Sorry, nothing was found. Please change your selection and try again.
Showing 81 - 120 of 2,804 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
source: Amazon
KS TOOLS Brass Drift Pin, 300mm (156.0415)
Tool for driving out bearings, bolts, bushings, etc.Material: brass/aluminumWeight: 1.13 kgLength: 300 mmDiameter: 20 mm
£45.00
source: Amazon
KS Tools 550.1045 Hook Tool Set, 4-piece
Weight: 0.12 kgSet pieces: 4-pieceMaterial: Special tool steelHandle: single-component handleAccessories: with 60 mm bladeFeatures: ideal for removing and inserting O-rings and seals, two-component handle, special tool steelSet includes: hook tool, straight (550.1046), hook tool, 45° bent (550.1047), hook tool, 90° bent (550.1048), hook tool, 135° curved (550.1049)
£11.71
KS Tools 913.1468 1/2 inch Spiral Profile Socket, 13 mm
Weight: 0.05 kgProfile: Spiral grooveDiameter: 22 mmOverall length: 34 mmProfile size: 13 mmMaterial: Finest chrome molybdenum steelSurface: phosphatedSquare drive inch: 1/2''Standard: DIN 3120 / ISO 1174
KS Tools 111.3525 Steel One-Hand Pipe Wrench, 600 mm
Continuously adjustable steel one-hand pipe wrenchHead ground and drop forgedClamping range up to 76 mmWidth: 95 mm, weight: 3000 gMetal handle, length: 600 mm
KS Tools 150.2125 1/2 inch Lambda sensor socket, slotted, square, 22 mm
6-sided special socket for mounting and dismounting hard-to-reach lambda sensorsTime-saving work even on hard-to-reach lambda sensorsPrevents dismounting and mounting of the protective shieldUniversally applicable and highly durableInternal square drive according to DIN 3120 / ISO 1174 with ball retention grooveWeight: 0.17 kg | Profile: 6-sided | Overall length: 48 mm | Profile size: 22 mm | Drive inch: 1/2'' | Standard: DIN 3120 / ISO 1174
KS Tools 117.1333 1/2 Inch Insulated Socket, Long, 8 mm
6-sided in accordance with DIN 7448Insulated according to IEC 60900Internal square drive according to DIN 3120 / ISO 1174 with ball catch grooveChrome vanadiumDiameter D1: 26.0Weight: 105Diameter D2: 19.0
KS TOOLS Open-End Impact Wrench 90mm DIN 133, Chrome Vanadium, Phosphated
Tube wrench, metric, 90 mmDIN 133, jaw angle 15° bentWith impact edge for especially heavy-duty assembliesPhosphated chrome-vanadium material
KS TOOLS Labyrinth Screwdriver Set, 6-piece (150.9390)
Special wrench set for conical oil drain screwsExternal hex size: 21 mmPrecisely fitting profile for professional operationMaterial: Finest chrome vanadium steel, matte satin chrome-platedWeight: 0.8 kgPieces in set: 6 pcs.
KS Tools 333.0058 HSS Hexagon Thread Cutting Nut MF, M21 x 1.5
Hexagon lock nut MF, M21x1.5Material: steel, non-ferrous metalDiameter: 41 mmHead height: 14 mmWeight: 0.112 kgSurface: plain, silverStandard: DIN 382 / ISO 6gApplication area: non-ferrous metals, steel
KS TOOLS Standard Two-Hand Bender, Ø 6mm (122.1006)
Precise two-handed bending up to 180°Suitable for soft copper, aluminum, brass, and mild steel pipesFatigue-free work thanks to lightweight designStandard two-handed benderDiameter: 6mm
KS Tools 117.1160 Ergotorque VDE Pliers Set, 4-piece
Pliers set with 4 piecesMaterial: special tool steelSurface: matte chrome-platedStandard: IEC 60900Test certificate: 1000 Volt GSInsulation: protective insulation according to DIN EN 60900Set consisting of combination pliers and wire strippers
ks tools Basic universal puller 2-arm, 10-120mm, 620.4302
Universal puller made of special tool steel2-arm, suitable for diameters from 10-120 mmWeight: 2.513 lbMaterial: special tool steel
KS TOOLS ERGOTORQUEplus T-handle TX pin spanner set with bore, 8-piece, TB9-TB40
Torx L-key set with through-hole8-piece set with T-handleMade of finest chrome vanadium steel, matte satin chrome-platedFully hardened and blackened tipTorx sizes: TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40Hole at the short end, 2-component handle
£31.93
KS TOOLS Hex Ball Head Set 10 pcs XL Version 3-4-5-6-7-8-10-12-14-17mm
Extra-long version DIN ISO 2936Ball end on the long side for hard-to-reach screwsFully hardened, matte chrome-platedMaterial: special tool steelWeight: 2.38 kgPieces in set: 10 pcs.
