Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 40 of 66 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Audio Technica AT-VMN95SH
Replacement or upgrade stylus for AT-VM95 cartridgeNude Shibata stylus for high-end audio qualityCompatible with all VM95 cartridgesEasy to upgrade or replace the stylusSquare shaft, nude stylus design
£148.95
Audio Technica AT-LP140XP
TurntableDrive Type: Direct driveRotational Speed: 33 1/3 rpm, 45 rpm, 78 rpmPitch Control: YesConnections: Audio output (RCA)Dimensions: W452 mm x H159 mm x D352 mmWeight: 10 kg
£379.00
Audio Technica AT-VM95ML/H
CartridgeSystem Type: VM stereo dual magnet systemStylus Profile: MicrolinearTracking Force: 2 gFrequency Range: 20 Hz - 25 kHzChannel Separation: 23 dBMaterial: AluminumDimensions: W21 mm x H21 mm x D62 mm
£171.71
Audio Technica AT-OC9XML
CartridgeSystem Type: Dual Moving CoilStylus Profile: MicrolinearTracking Force: 2 gFrequency Range: 20 Hz - 47 kHzChannel Separation: 27 dBDimensions: W16.8 mm x H17.3 mm x D25.7 mmWeight: 7.6 g
£444.60
Audio Technica ATN91
Replacement stylus for AT91 cartridgeType: ellipticalCut: conical diamondCompatible with turntables
£15.99
Audio Technica AT-VMN95ML
2.2 x 0.12 mm aluminum cantileverMicrolinear stylus with square shaftBetter high-frequency tracing, less wear, and fewer distortions than elliptical or conventional line-contact styliOriginal replacement stylus for AT-VM95MLSuitable for TV, Video & Audio > TV & Home Audio Parts > Turntable PartsMicrolinear replacement stylus (2.2 x 0.12 mil) for AT-VM95ML cartridges
£134.00
Audio Technica AT-VM95ML
MM cartridge systemStylus Profile: MicrolinearTracking Force: 2 gFrequency Range: 20 Hz - 25 kHzMaterial: diamondWeight: 6.1 g
£144.00
Audio Technica AT-ART9
Moving coil cartridge with non-magnetic coreShibata stylus on solid boron cantilever (0.28 mm)Inverted V-design for precise sound localizationNeodymium magnet and Permendur yoke for increased magnetic energyOutput voltage of 0.2 mV (1 kHz, 5 cm/sec)PCOCC coils for faithful signal transmissionEasy installation thanks to threaded mounting holes
Audio Technica AT-VM95SH
CartridgeSystem Type: VM Stereo Dual MagnetStylus Profile: ShibataTracking Force: 2.2 gFrequency Range: 20 Hz - 25 kHzChannel Separation: 23 dBDimensions: W18.9 mm x H17.2 mm x D28.3 mmWeight: 6.1 g
£178.95
Audio Technica AT-XP7
CartridgeSystem Type: Moving MagnetStylus Profile: EllipticalTracking Force: 4 gFrequency Range: 20 Hz - 20 kHzVertical scanning angle: 20°Load impedance: 47 kOhmWeight: 6.2 g
£149.99
Audio Technica AT-VM95EN/H
AT-VM95EN/H Moving Magnet Cartridge incl. AT-HS6 HeadshellFrequency response: 20 23,000 HzChannel separation: 22 dB (1 kHz)Output voltage: 3.5 mV (at 1 kHz, 5 cm/s)Stylus shape: Elliptical stylusWeight: 15.5 gDimensions: 21.2 × 21.4 × 62.4 mm (HxWxD)
£143.95
Audio Technica AT-VM750xSH
Shibata stylus with extended contact area for ultra-high frequenciesLighter stylus tip for precise tracking of vinyl groovesDual Moving Magnet cartridge with Shibata stylusSolid boron cantilever for faster vibration transmissionDie-cast aluminum housing to reduce vibrationsHigh channel separation and extended frequency responseMaterial and design for detailed sound and precise dynamic response
Audio Technica AT-VMN95E
