Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 28 of 28 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
KS Tools Steel Support Stand 6 t (160.0371)
Jack standLoad Capacity: Up to 6,000 kgHeight Adjustable: YesFoldable: NoMaterial: SteelQuick adjustmentDimensions: H580 mm
KS Tools 515.1210 Pneumatic Impact Wrench
Pneumatic Impact WrenchIdle speed: 7,930 rpmTorque: 542 NmDrill Spindle Thread: 1/4"Right/Left Rotation: YesDimensions: W195 mm x H200 mmWeight: 2.15 kg
£146.99
KS Tools Automatic Digital Multimeter (150.1765)
Multimeter with automatic detection of AC voltage, DC voltage, and resistanceNon-contact inductive voltage testingLarge 3.5-inch color LCD displayTest lead set with red and black test probesIncludes 700 mAh lithium-ion battery and rugged protective caseFunctions: DC and AC voltage measurement, resistance measurement, capacitance measurement, frequency measurement, diode testingDimensions: Height 20 cm, Length 10 cm, Width 5 cm
KS Tools MiniMonster (515.1150)
Cordless Screwdriver Type: Pneumatic Impact WrenchWeight: 1.08 kgOperation type: pneumaticOperating pressure: max. 6.3 barMax. bolt size: M16Min. hose diameter: 3/8'' 10 mmWidth: 90 mmOverall length: 185 mm
KS Tools Digital torque adapter (516.1194)
Digital torque adapter with 1/2-inch driveMeasuring range from 68-340 NmTorque accuracy: clockwise ±3% and counterclockwise ±4%LED display and acoustic signal when the torque is reachedSuitable for mechanical engineering, automotive workshops, and locksmithsWeight 242 g, dimensions diameter 85 mm
KS Tools Pneumatic chisel hammer (515.3881)
Pneumatic Chipping HammerExhaust directed downward through the handleErgonomic design for versatile useVariable impact rate adjustment up to 2200 blows/minMaximum operating pressure 6.3 bar and air consumption 114 l/minDimensions: Overall length 292 mm, chisel chuck 10.2 mm
KS Tools Spirit level with pipe leveling 60 cm (204.7060)
Aluminum rectangular profile for pipe levelingProfiled measuring surface for precise measurementsLightweight profile for easy handlingTwo hand grips for better handlingShock-absorbing end caps for increased durabilityFlat milled measuring surface for exact resultsDimensions: Length 600 mm
KS Tools Measuring tape with crank 20 m (300.0049)
Measuring TapePolyamide-coated steel tapeRange: 20 mDimensions: W13 mm
KS Tools Hot Air Device Set (960.1190)
Stepless temperature controlControl dial with marking for 6 temperature rangesIncludes 4 different nozzle attachmentsWeight: 1.11 kgWidth: 80 mm, Height: 210 mm, Total length: 260 mmPower: 2000 W, Voltage: 220 240 V (50 Hz), Operating current: 8000 mA, Airflow: 500 l/min
£56.66
KS Tools Electronic Workshop Torque Tester 5 - 500 Nm (516.0100)
Torque testing deviceFor the inspection and adjustment of torque wrenches and torque screwdriversControlled clockwise and counterclockwise tightening testIntegrated torque sensorBuckling point detectionMeasurement range Nm: 5 - 500Accuracy: +/-1%Display: Yes
KS Tools SlimPOWER Mini Pneumatic Straight Die Grinder (515.5530)
Pneumatic Air Pen Grinder with 1/4" Coupling PlugErgonomic Balanced Design for One-Handed OperationVibration-Damped and Non-Slip Soft-Grip HandleSuitable for Hard-to-Access Areas and Confined SpacesExhaust Air Directed Through the HandleIncludes Carbide Cutter, Mini Cutting Discs, and Stone Grinding Attachments with 6 mm Shank
KS Tools Digital caliper 0-150 mm (300.0532)
Digital caliper with large LCD displayZero setting and selectable measurement unit (mm or inch)Suitable for internal, external, and depth measurementsLocking wheel allows permanent retention of the measurementMade of stainless and hardened steelLength: 150 mmMeasuring range: 0 150 mm, resolution: 0.01 mm, accuracy: +/0.03 mm
£30.94
KS Tools multimeter with test probes and crocodile clips (150.1480)
Multimeter specifically designed for automotive and commercial vehicle electrical systems and electronicsDual LCD display with digital readout and bar graphAutomatic overload and polarity indicatorSafety mechanism for V, µA / mA / A11-position rotary switch with automatic range selectionLarge LCD display with backlightBuilt-in glass fuse to protect circuitsIncludes dual test lead set with test probes and alligator clips