KS Tools 670.0075 Klemm screw extractor set, 2-piece with hydraulic spindle
Clamp Screw Puller with Hydraulic SpindleFor loosening tightly seated clamp screws (M10) on 4-link axlesFor right and left control arm clamp screwsFor aluminum and steel four-link axlesRelease force up to max. 12 tUniversally applicable hydraulic spindle (mounting thread 1.1/2"x16TPI)Fine adjustment for optimal efficiencyIn sturdy plastic case
KS TOOLS Spade Bit, Ø 35mm, 16mm Spiral (900.2170)
Drill tool for greasy or sludge-clogged pipesDrill chuck made of hardened spring steelSuitable for 16.0 mm diameter spiral cableOperating range from 50.0 to 75.0 mmWeight: 50 gDiameter: 35.0 mmHand-operated
KS TOOLS 3/8" Twelve-Point Power Socket Set, short, 10-piece, 8-17mm (515.0950)
3/8" 12-point power socket set, short, 10-piece12-point internal square drive according to DIN 3121 / ISO 1174Short version for machine operationPhosphatedSuitable for DIY enthusiasts and professionalsIdeal for wrench and other applications
£35.55
KS TOOLS lfilter chain wrench 165 mm extra heavy duty with double chain
One-handed operation, continuously adjustableHandle adjustable up to 90° angleSecure grip thanks to additional groovesDip-insulated handleMaterial: Plastic, chrome vanadium steelDiameter: 160 mm
£53.49
KS Tools 911.0708 KS Tools Superlock Socket Set 1/4"+1/2"; 108-piece
6-point FlankTraction profile made of chrome-vanadiumMatte satin finishDurable plastic case108-piece socket wrench set1/4" + 1/2" socket wrench set8° back swing angle45 teethQuick-release function
KS TOOLS Ultrasonic Leak Detector for Bodywork Leaks
Ultrasonic Leak Detector for Bodywork LeaksAcoustic Localization of LeaksReceiver is guided along the outer skin of the bodyworkFacilitates root cause analysis of wind noise or water ingressWeight: 0.46 kg
KS Tools 914.0031 Vise without Swivel Base, 125 mm
Bench vice without rotary baseJaw length: 120 mmWith pipe clamping jawLength: 360 mmMaterial: special tool steelWith adjusting screw and pipe clamping jawForged connection of rear and front jawJaws shaped extra high for large clamping depthsDouble-trapezoidal spindle for quick opening and closingInductively hardened jaws and anvil plate
KS Tools 515.3551 Sanding belt for belt sander, grit 80, pack of 10
Sanding belts for pneumatic belt sander 515.3549Contents: 10 piecesWeight: 0.06 kgTotal length: 330 mmGrit: 80Features: Sanding belts for pneumatic belt sander 515.3549Replaceable heads made from a single piece of steel alloy
KS TOOLS VDE Open-End Wrench, 30mm DIN 7446, Chrome Vanadium, Forged
Open-end wrench with protective insulation, metric, 30 mmAccording to DIN 7446Dip insulation according to IEC 60900Open-end angle 15° bentMaterial: chrome vanadiumWidth: 69.8 mmLength: 230 mm
KS TOOLS 1/2" Socket Set 24-Piece 6-Point Sockets / 2K-45Z Ratchet
Socket wrench set with 24 piecesMaterial: chrome vanadium steel, matte satin chrome-platedSquare drive inch: 1/2''Switching ratchet with 45 teeth and 8° return angleIncludes various socket wrench inserts, extensions, and accessories
KS Tools 965.0510 Titan Plus Angle Pin Wrench for Hex Socket Screws, 1/4 Inch
Hex key with 6-sided profile according to DIN ISO 2936100% non-magnetic and lightweight (approx. 42% lighter than steel)Extreme mechanical and thermal resistanceRustproof and acid-resistantBlade length: 34, Handle: angled handleDrive size (in inches): 1/4, Drive profile: hexagon, Drive type: internal hexagon, Ball end: no, Short leg length: 34, Long leg length: 95