Elliptical replacement needle with aluminum cantileverElliptical stylus and glued round shaftReplacement stylus for cartridgeStylus tip: ellipticalMaterial: aluminum
£27.99
Audio Technica AT-XP5
CartridgeStylus Profile: EllipticalTracking Force: 4 gFrequency Range: 20 Hz - 18 kHzChannel Separation: 20 dBWeight: 6.2 g
£62.35
Audio Technica AT33PTG/II
CartridgeSystem Type: Dual Moving CoilStylus Profile: MicroLinearFrequency Range: 15 Hz - 50 kHzChannel Separation: 30 dBDimensions: W16.6 mm x H16 mm x D26.5 mmWeight: 6.9 g
Audio Technica VMN30EN
Original replacement stylus for VM 530 EN turntableElliptical, naked stylus with round shankTip size: 0.3 x 0.7 milSuitable as a replacement stylus for VM530ENCompatible with turntables and record playersIdeal for TV, video & audio applications
£119.99
Audio Technica ATN95EX
Replacement needleStylus tip: ellipticalTracking force: 2.0 gStylus compliance: 15
£22.99
Audio Technica AT-VM95C/H
Moving Magnet Cartridge AT-VM95C/H incl. AT-HS6 HeadshellFrequency Range: 20 20,000 HzChannel Separation: 18 dB (1 kHz)Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)Vertical Tracking Force Range: 1.8 2.2 gStylus Shape: ConicalWeight: 15.5 gDimensions: 21.2 × 21.4 × 62.4 mm
£59.99
Audio Technica AT-OC9XEN
Dual moving coil stereo cartridge with elliptical nude stylusLow-mass elliptical nude stylus and aluminum cantileverNeodymium magnet and pure iron pole piece for increased magnetic energyThreaded inserts in cartridge bodyAluminum body minimizes vibrations and reduces resonancePCOCC coils for pure signal transmissionDimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm
£275.00
Audio Technica AT-VM95SH/H
CartridgeSystem Type: VM Stereo Dual MagnetStylus Profile: ShibataTracking Force: 2.2 gFrequency Range: 20 Hz - 25 kHzChannel Separation: 23 dBDimensions: W21.4 mm x H21.2 mm x D62.4 mmWeight: 15.5 g
£197.95
Audio Technica AT-LH11H
Universal ½" aluminum headshell weighing 11 gCompatible with a wider range of cartridges and turntablesThrough holes without threads for cartridges with threaded mountingHard-anodized surface reduces vibrationsOFC lead wires for optimal sound qualityAdjustable cylinder for precise azimuth and overhang settingsIncludes mounting hardware (screws, washers, hex key)
£84.95
Audio Technica AT-VM95SP
CartridgeStylus Profile: ConicalTracking Force: 5 gFrequency Range: 20 Hz - 20,000 HzChannel Separation: 1.5 dBMounting Distance: 12 mmDimensions: W18.9 mm x H17.2 mm x D28.3 mmWeight: 6.1 g
£78.95
Audio Technica VM670SP
Mono cartridgeStylus Profile: ConicalFrequency Range: 20 Hz - 20 kHzDimensions: W17 mm x H17.3 mm x D28.2 mmWeight: 6.4 g
£119.95
Audio Technica AT-VM95SP/H
AT-VM95SP cartridge from the VM95 seriesMounted on AT-HS6BK headshellStylus compatibility: conical, elliptical, or microlinear stylusFrequency response: 20 20,000 HzOutput voltage: 2.7 mV at 1 kHz, 5 cm/sVertical tracking angle: 23 degreesWeight: 15.5 gDimensions: H21.2 W21.4 mm
£92.34
Audio Technica AT-OC9XEB
Cartridge systemStylus Profile: EllipticalFrequency Range: 20 Hz - 30 kHzWeight: 7.6 g
£219.00
Audio Technica AT-OC9XSH
CartridgeStylus Profile: ShibataTracking Force: 2 gFrequency Range: 20 Hz - 47 kHzChannel Separation: 27 dBWeight: 7.6 g
£519.00
Audio Technica AT-VM670xSP
