6 Screws, Anchor Fixing for High Loads on Panels and Plates, Hole 12 mm, 544596 B07CHR8D6C
Small hole diameter (10.mm for DUOTEC version 10 and 12.mm for DUOTEC version 12) Two-component tilting element reinforced with fiberglass and collar for high tensile and cutting loads; also thanks to internal metal parts No notches in the support area and therefore no weakening of the plasterboard Flexible locking device for chipboard and metric screws, Weight: 0.7054792384 pounds, Manufacturer: Fischer
£40.30
Shipping: Free
Amazon

fischer High Performance Anchor FH II 12/25 B, 50 Pieces, 48774 B004MNEXNQ
With threaded bolts. The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2). The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points. The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly., Weight: 8.6 Pounds, Manufacturer: fischer
£159.04
Shipping: Free
Amazon

fischer 509230 Anchor Rod FIS A M 8 x 1000 R-70 B0070MCVJE
The universal solution for various Fischer injection mortars, for a manageable assortment and simplified storage Stainless steel for outdoor use In combination with the various Fischer injection mortars approved for anchoring in cracked and non-cracked concrete, solid masonry, perforated brick masonry and aerated concrete Sold by the metre for cutting down according to your needs Optimal load adjustment thanks to variable anchoring depth. This reduces assembly and material costs, Weight: 6.83 Pounds, Manufacturer: Fischerwerke GmbH & Co. KG
£87.76
Shipping: Free
Amazon

fischer High Performance Anchor FH II 15/25 SK with countersunk Head, 25 Pieces, 44921 B004MNH1NA
The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2). The low profile of the screw head ensures for a discreet fixing. The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required. The optimised geometry intelligently reduces the energy required for assembly. The approval regulates the use of hollow drills., Manufacturer: fischer
£93.62
Shipping: Free
Amazon

Fischer 507578 Bolts FBN II 10/100 Hot-Dip Galvanised 507583 B0070MCQJ4
Easy installation with a few hammer strikes and minimal slippage Einschlag pin, protects thread from damage, saving you time mounting and demounting With the long threads are component tolerances balanced, the FBN II is also for distance rigs, this will increase the flexibility With the standard anchor depth achieved the FBN II high load capacity, this means you less attachment points and smaller anchor plates Results in reduced anchor depth being used, decreases the bore hole depth and simplifies the mounting, Weight: 4.3210603352 pounds, Manufacturer: Fischer
£57.20
Shipping: Free
Amazon

fischer Anchor Rod RG M20 x 500 5.8-10 Pieces - Item No. 95725, Grey B004MNDARQ
Anchor rod with sloping roof and hexagonal for easy installation with pre-portioned mortar cartridge. Galvanised steel for indoor use. In combination with the various mortar cartridges or injection mortar approved for anchoring in cracked and non-cracked concrete, solid stone masonry, perforated stone masonry and aerated concrete. Country of origin: Czech Republic
£168.94
Shipping: Free
Amazon

fischer High Performance Anchor FH II 12/50 S with Hexagonal Head, 25 Pieces, 44886 B001Z6HLNW
The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2). The low profile of the screw head ensures for a discreet fixing. The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required. The optimised geometry intelligently reduces the energy required for assembly. The approval regulates the use of hollow drills., Weight: 2.20462262 pounds, Manufacturer: fischer
£114.17
Shipping: Free
Amazon

Fischer aerated concrete anchor, FPX M 8 I, 519022, 25 pack B00BTFXP8E
Automatic set control ensures maximum safety. Metal anchor for aerated concrete. Easy and effortless installation without the need for additional tools. High load-bearing capacity: Expansion sleeve creates an undercut, which means fewer fixing points. Prevents the rotation of the anchor in the drill hole., Weight: 2.77 Pounds, Manufacturer: Fischer
£74.75
Shipping: Free
Amazon

fischer High Performance Anchor FH II 12/15 SK with countersunk Head, 25 Pieces, 44917 B004MN9NWM
The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2). The low profile of the screw head ensures for a discreet fixing. The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required. The optimised geometry intelligently reduces the energy required for assembly. The approval regulates the use of hollow drills., Weight: 3.84 Pounds, Manufacturer: fischer
£72.22
Shipping: Free
Amazon

Bahco Hardware Anchors and Bolts B07T21HR7F
The head is fixed to the torque wrench with a retractable clamping pin pin Suitable for 74S, 74PS, 75S, 75PS and 76S keys Insert is attached to torque wrench by spring-loaded retractable pin Made with excellent quality materials Very sturdy and durable, Manufacturer: BAHCO
£97.20
Shipping: Free
Amazon

fischer High Performance Anchor FH II 15/15 SK with countersunk Head, 25 Pieces, 44920 B004MNH1H6
The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2). The low profile of the screw head ensures for a discreet fixing. The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required. The optimised geometry intelligently reduces the energy required for assembly. The approval regulates the use of hollow drills., Manufacturer: fischer
£117.31
Shipping: Free
Amazon

Fischer 507578 Bolts FBN II 8/70 Hot-Dip Galvanised 507578 B0070MDIC8
Easy to assemble thanks to a few hammer strokes and minimal slippage. Impact pin protects thread from damage, saving time when mounting and disassembling. With the long thread, component tolerances are equalised, and the FBN II is suitable for spacing installations, this increases flexibility With the standard anchoring depth, the FBN II achieves maximum load capacity, meaning fewer attachment points and smaller anchor plates Using the reduced anchoring depth reduces the bore hole depth and simplifies installation, Weight: 2.1164377152 Pounds, Manufacturer: Fischer
£44.75
Shipping: Free
Amazon

Fischer DUOTEC 12 Plasterboard Dowels with M6 Metric Screw, Anchor Fixing for High Loads on Panels and Plates, 12 mm Hole with Screw 544597, Grey B07CKFFF3B
Small hole diameter (10.mm for DUOTEC version 10 and 12.mm for DUOTEC version 12) Two-component tilting element reinforced with fiberglass and collar for high tensile and cutting loads; also thanks to internal metal parts No notches in the support area and therefore no weakening of the plasterboard Flexible locking device for chipboard and metric screws, Manufacturer: Fischer
£55.48
Shipping: Free
Amazon
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0







