Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 40 of 59 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Focusrite Clarett OctoPre
Microphone/Line ExpansionChannels: 8Audio Analog Converter: 24 bitAudio Digital Converter: 192 kHz6-fold LED level indicatorsConnections: MicrophoneDimensions: W482 mm x H286 mm x D44.5 mmWeight: 4.15 kg
£685.41
Black Lion Audio Bluey
CompressorPolyester capacitorsAttack + Release continuously adjustableNumber of rotary controls: 5Enclosure Type: 19" (2 U)Rack-Mountable: YesConnections: XLR, Ethernet RJ45 (10/100 Mbit)Dimensions: W438 mm x H88 mm x D250 mmWeight: 8 kg
Behringer ADA 8200
PreamplifierEnclosure Type: 19" (1 U)Connections: 6.3 mm jack connector, ADAT Interface, Toslink, XLR
£222.34
ART T8
ART T8, 8-Channel Isolation TransformerCompletely passive designGround isolation of input and output signalInputs and outputs with XLR, 6.3mm jack, and RCA connectorsExtremely linear frequency response and wide frequency rangeUsable for signal tapping or as a splitterAll-metal housing, detachable rack mount brackets
£293.99
dbx 223xs
Active Crossover2-way stereo or 3-way monoMono sub outFactor setting: 10 xFormat: 19" / 1 U height unitConnections: XLRDimensions: W483 mm x H44 mm x D175 mmWeight: 1.7 kg
£168.23
ART DTI
Passive DI box2 channelsHum eliminatorFrequency response: 10 - 50,000 HzImpedance: 600 Ohm - 100 kOhmConnections: Audio input (6.3 mm), Audio input (RCA), Audio output (6.3 mm), Audio output (RCA), XLRDimensions: W89 mm x H107 mm x D44.5 mmWeight: 340 g
Klark Teknik 76-KT
CompressorNumber of Mono Channels: 1Enclosure Type: 19" (2 U)Connections: Audio input (6.3 mm), XLRWeight: 2.8 kg
£208.82
Behringer Powerplay P2
Headphone AmplifierStereo/mono source switchVolume controlBattery life: 12 hConnections: 3.5 mm jack connection, 6.3 mm jack connector, XLRDimensions: W38 mm x H33 mm x D132 mmWeight: 140 g
Mackie HM-400
Headphone AmplifierConnections: Audio input (RCA), Audio output (RCA), AUX input, HeadphonesDimensions: W483 mm x H46 mm x D224 mmWeight: 3.6 kg
Palmer DMS
Dynamic switch for microphone signalSwitching via footswitchSwitching between FOH and monitor mixing console possibleVarious sound settings for effects or reverbSwitching between two different rooms or zones1x XLR input, 2x XLR outputs
£49.95
Palmer Y-Box
Y-SplitterGround LiftNumber of Mono Channels: 1Connections: 6.3 mm jack connector
Palmer PRMMS
Microphone SplitterNumber of Mono Channels: 4Phantom Power: NoEnclosure Type: 19" (1 U)Rack-Mountable: YesConnections: XLR
Cranborne Audio 500ADAT
8-slot rack for 500 series modules in API formatIntegrated 8 In / 8 Out ADAT expanderDiscrete analog summing mixer with 8 channelsReference AD/DA converters with 121 dB(A) dynamic rangeC.A.S.T. system for analog signal transmission over CAT5XLR inputs and outputs as well as TRS inserts per moduleDimensions: 481 x 185 x 219 mm, weight 6.4 kg
Radial Engineering USB Pro
Stereo DI boxNumber of Stereo Channels: 1Audio Analogue Converter: 24 bitAudio Digital Converter: 96 kHzConnections: 3.5 mm jack connection, Headphones, USB-B, XLR
Palmer PRMLS
Line SplitterNumber of Mono Channels: 4Connections: XLR
dbx 266xs
CompressorConnections: 6.3 mm jack connector, XLRDimensions: W482.6 mm x H44.5 mm x D146 mmWeight: 2.19 kg
Radial Engineering JDI Stereo
Passive stereo DI box with high level handlingCompact format for easy handlingDelivers a super clear, distortion-free signalInput jack, jack thru, XLR out for versatile connectivitySwitchable -15 dB pad for optimal signal adjustmentGround lift function to prevent ground loops
Radial Engineering Pro-Iso
Stereo signal converter for balanced signals (XLR) to unbalanced signals (jack/RCA/3.5mm stereo jack)Switchable GND/Lift for optimal signal qualityAdjustable output level for individual customization2x XLR female in, 2x jack out, 2x RCA out, 1x 3.5mm stereo jack outRadial transformer for precise signal transmissionIdeal for use in music production or live performances
Presonus HP60
