Vision TM-TELE

- Universal projector ceiling mount with telescopic pole - Overall length 440-735 mm - Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottom The TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for flush-mounting the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended. One-Man Installation Thoughtful design detail include a length adjustment clamp system which requires only one hand. Sloping Ceilings A tilting mechanism is included which tilts to a full 90 degrees allowing you to use the bracket as a boom if need be. Safety Approved A back-up fall-arrest tether is included which secures the projector to your bracket and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009). Easy fit Projectors have threaded inserts in the bottom for attachment but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the spider arms on our bracket over the attachment holes and insert a screw into the projector. Obstruction-free Cable Management Visions unique chute-through system leaves cable access clear even for big VGA connectors. Tools Included A spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation. Secure Quick-release mechanisms make life easier for thieves so the TM-TELE is secure and features security bolts.

- Universal projector ceiling mount with telescopic pole- Overall length 440-735 mm- Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottomThe TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for “flush-mounting” the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended.One-Man InstallationThoughtful design detail include a length adjustment clamp system which requires only one hand.Sloping CeilingsA tilting mechanism is included which tilts to a full 90 degrees. allowing you to use the bracket as a boom if need be.Safety ApprovedA back-up fall-arrest tether is included which secures the projector to your bracket. and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009).Easy fitProjectors have threaded inserts in the bottom for attachment – but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the “spider” arms on our bracket over the attachment holes. and insert a screw into the projector.Obstruction-free Cable ManagementVision’s unique ‘chute-through’ system leaves cable access clear – even for big VGA connectors.Tools IncludedA spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation.SecureQuick-release mechanisms make life easier for thieves. so the TM-TELE is secure and features security bolts.