Sorry, nothing was found. Please change your selection and try again.
Showing 121 - 160 of 1,769 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
KS Tools 670.0241 Stud Extractor, Ø 5-20 mm
Stud extractor made of tool steelDrive side with external hex profile (19mm wrench size)Diameter from 5mm to 20mmTorque up to 120NmWeight: 400gSuitable for removing and installing studsRight / left clamping functionAlso suitable for oversized studs
KS TOOLS 14x18mm Torque Tool Set with Insert Tools, 31-Piece (516.1730)
Universal wrench set with torque wrench, open-end wrench set, and ring spanner setTorque adjustable from 40-200 Nm via scaleQuick-lock plug connection for 14x18 mm insert toolsDelivered in sturdy plastic case for secure storage and transportVersatile use for nearly any screwing task
KS Tools 115.8500 Water Pump Pliers, 61.5 mm
Water pump pliers made of finest chrome vanadium steelShape: 7-step groove jawWeight: 0.51 kgWidth: 65 mmTotal length: 300 mm (12'')Max. jaw opening: 61.5 mmWith precise push-button adjustment on the jaw and safety locking mechanism
KS TOOLS Screw-in adapter AG UN: 1.1/2" x internal thread: M16 x 2.0
Adapter from KS ToolsWeight: 0.72 kgOverall length: 90 mmMaterial: Chrome Vanadium SteelImage caption: F
KS Tools 911.5020 10 mm Classic Bit Set, 15-piece, TX
15-piece bit set for Torx screws with 10 mm external hexagonSuitable for manual operation, electric screwdrivers, and impact driversIncludes 1/2" socket adapter for 10 mm bitsReinforced design for fastening tasks in crafts and industryPrecise selection of the most common 10 mm Torx bitsMade of sandblasted special tool steel
£42.36
source: Amazon
KS Tools 918.1385 1/2 inch Chrome Plus Bit Socket Set for TX Screws, 9-piece, T20-T60
9-piece Torx Bit Socket SetProfile: TORXOverall length: 55 mmMaterial: Chrome vanadium steel, high-gloss chrome-platedSquare drive inch: 1/2''Standard: DIN 3120 / ISO 1174
£43.45
source: Amazon
KS Tools 117.1689 Insulated T-handle Hex Key, 10 x 250 mm
KS Tools T-Handle Internal Hex Pin WrenchInsulated for immersion according to IEC 60900Solid construction, blackened finishChrome vanadium materialDimensions: length 250 mm, wrench size 10Weight: 420 g1000V test mark
£30.79
KS TOOLS 1/4" Glow Plug Vibration Screwdriver Set, 5-piece (152.1060)
5-piece Glow Plug Pneumatic Vibration Screwdriver SetIdeal for gently loosening stuck glow plugsControlled vibration impulse frees corrosion and carbon depositsCompatible with all common glow plugsRelease torque adjustable in 4 levelsPrevents costly repairs caused by broken-off glow plugsIncludes 1/4'' coupling connector and sturdy steel sheet case
source: Amazon
KS TOOLS Hydraulic Nut Splitter Set, 7-piece (700.1170)
Hydraulic Nut Splitter Set with 7 PiecesSuitable for Car and Motorcycle RepairsAllows Easy Loosening of Seized NutsSimple Handling Thanks to Hydraulic AssistanceIdeal for Workshops and DIY EnthusiastsMaterial: Steel
£279.94
KS Tools 116.2032 Angle Valve Screw-in Aid
Angle Valve Threading Aid by KS ToolsWeight: 0.143 kgMaterial: Special Tool Steel
KS-Tools 116.2086 1/2" Hex Socket Screwdriver, M8
Stud driver with 1/2" square driveSpecial adapter for damage-free installation and removal of studsSpecial tool steel
KS TOOLS 1" Hexagon Torsion Torque Socket, extra long, 24mmx350Nm (515.1461)
Power/impact socket for wheel bolts and nutsInternal square per DIN 3121 / ISO 1174Extra long design for machine operationPhosphated chrome-molybdenum materialWeight: 1.38 kgWrench size: 24 mmOverall length: 300 mm
KS TOOLS Universal Slide Hammer heavy 6+3 kg Thread: M20 x 1.5
Universal sliding hammer weighing 12 kgEnormous impact force of up to 11 tonsImpact weight of 6 kg including 3 kg additional weightThread connection M20x1.5Extra heavy and robust design for cars and trucksMaterial: special tool steelOverall length: 850 mm
KS Tools 911.1480 1/4 inch Classic Torx Security Bit Set with Hole, 8-piece, TS10-TS40
Construction made of alloy steel for strength and precise torque lengthInterchangeable heads for complete head replacement8-piece 1/4" bit set for Torx screwsSuitable for assembly and disassembly of locking screws on temperature sensors and mass air flow sensorsFace hole drilling for easy handling
KS Tools 330.4071 HSS TiN Twist Drill, 7.1 mm, pack of 10