£98.99
KS Tools SlimPOWER (515.5580)
Pneumatic sanding machinePower of 220 wattsNo-load speed of 19,000 rpmExhaust directed through the handle for one-handed operationSuitable for hard-to-reach areas and confined spacesStepless speed controlDimensions: total length 120 mm, width 70 mm, weight 300 g
£225.13
KS Tools Digital spirit level (300.0208)
LCD backlightAutomatic leveling for overhead workMeasurement units: °, %, mm/m, in, ftWith hold function for measured valuesMaterial: plastic housing with aluminum frame
KS Tools superMONSTER (515.3260)
Pneumatic impact wrench with 3/4-inch square driveMax. loosening torque of 3405 N·mNo-load speed of 6200 rpmAir consumption of 283 l/minNoise level of 115.5 dB(A)Weight of 7.76 kgDimensions: Length 504 mm, Width 230 mm
KS Tools Pneumatic Angle Impact Wrench (515.1625)
Cordless Screwdriver Type: Impact WrenchHigh-performance pneumatic angle impact wrench with 271 NmSquare drive according to DIN 3120 / ISO 1174 with ball detent2-step torque preselection and switch for forward / reverse operationHigh-performance twin-hammer impact mechanism for high efficiencyCold-insulated handle and vibration-dampedOperating pressure max. 6.3 bar, no-load speed 4150 rpm
KS Tools Torx bit set 5 pcs (911.3500)
Torx with ball end for manual operation and electric screwdriverDrive type: external hexagonal driveTorx profile size: T40Material: S2 special steelSurface: nickel-platedContents: 5 piecesOverall length: 25 mm
KS Tools Xtremelight Mini (515.3830)
Impact wrenchHigh-performance pin hammer mechanism for efficient workAir connection swivels 150°
KS Tools MiniMonster Xtremelight (515.3855)
Cordless Screwdriver Type: Pneumatic Impact WrenchHigh-Performance Pneumatic Impact WrenchMax. Breakaway Torque: 1390 NmNon-Slip Soft-Grip HandleOne-Hand Direction Lever (Left / Right)3-Stage Torque AdjustmentWeight: 1.08 kgOperating Pressure: Max. 6.3 bar
KS Tools SlimPOWER (515.5525)
Drill Type: Angle drillAngled design for one-handed operationRatchet chuck with clamping range 1 6.5 mmStepless speed controlVibration-damped through double bearing guideSuitable for hard-to-reach areasOverall length 145 mm, width 90 mm, weight 700 g
KS Tools Pneumatic Polisher (515.3063)
PolisherSide HandleTwo-Hand Operation PossibleStepless Speed ControlIncludes 1/4“ Clutch Connector
KS Tools Pneumatic Straight Drill (515.5435)
Rotary Hammer DrillOne-Hand Operation with Ergonomic DesignQuick-Change Chuck Capacity up to 10 mmIdeal for Bodywork and Industrial UseStepless Speed ControlCold-Insulated Handle for Vibration-Damped Operation
KS Tools superMONSTER (515.3270)
Cordless Screwdriver Type: Pneumatic Impact WrenchPneumatic Impact Wrench with 3/4 Inch Square Drive4-Step Torque Selection: 919, 1523, 2145, 3064 NmHigh-Performance Twin Hammer Mechanism for Efficient OperationNon-Slip Soft-Grip Handle for Secure GripLow Vibration and Reduced Noise LevelDimensions: Length 350 mm, Width 230 mm, Weight 6.75 kg
KS Tools Pneumatic eraser machine (515.5445)
Pneumatic engraving machineSpeed of 4,000 rpmErgonomic design for one-handed operationStepless speed control via adjustment screwIdeal for removing stickers and adhesive residuesVibration-damped for comfortable workingCold-insulated handle for better grip
KS Tools Gas soldering iron with piezo ignition (960.1161)
Gas soldering ironTemperature Range: 1,300 °CPiezo ignitionWeight: 80 g
source: Amazon
KS Tools SlimPOWER 1/4" (515.5505)
Ratchet wrenchOperating mode: pneumaticMax. operating pressure: 6.3 bar (90 psi)Dimensions: width 35.5 mm, length 135 mmPower: 186 WAir consumption: 240 l/minSquare drive 1/4'' according to DIN 3120 / ISO 1174Ratchet head switch lever
£61.70
source: Amazon
KS Tools SlimPOWER (515.5510)
Cordless Screwdriver Type: Ratchet screwdriverPneumatic tool with a power of 186 WMaximum operating pressure of 6.3 barAir consumption of 240 l/minNo-load speed of 300 rpmSquare drive according to DIN 3120 / ISO 1174Sound power level of 98.1 dB(A)Dimensions: Width 35.5 mm, Overall length 135 mm
£104.43
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
