Sorry, nothing was found. Please change your selection and try again.
Cobalt Drill Bits
(41 - 80 of 856 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low

Drill America 1-1/2" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series B00FXH85UW
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools Round shanks allow use with a wide variety of toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Manufactured to National Aerospace standard 907
£135.93
Shipping: Free
Amazon

Surtek High-Speed Drill Bits - Set of 29 Drill Bits for Metals with Cobalt Plating - JBAV29 UK-UGECZ4414BCFBCBX5CSZB
Set of 29 high speed steel drill bits with cobalt Surtek Drill bits: from 1/16" to 1/2". High speed steel m35. Starting at 1/8" 135° self Starting at 3/16” non
£209.93
Shipping: Free
Amazon Marketplace - CAPITARE LIMITED

Drill America 17.50mm Reduced Shank Cobalt Drill Bit with 1/2" Shank, D/AMMCO Series SF-42960045341
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools Round shanks allow use with a wide variety of toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Manufactured to National Aerospace standard 907
£66.34
Shipping: Free
Amazon Marketplace - EGNC LTD

Drill America 13.50mm Reduced Shank Cobalt Drill Bit with 1/2" Shank, D/AMMCO Series SF-42960112260
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools Round shanks allow use with a wide variety of toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Manufactured to National Aerospace standard 907
£67.13
Shipping: Free
Amazon Marketplace - EGNC LTD

Drill America R Cobalt Drill Bit (Pack of 6), DWDCO Series B00FXHGV94
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools Round shanks allow use with a wide variety of toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Manufactured to National Aerospace standard 907
£29.50
Shipping: Free
Amazon

Drill America - DWDCO3/4 3/4" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series B00FXHALYU
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools Round shanks allow use with a wide variety of toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Manufactured to National Aerospace standard 907
£30.17
Shipping: Free
Amazon

Drill America DWDCO6P12#6 Cobalt Drill Bit (Pack of 12), DWDCO Series 1-4145-B00FXHE0EW-____________
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools Round shanks allow use with a wide variety of toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Ideal for drilling in tough, high tensile strength materials
£32.63
Shipping: Free
Amazon

Sealey Metric Cobalt Drill Bit Set (25 Pieces) - AK4702 3B-4WSR-6F3U
Fully ground HSS with 5% cobalt mAKes these ideal for drilling extra hard materials 135 degrees split point tip enables bits to bite work piece quickly reducing the need for centre mark Drills can be re-sharpened without affecting their performance Supplied in metal storage case Sizes: 1-13 mm in 0.5 mm increments, Weight: 2.9982867632 Pounds, Manufacturer: Sealey
£79.95
Shipping: Free
Amazon Marketplace - KING_TOOLS

Silverline 783089 Cobalt Drill Bit Set 25pce 1 - 13 mm , Blue B000LFVYL8
M35 high speed steel with 5 percent cobalt for strength and wear resistance 135° split point prevents walkaround Fully ground with amber finish to DIN338 Always use cooling agent 1 - 13 mm in 0.5 increments, Weight: 2.98285440486 Pounds, Manufacturer: SLTL4
£77.79
Shipping: Free
Amazon

Mibro 492261 Cobalt Tri-Bore Drill Bit Set, 17-Piece B09GSB94SF
Suitable for the heaviest and most demanding user, for drilling in all ferrous and nonferrous metals, including hard steels like stainless steel Made with M35 steel containing 5% cobalt for superior strength and heat resistance Features a thicker core, increasing the drill bit's rigidity and strength Material: Cobalt Pack of: 17 | Included Drill Bits: 1/16 in (1.59 mm) (x2), 5/64 in (1.98 mm), 3/32 in (2.38 mm), 7/64 in (2.78 mm), 1/8 in (3.18 mm) (x2), 9/64 in (3.57 mm), 5/32 in (3.97 mm), 11/64 in (4.37 mm), 3/16 in (4.76 mm), 13/64 in (5.16 mm), 7/32 in (5.56 mm), 15/64 in (5.95 mm), 1/4 in (6.35 mm), 5/16 in (7.94 mm), 3/8 in (9.53 mm)
£63.18
Shipping: £9.35
Amazon Marketplace - Amazon US

Drill America - DWD29J-CO-PC 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16" - 1/2" X 64ths), DWDCO Series B00FXGOMIW
Set of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials Gold oxide finish lubricates the drill bit and provides wear resistance Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging Meets ANSI specifications
£115.88
Shipping: Free
Amazon

Dewalt DT5935-QZ 10 Piece Extreme Cobalt Metal Drill Bits B0BCQPBCVV
Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 The 'no-walk' tip allows for easier penetration of all surfaces, 5 mm and above Cleaner, more accurate, burr-free holes due to recessed cutting wings No slip shank; spin proof three sided shaft for optimal grip in drill chuck
£49.99
Shipping: Free
Amazon

