Sorry, nothing was found. Please change your selection and try again.
Audio Connectors
(561 - 600 of 2,009 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low

CIHATSLN 20pcs/lot 4MM Banana Audio Speaker Connectors, Banana Connector for Binding Post Amplifier for Cable Terminals (Green 20Pcs)
connectors 20pcs/lot 4MM Banana Audio Speaker Connectors, Banana Connector for Post Amplifier Binding for Cable Terminals
£64.99
Shipping: Free
Amazon Marketplace - maruibin1696

CIHATSLN 20pcs/lot 4MM Banana Audio Speaker Connectors, Banana Connector for Binding Post Amplifier for Cable Terminals (Blue 20Pcs)
connectors 20pcs/lot 4MM Banana Audio Speaker Connectors, Banana Connector for Post Amplifier Binding for Cable Terminals
£64.99
Shipping: Free
Amazon Marketplace - maruibin1696

CIHATSLN 20pcs/lot 4MM Banana Audio Speaker Connectors, Banana Connector for Binding Post Amplifier for Cable Terminals (Red 20Pcs)
connectors 20pcs/lot 4MM Banana Audio Speaker Connectors, Banana Connector for Post Amplifier Binding for Cable Terminals
£64.99
Shipping: Free
Amazon Marketplace - maruibin1696

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Orange) YSAFYTDYC-ORANGE-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - youciyunbaihuodian

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Blue) WOAKWPFWB-BLUE-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - yuejinbaihuo

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Black) WOAKWPFWB-BLACK-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - yuejinbaihuo

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Red) WOAKWPFWB-RED-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - yuejinbaihuo

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Yellow) WOAKWPFWB-YELLOW-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - yuejinbaihuo

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Black) YSAFYTDYC-BLACK-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - youciyunbaihuodian

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Blue) YSAFYTDYC-BLUE-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - youciyunbaihuodian

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Yellow) YSAFYTDYC-YELLOW-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - youciyunbaihuodian

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Red) YSAFYTDYC-RED-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - youciyunbaihuodian

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Orange) WOAKWPFWB-ORANGE-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - yuejinbaihuo

Audio Equipment Connector, Rotatable Right Angle XLR to RCA Adapter Ensuring High-Quality Signal Transmission, Compact Design for Convenient Handling
Step into the world of seamless audio connectivity with our XLR to RCA adapter, designed for the modern musician and audio enthusiast. Its durable...
£69.58
Shipping: Free
OnBuy

Gold Plated Power Plug Hi End Audio Power Connector Exquisite Craftsmanship Performance Secure Connectivity Wide Compatibility Insulation Treatment
Crafted for those who refuse to compromise on sound quality, this Gold Plated Power Plug brings together luxury design and technical brilliance.
£115.45
Shipping: Free
OnBuy

Audio Power Connector, Brass Gold Plate HiFi Audio Power Plug with Wide Compatibility for Professional AV Equipment, Anti-Corrosion Pure Copper Conduc
Immerse yourself in the world of high-fidelity audio with our precision-engineered power connector. Designed for professionals and audiophiles alike,
£130.64
Shipping: Free
OnBuy

CIHATSLN 8pcs 4mm Audio Speaker Connector with Banana Head Speaker Cable Line Amplifier Speaker Terminal Connector Gold Plated(8 Blue)
connectors 8pcs 4mm Audio Speaker Connector with Banana Head Speaker Cable Line Amplifier Connector Speaker Terminal Gold Plated
£57.20
Shipping: Free
Amazon Marketplace - zhangguangjin1694

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Mix Colors) YSAFYTDYC-MIXCOLORS-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - youciyunbaihuodian

8pcs 4 Pole Speakon Male Plug Audio Connector NL4FX Compatible 30A/50A High Current Twist Lock for PA Amplifier Speaker Cable(Mix Colors) WOAKWPFWB-MIXCOLORS-4PINS
🔒 Twist Lock – No Mid-Show Disconnects – Banana plugs or 1/4" jacks vibrate loose during heavy bass hits, killing your sound. Our NL4FX-compatible 4‑pole plug features a precision twist lock system — insert, turn clockwise, and it stays locked until you deliberately unlock it. Zero accidental disconnects. ⚡ 30A RMS / 50A Audio Signal – High Current Capacity – Standard 1/4" connectors overheat and fail under high power. NL4FC connectors are rated 30A RMS continuous, while our NL4FX-compatible version handles up to 50A audio signal (50% duty cycle). Delivers clean, uninterrupted power to subwoofers, line arrays and full PA stacks without signal loss or melting. 🎚️ 4‑Pole Design – Bi‑Amp & Sub‑Satellite Systems Ready – NL2 connectors limit you to a single speaker circuit. Our 4‑pin design gives you two independent pin sets (1+/1- and 2+/2-). Run main speakers on one pair, subwoofer on the other — one cable, cleaner setup, total system control. 🔧 Screw Terminals – No Soldering Required – Soldering in dark amp racks is slow and risky. Our plug uses clear screw‑terminal contacts — strip 25mm of cable jacket, expose 12mm of bare wire per conductor, insert into labeled slots (1+/1-/2+/2-), and tighten with a Pozidriv screwdriver. No soldering iron, no heat gun, no special tools. 🛡️ 8‑Pack Value – Build Your Entire PA System – Running out of connectors mid-cable-build delays your setup. 8 pieces give you enough for full stage rigs, studio patchbays, and multiple speaker cabinets. Rugged construction withstands 5,000+ mating cycles and -30°C to +80°C temperatures. NL4FX connectors also feature a larger latch release and integrated one-piece strain relief that fits 6‑14mm cable OD — easier assembly and better cable grip for touring applications.
£51.94
Shipping: Free
Amazon Marketplace - yuejinbaihuo

High-Quality Rhodium Plated Audio Rca Connectors, Shielded To Block External Noise For Crystal Clear Hifi Sound, Perfect For Your Home Theater System
Dive into the world of high-fidelity sound with our expertly crafted RCA connectors. Designed for music lovers seeking the ultimate listening...
£50.35
Shipping: Free
OnBuy
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0

