HSS TiN twist drill bit, 10-pack, diameter 7.1 mmDIN 338 Type N, right-hand cuttingTapered body grind as point grind, cross grind as tip sharpening130° point angle, 20 30° helix angleHigh-performance steel with TiN-coated surfaceIdeal for use in steel, alloyed and unalloyed cast steel up to 900 N/mm² tensile strength, bronze, brass, short-chip aluminum alloys, graphite, nickel silver, sintered iron, grey, malleable, nodular, and die casting
KS-Tools 670.0092 Separation Pry Bar, 23mm
Special tool steelFor quickly loosening track and tie rod ends, steering arms, and other control componentsIdeally suited for confined spacesWeight: 0.9 kgOverall length: 330 mmJaw width: 23 mmWarning: The separating and assembly fork damages the dust boot
KS Tools 516.1414 3/8 inch T-handle drive square
Ergonomic T-handle for a secure, non-slip gripSquare drive according to DIN 3120 ISO 1174 with ball lockingWeight: 0.051 kg, Width: 83 mm, Overall length: 72 mmSquare drive inch: 3/8'', Square socket inch: 3/8''Standard: DIN 3120 / ISO 1174, Handle: T-handle
KS Tools 330.6067 HSS-G Co 5 Short Twist Drill, 6.7 mm, Pack of 10
10 pieces with a weight of 0.14 kgDiameter of 6.7 mm and overall length of 70 mmClamp length of 39 mm and partial length L2 of 31 mmMaterial: High-performance steel with gold-brown surfaceStandard: DIN 1412 C / DIN 1897 Type NCutting direction: right, cutting material: HSS-G Co 5Application area: steel, cast steel, malleable cast ironIdeal for strengths up to approx. 1100 N/mm², rustand acid-resistant steels, V2a, V4a, gray and malleable cast iron
KS Tools 330.7058 HSS-G Twist Drill, 5.8 mm, pack of 10
DIN 340 Type N right-cuttingConical shank grind as pointed grind118° point angle, 20-30° helix angleHigh concentricity, polished surfaceHigh-performance steelIdeal for steel, cast steel up to approx. 900 N/mm² tensile strength, bronze, brass, short-chipping aluminum alloys, graphite, nickel silver, sintered iron, gray, malleable, spheroidal, and die castContents: 10 pieces, weight: 0.21 kg
KS Tools 550.1026 Flexible Magnetic Holder, L-510 mm, ØHead-17 mm
Flexible shaft with 2-component gripSpecial tool steelWeight: 0.2 kgLength: 510 mmHead diameter: 17 mmLoad capacity: 2 kgMaterial: Special tool steel
£23.96
KS TOOLS plastic wedge set, 5-piece
5-piece plastic wedge setIdeal for removing various trim partsPaint-friendly and damage-freeSuitable for delicate work on fragile trim parts
KS TOOLS ERGOTORQUE WOODmax impact screwdriver set, 6-piece, PH + slotted (300.1050)
6-piece impact screwdriver setIncludes hex drive for wrenchProtective impact cap at handle endOptimal torque transmissionErgonomically shaped, sealed beech wood handleHardened chrome-plated blade with blackened tipChrome vanadium blade
source: Amazon
KS TOOLS 3/8" Hex Socket Wrench Set, 10 pcs, 10-19mm (913.3800)
3/8'' Insert Wrench Set, Hexagon, 10 pcs.Material: Finest Chrome Vanadium Steel, matte satin chrome-platedWeight: 0.63 kgProfile: HexagonSquare Drive Imperial: 3/8''Features: Hexagonal, with internal square drive, for manual operation, matte satin finish, Chrome Vanadium
£41.26
KS Tools 330.6061 HSS-G Co 5 Short Twist Drill, 6.1 mm, Pack of 10
10-piece hand-operated power sourceDIN 1897 Type N right-cutting conical mantle grind from 3 mmCross grind according to DIN 1412 C, 135° point angle, 20-30° helix angleGolden brown surface, high-performance steelIdeal for steel, cast steel, up to approx. 1100 N/mm² tensile strengthRustand acid-resistant steels, V2a, V4a, gray cast iron, and malleable cast iron
KS Tools 330.3104 HSS-G Co 5 Twist Drill, 10.4 mm, pack of 5
DIN 338 Type N right-hand cuttingTapered body grind as pointed tip grindCross grind as finishing point130° point angleMaterial: cobalt-alloyed high-performance steelContents: 5 piecesDiameter: 10.4 mmOverall length: 133 mm
KS Tools 150.1570 Feeler Gauge, 3-piece
Ks Tools Feeler Gauge Set, 3 pcs (150.1570)Feeler gauge set with 3 piecesGap height: 45 mm, length: 110 mm, disc diameter: 30 mmEffective length: 45 mm, effective width: 15 mm, blade thickness from: 1 mm10 blades for precise gap measurementNo damage or scratching on already painted partsWith suction mount and flexible gooseneckMaterial: plastic, weight: 100 g
KS Tools 140.2331 Windshield Removal Tool with 2 Suction Cups and Wire Drive
