Sorry, nothing was found. Please change your selection and try again.
StarTech.com Controllers
Sort by:Best Match
Price: Low to high
Price: High to low
StarTech.com 4-Port M.2 NVMe to SATA Adapter Card (4P-SATA-M2-ADAPTER)
M.2 to SATA adapter cardSupports up to 4 SATA drives via a single M.2 slotAutomatic driver installation for common operating systemsIncludes 4 SATA cables for easy installationCompatible with Intel and AMD hardware platforms
M.2 to U.2 Host AdapterController Type: PCIeInternal Ports: 1x
IDE-SATA interfaceSupports SATA I/II/III drivesNo software requiredSupports optical drives
Adapter Card for U.2 NVMe SSDSupports U2 PCIe SSD (NVMe and AHCI)Compatible with PCIe 3.0 and Earlier VersionsEasy Setup with Native OS SupportDimensions: 2.1 cm x 6.3 cm x 1.5 cm
PCIe adapter for NVMe SSDHost interface: PCIe, output interface: SASFull-height / low-profile form factorDimensions: width 18 mm, depth 81 mm, height 44 mm
USB to RS422 / 485 Industrial Interface ConverterPort 1: USB B, Port 2: RS-422/485Cable length: 1.8 mWall-mountableSupports RS422/485 baud rate up to 921.6 kbit/s
StarTech.com PEXM2SAT32N1
Adapter cardM.2 SSD adapter card with 3 portsSupports 1 PCIe (NVMe) and 2 SATA III M.2 SSDsData transfer rates up to 40 Gbps for PCIe and 6 Gbps for SATAEasy installation in any computer with a PCIe slot
U.2 PCIe interfaceDimensions: W122 mm x H22 mm x L165 mmWeight: 65 g
Serial PCI Express RS232 adapter card with 4 portsBased on ASIX AX99100 with 16950 UARTSpeeds up to 921.6Kbps per portSupports Windows XP and above & LinuxIncludes low-profile and standard-profile brackets
PCI to PCIe InterfaceController Type: PCIeInterface Expansion: PCIInternal Ports: 1x
Adapter for M.2 NGFF SSD to 2.5-inch SATAConnections: SATA and M.2 SSDSupports SATA 6Gb/s data transfer rateDimensions: 7 cm x 10 cm x 0.7 cmWeight: 40 g
StarTech.com SAT32MSAT257
ControllerData Transfer Rate: 6 GbpsmSATA SSD to 2.5 inch SATA adapterDimensions: W7 cm x H0.7 cm x D10 cmWeight: 100 g
RAID ControllerController Type: PCIeInterface Expansion: S-ATA III (600 MB/s)Data Transfer Rate: 6 GbpsInternal Ports: 4x
StarTech.com PCIe SATA Controller (6P6G-PCIE-SATA-CARD)
PCIe SATA controller card with 6 portsSupports SATA III with 6 Gbps transfer speedCompatible with PCI Express 3.0 and port multiplierSupports popular operating systems such as Windows, macOS, and LinuxFulland low-profile bracket for flexible installation
M.2 to 2.5" SATA AdapterController Type: S-ATAInterface Expansion: S-ATA III (600 MB/s)Data Transfer Rate: 6 GbpsInternal Ports: 1x
Increase storage capacity: Support for two M.2 SATA SSDs via PCI ExpressBetter performance: SATA III (6 Gbit/s) speed, NCQ supportExtensive compatibility: Supports all standard M.2 NGFF drive sizesEnhanced productivity: Data recovery, backup drive, system performance boost
M.2 SATA Adapter for Raspberry PiConnection to M.2 NGFF SATA SSDSupports all Raspberry Pi models and other development boardsUSB 2.0 interface
Adapter enclosure for mSATA SSDDimensions: 100 x 70 x 8.1 mmCompatible with 2.5-inch SATA SSDsSupports full-length mSATA SSDs
Interface cardPCI Express interface cardConnection: 1 x PCI-e (plug), 1 x PCI (socket)Adapter type: PCIe x1 to PCICompatible with low profile adaptersEasy installation without additional drivers
Serial adapterMaterial: steelQuantity: 1Dimensions: Width 5.9 cm, Depth 11.7 cm, Height 2.2 cmPower supply: AC 120/230 V
PCI Express M.2 AdapterPCIe x4 3.0, compatible with 1.0 and 2.0Supports M.2 SSDs (NVMe and ACHI): 2242, 2260, 2280, and 22110