Sorry, nothing was found. Please change your selection and try again.
1 Channel Amplifiers
(521 - 560 of 1,216 results)
Filters
Best Match
Best Match
Price: Low to high
Price: High to low

NONDK D185 2.1 Channel Digital Amplifier with TPA3255 Dual-Core Chipset High-Power Fiber Coaxial USB Bluetooth 5.4 ES9038 Decoding 09w549epF6wgxPO6dW18oQK22HX
D185 is a newly designed digital amplifier, using two TPA3255 digital amplifier chips to form a 2.1 channel system, with an output power of 300W*2/4Ω +600W/2Ω, and very low distortion. The three mechanical meter heads design takes the overall style to a higher level. D185 supports multiple inputs including optical fiber, coaxial USB, Bluetooth, and analog inputs, and is very powerful. All digital inputs enter the ES9038Q2M decoding, so the effect resolution is very good and the sound field is huge. The Bluetooth module uses the new QCC3084, supports Bluetooth 5.4, supports LDAC, aptxlossless, and supports a maximum sampling rate of 24bit/96K. D185 has a built-in large radiator to long-term stable operation, and a large-capacity capacitor array makes the power supply more stable, and the sound is not soft under large dynamics. The USB input uses the PCM2706 chip.
£119.93
Shipping: Free
Amazon Marketplace - focn

Musway ONE1000
Mono Class D amplifier with 1300 W power1 x 400 watts RMS at 4 ohms, 1 x 650 watts RMS at 2 ohms, 1 x 1050 watts RMS at 1 ohmHighand low-level inputs, EPS and automatic turn-on functionSubsonic filter from 10 to 40 Hz, low-pass filter from 40 to 150 HzBass boost from 0 to 18 dB, phase control from 0 to 180°Heat sink and end panels made of brushed aluminumDimensions: Height 15 cm, Length 24 cm, Width 4.5 cm
£295.99

Torribaly 10X 2.1 Channel Digital Power Amplifier Board 2X25W+50W 5.0 Subwoofer Class D Audio Amplifier Board 12-20V OPC-PWMJFCM-NEW
Product name: 2.1 channel subwoofer power amplifier board Supply voltage: 12-20V Supply current: 3-5A Maximum power: 2 x 25W+50W 8ohm Minimum power:...
£87.77
Shipping: Free
OnBuy

Taramps BASS 400 1 Ohm 1 Channel Mosfet Amplifier 400 Watts RMS, Monoblock, Crossover, Bass Boost, RCA/High Level Input, Class D, Car Audio, Monitor Level Remote/M1 Led Monitor, Great for Subwoofers B0DGQQG56D
The Taramps Bass Line amplifiers offer outstanding power and efficiency for subwoofers, enhancing sub-bass and bass frequencies with superior performance. The Bass 400 has 400 Watts RMS rated at 1, 2 and 4 Ohms, in addition to being a monoblock amplifier, It has MOSFET power supply. is the perfect choice for those who want superior performance in sub and bass frequencies. Taramps BASS 400 at 1 Ohm, Frequency Response: 8Hz - 250Hz. Designed for subwoofers, this amplifier offers excellent low-frequency performance and includes features like Crossover, Input settings, Gain Control, Bass Boost, and compatibility with the Taramps Monitor Level Remote. Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction. Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it. Short Circuit Protection: Disconnects the audio signal if a short circuit or excessive impedance is detected. Thermal Protection: Turns off the audio signal if the heatsink overheats. The power supply cable is 9 AWG, while the output cables are 13 AWG and the remote cable is 18 AWG. A 40A circuit breaker or fuse is recommended. Compatible with all types of Subwoofers. Dimensions: 5.28" x 1.57" x 5.43", Weight: 1.26lbs
£60.29
Shipping: £11.25
Amazon Marketplace - Amazon US

Taramps Smart 8 Bass Class D Multi-Impedance Amplifier (1 Channel 8000 Watts RMS) B0C9S5MP6F
The Smart Bass line are Multi Impedance amplifiers with exclusive technology, operating between 0.5 and 2 ohms. The Smart 8 Bass is 8000 Watts RMS rated at 0.5 to 2 Ohms, with 1 channel of 8000 Watts RMS and is a MONO amplifier. The Positive/Negative power supply cable is 2 x 2/0 AWG. The output cables wire gauge are 7 AWG and the remote cable is 18 AWG. 360A circuit breaker or a fuse is recommended Crossover: HPF 8Hz ~ 30Hz (-12dB/8ª) Variable / 60Hz ~ 200Hz (-12dB/8ª) Variable; Bass Boost: Freq 35Hz ~ 55Hz / Boost 0 ~ +10dB and GAIN control. Dimensions (W x H x L): 9.37" x 2.80" x 20.16" / Weigth: 16.39lb
£611.30
Shipping: £49.01
Energy Rating: 86%
Amazon Marketplace - Amazon US
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0


