Headphone Amplifier150 mW per channelOutput controlNumber of Stereo Channels: 6Enclosure Type: 19" (1 U)Rack-Mountable: YesConnections: 6.3 mm jack connector, Audio input (6.3 mm), Audio output (6.3 mm), Headphones (6.3 mm), Microphone, XLR
Radial Engineering SB-48
Two-channel 48-volt phantom power generatorXLR female input and XLR male outputsSelectable 12-volt or 48-volt phantom powerLED indicator for operational status monitoringIntegrated cable clamp mechanism
Palmer wipper
Passive 1-channel DI box for guitar/bass/keyboard/synthesizerGalvanic isolation via transformer eliminates ground loopsLink output for passing on the input signalSecond jack input for summing input signalsDimensions: 50 x 140 x 68 mmWeight: 0.43 kg
£115.00
Tech 21 SansAmp Programmable Bass Driver DI
PreamplifierProgrammable preamp and overdrive pedal for electric bassAnalog sound generation with digital controlThree memory slots for direct access to soundsGain control, 2-band EQ, and presence controlBlend control for mixing the dry signalXLR output with switchable pad and phantom powerMetal housing, powered by 9V battery or power supply
BSS AR 133
DI boxOutputs galvanically isolatedGround lift switchableSwitchable -20/-40 dB padConnections: 6.3 mm jack connector, XLR
JB Systems XO 2.4
Crossover2-way stereo or 3-way mono crossoverFrequency range: 20 Hz - 20 kHzConnections: XLRDimensions: W483 mm x H44 mm x D136 mmWeight: 2.33 kg
ART BT-DI
Bluetooth direct box with external antennaTransformer-isolated XLR outputsHeadphone output with mono sumPhantom power or USB power supplyBluetooth 5.0 receiver with long rangeDimensions: 36 x 126 x 140 mm, weight: 910g
Arturia AudioFuse X8 IN
A/D converter with 8 analog line inputs24-bit AKM AD converter with up to 96 kHz sampling rateFront panel controls for channel selection and link functionDesktop design with robust 1U half-rack chassisConnections: 8x analog input, 1x Word Clock input, 2x ADAT optical outputsIncludes software download for various audio effectsDimensions: 221 x 216 x 48 mm, Weight 1.41 kg
Palmer PAN 04 A
2-channel DI box for unbalanced signalsTransformer-balanced, low-impedance signal at the outputsEliminates ground loop hum and interferenceActive circuit with unaffected frequency response and high dynamic rangeDirect outputs and -30 dB input attenuationMono output sums both channelsOperates with 9-24 V DC power adapters or phantom power
JB Systems ENH 2.3
Multi-Band Sound ProcessorIncreases bass pressureLow-cut filterSubwoofer phase inverterEnclosure Type: 19" (1 U)Connections: XLRDimensions: W482 mm x H44 mm x D154 mmWeight: 2.43 kg
Klark Teknik DI 22P
Passive stereo DI box for multimediaMIDAS transformers for sound qualityInputs: 2x 6.3 mm jack, 1x 3.5 mm mini jack, 2x RCANeutrik XLR outputs, pad switch, ground liftImpedance: input 30 kOhm, output 600 OhmFrequency response: 20 Hz 30 kHz, signal-to-noise ratio: 105 dBuCompact aluminum housing, protective corners, 118 x 64 x 112 mm, 0.53 kg
£77.15
Bugera PS1
Power Attenuator100 wattsConnections: Audio input (3.5 mm), Microphone, XLR
Radial Engineering ProMS2
Microphone splitterGalvanic isolationGround lift-30 dB padConnections: XLR
Radial Engineering SW8
8-channel line level auto switcher for redundant backupsSilent switching upon signal loss, manual or automatic8x XLR outputs, 2x 8x jack inputs, 1x 8-channel 25-pin D-Sub outputTransformer-isolated outputs to prevent interferenceSuitable for SMPTE or constant audio signals as trigger sourceDimensions: Height 4.5 cm, Length 44.5 cm, Width 15.25 cm
3 to 15 business days
Radial Engineering JDI Duplex
Passive stereo direct box with full featuresJensen transformers for exceptional audio performanceVarious input connector types (jack, RCA, XLR)180° phase reverse and -15dB pad per channelGround/lift switch to eliminate hum and buzz
Cloud Microphones Cloudlifter CL-Z
Microphone preamplifierVariable output levelHigh-pass filterPhantom powerConnections: XLR
£253.50
ART DUALXDirect
Dual DI BoxFrequency response: 10 Hz - 100 kHzDynamic range: 100 dBConnections: XLRDimensions: W99 mm x H47 mm x D117 mmWeight: 380 g
Radial Engineering PZ-DI