Dual moving magnet cartridge for mono records at 78 rpmConical stylus for precise audio playbackHigh transient response thanks to para-toroidal coil designInternal circuitry to reduce noise interferenceFrequency range from 20 to 20,000 HzDimensions: 28 mm height, 18.3 mm width, 17.6 mm depth
£124.95
Audio Technica AT81CP
Replacement model for AT300P, AT3482, AT3482H/U, AT3482P, and AT90CDCompatible with P-Mount turntables0.6 mil bonded round-shank designFrequency range: 20 20,000 HzChannel separation: 18 dB at 1 kHzVertical tracking angle: 20°
£25.99
Audio Technica AT-VM95EN
CartridgeSystem Type: VM stereo dual magnet systemStylus Profile: EllipticalTracking Force: 2.2 gFrequency Range: 20 Hz - 23 kHzChannel Separation: 22 dBDimensions: W18.9 mm x H17.2 mm x D28.3 mmWeight: 6.1 g
£114.95
Audio Technica AT-VMN95C
Conical replacement stylus for AT-VM95 cartridgeCompatible with VM95 series4 styles: Elliptical, Elliptical Nude, Microlinear, ShibataGentle cleaning for diamond styliConductive carbon fibersRemoves static charges and dustReplaceable stylus tips for long-lasting use
£15.14
Audio Technica VMN40ML
Replacement needleSuitable for: Audio Technica VM740ML, VM540MLSquare cut
£159.00
Audio Technica VM520EB
CartridgeSystem Type: VMStylus Profile: EllipticalTracking Force: 2.2 gFrequency Range: 20 Hz - 23 kHzChannel Separation: 27 dBDimensions: W17 mm x H17.3 mm x D28.2 mmWeight: 6.4 g
£100.50
Audio Technica ATN85EP
Replacement stylus for AT85EP turntableElliptical tip, tracking force: 1.0-1.5 gCompatible with AT85EP cartridgeDimensions: 6.5 x 19.5 x 10.1 cm (L x H x W)
£24.95
Audio Technica AT-VM760xSL
Dual moving magnet cartridge with special line contact stylusSolid boron cantilever for precise vibration transmissionAluminum die-cast housing to reduce unwanted resonancesPara-toroidal coil design for improved channel separationFrequency range from 20 to 30,000 HzCompatible with all half-inch cartridge headshellsDimensions: 29 mm height, 18.3 mm width, 17.5 mm depth
£519.00
Audio Technica VM530EN
CartridgeSystem Type: VMStylus Profile: EllipticalTracking Force: 2.2 gFrequency Range: 20 Hz - 25 kHzChannel Separation: 27 dBDimensions: W17 mm x H17.3 mm x D28.2 mmWeight: 6.4 g
£129.00
Audio Technica AT-VM95E/H
Complete system with AT-VM95E cartridge and AT-HS6BK headshellDual Moving Magnet system, successor to the AT95EStylus with mounted elliptical diamond tipOutput voltage: 4.0 mV, tracking force: 1.8g to 2.2gRecommended load impedance: 47,000 Ω, load capacitance: 100-200 pFFrequency range: 20 22,000 HzPre-mounted on AT-HS6BK headshell with die-cast aluminum housing
£79.00
Audio Technica AT85EP
Phono cartridge for pickupP-Mount (T4P) compatible0.3 mm x 0.7 mm elliptical cartridgeSuitable for P-Mount turntablesPrecision engineeringMaterial: plastic
£29.45
Audio Technica VM520EB/H
CartridgeSystem Type: VM TypeStylus Profile: Elliptical BondedTracking Force: 2.2 gFrequency Range: 20 Hz - 23 kHzChannel Separation: 27 dBDimensions: W17 mm x H17.3 mm x D28.2 mmWeight: 6.4 g
£139.90
Audio Technica VM740ML
CartridgeSystem Type: VM TypeStylus Profile: MicroLineTracking Force: 2.2 gFrequency Range: 20 Hz - 27 kHzChannel Separation: 28 dBWeight: 8 g
Audio Technica AT-OC9XSL
CartridgeSystem Type: Dual Moving CoilStylus Profile: Special Line ContactTracking Force: 2.2 gFrequency Range: 20 Hz - 50 kHzChannel Separation: 28 dBWeight: 7.6 g
£607.97
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