Disc extraction tool with 2 suction cupsWeight: 5200 g
KS Tools 330.3071 HSS-G Co 5 Twist Drill, 7.1 mm, Pack of 10
Spiral drill bits made of HSS-G Co 5Diameter of 7.1 mmPack of 10DIN 338 Type NRight-cutting with tapered mantle grind as tip grind and cross grinding as point thinningSuitable for unalloyed and alloyed steels up to 1100 N/mm² tensile strength, quenched and tempered steels, case-hardened steels, stainless and acid-resistant steels as well as hotand cold-work tool steelsGold-brown surface, high hot hardness resistance due to cobalt-alloyed high-performance steel
KS Tools 330.4105 HSS TiN Twist Drill, 10.5 mm, pack of 5
HSS TiN Twist Drill, 5-piece pack, diameter 10.5 mmDIN 338 Type N, right-hand cuttingConical body grind as point grindCross grind as tip sharpening130° point angle, 20-30° helix angleIdeal for use in steel, alloyed and unalloyed cast steel up to 900 N/mm² strength, bronze, brass, short-chipping aluminum alloys, graphite, nickel silver, sintered iron, gray, malleable, chip, and die casting
KS Tools 330.7057 HSS-G Twist Drill, 5.7 mm, Pack of 10
Long spiral drill bit, 5.7 mm, pack of 10DIN 340 Type N, right-hand cuttingPoint grind with 118° point angleHigh-performance steel, polished surfaceOverall length: 139 mm, flute length: 48 mmApplication area: wood, plastic, metalStandard: DIN 340 Type N, cutting direction: right
KS Tools 331.0675 Tool Holder with Fine-Toothed Reversible Ratchet Head, 300 mm
Tool holder with reversible ratchet head, 320mmAdjustable for left, right, and fixed settingsTwo-jaw chuck with sliding cross handleIdeal for thread cutting in hard-to-reach areasHigh-gloss chrome platedSpecial tool steelOverall length: 320mm
ks tools dead blow hammer, head weight g: 590
Steel tube handle and plastic gripRecoil-free thanks to steel shot in the head cavityUp to 100% higher impact compared to regular soft-face hammersSplinter-proof and wear-resistantReplaceable polyamide headsFor ergonomic, health-friendly workOverall length: 295 mm, hammer head weight: 590 g
KS Tools 516.4895 14 x 18 mm Ergotorque Plus Universal Wrench without Torque Function
Universal insertion wrench for 14x18 mm socketSuitable for all insertion toolsFor loosening tight screw connections in industrial sectorsUnlimited loosening torque without torque functionErgonomic 2-component handle with soft zoneLarge range of professional tools and workshop equipment
KS Tools 577.0399 Classic Adjustable Wrench Set, 3-piece
Adjustable wrench set, 3-pieceWeight: 2.8 kgMax. jaw width: 43 mmMin. jaw width: 28 mmMaterial: chrome vanadium steel, matte satin chrome finish
KS TOOLS Test and Measurement Accessory Set, 15-piece (150.1675)
Ideal for brake bleeding fittingsAngled and offset ringsFor brake bleeding without wheel removalCompatible with test lamps and multimetersFor daily use in diagnostics and fault findingUsable up to a maximum of 24V (10A)
KS Tools 330.7055 HSS-G Twist Drill, 5.5 mm, pack of 10
10 pieces HSS-G twist drills, diameter 5.5 mmDIN 340 type N, right-hand cuttingConical body grind as point grind, 118° point angleHigh runout accuracy, polished surfaceHigh-performance steel, ideal for various materialsSuitable for steel, cast steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, tempered, spheroidal, and die castLength: 139 mm, flute length: 48 mm, partial length L2: 91 mm
KS Tools 330.7063 HSS-G Twist Drill, 6.3 mm, pack of 10
Right-hand cutting conical flute with 118° point anglePolished surface, high run-out accuracyDIN 340 Type NHigh-performance steelSuitable for steel, cast steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, malleable, spheroidal, and pressure castingsHSS-G twist drill, long, pack of 10, diameter 6.3 mmIdeal for tensile strengths up to approx. 900 N/mm²
KS Tools 142.5166 Sledgehammer with Fiberglass Handle, 1250 g
Sledgehammer with steel tube handle and plastic gripWeight: 1.425 kg, hammerhead: 1,250 gOverall length: 260 mm, striking face width: 43 mmMaterial: tool steelDIN 6475 standardInductively hardened striking face edge zonesFace ground smooth, rounded edgesHead coating with textured powder-baked enamel
KS Tools 700.1400-3 Puller Arm Set, 5-piece
Puller Arm Set, 5-pieceHand-operatedIdeal for puller devicesVersatile applicationEasy to use
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