Active DI box for piezo pickups from orchestral instruments, acoustic guitar, acoustic bassAdjustable impedance for piezo and magnetic pickups3 switchable input impedances (1 Mega-Ohm, 10 Mega-Ohm for piezo transducers, 220 Ohm for magnetic pickups)Jack input/output, direct-thru, tuner and XLR outputSwitchable -15 dB pad, 180° phase, ground liftContinuously adjustable low-cut filter, switchable 3 kHz low-pass filter48 V phantom power, metal housing
Palmer PMS02
Microphone splitter for distributing the signal to multiple inputsSuitable for FOH mixer, monitor mixer, and OB vanGenerously sized low-frequency transformers for unaffected soundPrevents ground loop humCan convert unbalanced to balanced signalsAluminum die-cast housing, 2 channels, 1 input XLR/f, 2 outputs XLR/mNominal level: 0 dB, maximum level: +20 dBDimensions: 115 x 48 x 140 mm, weight: 0.67 kg
IMG StageLine LS-280/SW
Signal splitterInputs: 2Outputs: 8Enclosure Type: 19" (1 U)Rack-Mountable: YesConnections: XLRDimensions: W482 mm x H48 mm x D205 mmWeight: 2.3 kg
£198.19
Arturia AudioFuse X8 OUT
D/A converter with 8 analog DC-coupled line outputs24-bit Cirrus Logic DA converter with up to 96 kHz sample rateFront control with access to sync functionConnections: 8x analog output, 1x Word Clock input, 2x ADAT optical inputIncludes power supply and mounting kit for two unitsDimensions: 221 x 216 x 48 mm, weight 1.37 kg
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
0Seller
0Buy Signal Processors Cheaply: Consumer Tips
A signal processor is an indispensable device in the world of audio production, used to modify and enhance audio signals. This electronic tool can perform a wide range of functions, from simple tasks like volume adjustments to complex effects such as echo and distortion. The technology behind signal processors has significantly evolved over the years, leading to a variety of formats that include digital, analogue, and software-based solutions.
Types of Signal Processors
- Dynamic Processors: These include compressors, limiters, gates, and expanders. They regulate the dynamics of an audio signal to ensure a balanced sound.
- Frequency Processors: This category includes equalizers and filters that adjust frequency balance and attenuate or emphasise unwanted frequencies.
- Time-Based Processors: Reverb and delay are the most common time-based effects that add depth and space to audio material.
- Modulation Processors: Flangers, phasers, and choruses bring movement and variation to the signal and are often used to expand timbres.
The Integration of Signal Processors in Audio Setups
Signal processors can be used in various environments, from live performances to studio recordings. In live events, they ensure clear sound transmission, while in studio recordings, they fine-tune the final mix. The selection and configuration of signal processors depend on the specific requirements of the project and the artist.
Development and Innovation in Signal Processing
With the advent of digital technology, signal processors have evolved tremendously. Digital models today offer exceptional precision and flexibility, capable of executing complex algorithms that were previously unimaginable. The software versions of these processors are particularly attractive to many users due to their portability, easier updates, and integration into digital audio workstations.
The Most Well-Known Brands and Products in Signal Processing
Manufacturers such as Behringer, Lexicon, and Universal Audio are renowned for their high-quality signal processors, available in both hardware and software formats. These products are the foundation for creating professional audio quality across various industries.
Accessories and Add-Ons for Signal Processors
To get the most out of a signal processor, additional components can be significant. These include audio interfaces, controllers for remote operation of the processors, and specialised software plugins that offer extra features. The right combination of hardware and software allows for comprehensive control over audio processing and can be crucial for the quality of the final product.
Published by the editorial team at PriceMachine.co.uk