Bosch CO21B 21 pc. Cobalt M42 Drill Bit Set B07Q64LTFB
Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits High-heat resistant bits – withstand high-temperature applications for extended periods of time Thick web-helix design – provides additional stability in tough applications.Case Type:Plastic Surface-hardened tip – penetrates tough abrasive materials Split points on bits 1/8 In. and larger – allow for easy starts with no skating, eliminating the need for a center punch Three-flat shank on bits 3/16 In. and larger – deliver better bit grip, Manufacturer: BOSCH
£78.32
Shipping: Free
Amazon

Vorteck Cobalt HSS Drill Bits Set, 6-pcs B0FDLBDGNH
Advanced Vorteck Tip Technology: Precision-engineered Vorteck tip technology revolutionizes the drilling process by breaking it down into multiple micro-cuts, efficiently dispersing swarf to enhance cutting speed and ensure a smoother operation Versatile Application: Designed for high-performance in tough materials such as high-strength steels, stainless steels, cast iron, as well as nonferrous metals, plastics, and wood, delivering exceptional versatility across demanding applications M35 Cobalt Construction: Constructed with high-grade M35 HSS with 5% Cobalt, these bits are engineered for superior heat dissipation, extending tool life and reducing the risk of burnout in heavy-duty applications Quick Lock Hex Shank: Equipped with a 6.3mm (¼”) quick-lock hex shank, compatible with impact drivers and standard drill chucks, allowing for fast, secure bit changes and enhanced user convenience Contents of set: each 1 piece in sizes 3, 4, 5, 6, 8 and 10 mm, Manufacturer: Carl Kammerling International
£32.99
Shipping: Free
Amazon

fischer 543330 Cobalt Drill Bits (25 Pieces), Grey, Set of Pieces B08L5897X7
Main advantages: Fischer Hss-Co drill bits are perfect for drilling in hard metals such as Inox. Being milled can be re-sharpened increasing its service life, plus the cobalt alloy and the 135 degree angle on the tip also make the drill bit more durable. How to use: We put the drill bit into the drill, make sure the striker is disabled, lower the machine revolutions and cool for best results while drilling. Applications: This product is designed to drill hard metals such as stainless steel. Sustainability: Fischer stands for the production and distribution of sustainable products, taking care of the highest demands in terms of sustainability. Box contents: 25 fischer HSS-Co drill bits, Weight: 3.2187490252 Pounds, Manufacturer: fischer
£108.28
Shipping: Free
Amazon

HSS Cobalt Blacksmith Drill Bit Reduced Shank Drills Metric Sizes 1mm - 10mm
HSS Cobalt Blacksmith Drill Bit Reduced Shank Drills Metric Sizes 1mm - 10mm, Home, Furniture & DIY > DIY Tools & Workshop Equipment > Power Tool & Air Tool Accessories > Drill Bits
£50.99
Shipping: Free
eBay - asellerltd211118

Dewalt DT5935-QZ 10 Piece Extreme Cobalt Metal Drill Bits 5035048544877
Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 The 'no-walk' tip allows for easier penetration of all surfaces, 5 mm and above Cleaner, more accurate, burr-free holes due to recessed cutting wings No slip shank; spin proof three sided shaft for optimal grip in drill chuck
£53.82
Shipping: Free
Amazon Marketplace - Verkter GB

Dewalt DT5935-QZ 10 Piece Extreme Cobalt Metal Drill Bits 5035048544877
Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 The 'no-walk' tip allows for easier penetration of all surfaces, 5 mm and above Cleaner, more accurate, burr-free holes due to recessed cutting wings No slip shank; spin proof three sided shaft for optimal grip in drill chuck
£49.99
Shipping: Free
Amazon

Drill America 15 Piece Cobalt Drill Bit Set with Gold Finish in Round Case (1/16" - 1/2" x 32nds), DWDCO Series B0DVF53Z91
HEAVY DUTY DRILL: Manufactured to National Aerospace Standard 907 and made of heat-resistant cobalt, these drill bits display higher red hardness which permits speeds up to 30% greater than high speed steel drills BEST USES: The m35 5% cobalt drills are effective in drilling tough, high tensile strength materials such as Inconel, stainless steel and titanium, as well as wood, plastic and other hard metals 135 DEGREE CUTTING ANGLE: Jobber length drill bits have a 135 degree split point for self-centering, fast penetration, and drilling with precision INCH SIZES INCLUDED: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32" and 1/2" ABOUT DRILL AMERICA: Drill America specializes in supplying a full line of industrial and contractor cutting tools since 1923; Our products include drills, taps and dies, reamers, end mills, carbide burs, countersinks and more
£54.59
Shipping: £9.82
Amazon Marketplace - Amazon US

Bahco Cobalt 7mm Drill Bits 10 Pack 145844597
Cobalt high‑speed steel for long life and high performance 135° angle and split tip for precise self‑centering and speed Compatible with CNC and conventional drills up to 500W Designed for stainless steel cast iron and heat‑resistant alloys Pack of 10 bits for versatile drilling tasks
£47.73
Shipping: Free
Amazon
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0