KS TOOLS Spiral drill bit HSS-G DIN 338 N 13.0mm 5-pack ground version 151mm long
HSS-G twist drill, pack of 5, diameter 13 mmDIN 338 type NConical body grind as point grind, right-hand cutCross grind as tip point118° point angle, 20 30° helix angleHigh runout accuracyHigh-performance steel, polished surface
KS Tools 117.1402 1/4 Inch Insulated Mini Torque Wrench with Reversible Ratchet Head, 5-25Nm
Mini torque wrench with protective insulationSwitchable single-arm leverDisplay with mechanical scaleSquare drive imperial: 1/4''Dimensions: Height 41 mm, Length 200 mm, Diameter 40 mmWeight: 420 gDip insulation according to DIN EN 60900
KS Tools 330.2091 HSS-G Twist Drill, 9.1 mm, pack of 10
HSS-G Twist Drill, 10-pack, Diameter 9.1 mmDIN 338 Type NConical body grind as point grind, right-hand cuttingCross grind as chisel edge118° point angle, 20 30° helix angleHigh runout accuracyHigh-performance steel, bare surfaceIdeal for use in various materials such as steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, temper, spheroidal, and die casting
KS Tools 150.2023 Cap pliers, 200 mm
Specially shaped pincers tip for optimal removal of wheel bolt caps2-component handle for effortless removal of hub capsWeight: 0.26 kgOverall length: 200 mmMaterial: Finest chrome vanadium steelMatte chrome-platedApplication: Assembly and disassembly of hub caps
KS Tools 142.4030 Electrician's hammer, French pattern with fiberglass handle, 200 g
Hammer with French styleWeight: 0.25 kgHammerhead weighs 200 gFiberglass handleOverall length: 285 mmHammer face width: 18 mmPartial length L2: 126 mm
KS TOOLS Double Open-End Wrench 41x46mm DIN 895, Phosphated
Double open-end torque wrench with a wrench size of 41 x 46 mmOverall length is 383 mmOutside dimension B1: 84 mm, outside dimension B2: 94 mmHead height: 14.8 mmMaterial: Finest chrome molybdenum steelStandard: DIN 895 / ISO 1085 / ISO 3318Suitable for particularly heavy assembliesPhosphated and made of chrome vanadium
KS Tools 330.6085 HSS-G Co 5 Short Twist Drill, 8.5 mm, Pack of 10
HSS-G Co 5 Twist Drill, short, pack of 10Diameter: 8.5 mmDIN 1897 Type NConical land grind as point grind, right-hand cuttingFrom 3 mm cross grind according to DIN 1412 C135° point angle, 20-30° spiral angleHigh-performance steel, gold-brown surfaceIdeal for use in steel, cast steel, up to approx. 1100 N/mm² tensile strength, rustand acid-resistant steels, V2a, V4a, gray and malleable cast iron
KS Tools 330.2087 HSS-G Twist Drill, 8.7 mm, pack of 10
HSS-G twist drill, 8.7mm, pack of 10DIN 338 type NConical body grind as point grindCross grind as tip sharpening118° point angle, 20 30° helix angleHigh runout accuracyHigh-performance steel, bright surfaceIdeally suitable for steel, alloyed and unalloyed cast steel up to 900 N/mm² tensile strength, bronze, brass, short-chipping aluminum alloys, graphite, nickel silver, sintered iron, gray, malleable, nodular and die casting.
KS TOOLS Magnetic Welding Mirror, Chrome-Plated Mirror, Flexible Arm, Freely Positionable
Mirror made of chrome-plated special tool steelOverall length of 500 mmWeight of 0.47 kgMirror width is 70 mmPartial length L2 of 80 mmReplacement mirror available with number 903.6001
KS Tools 150.9482 10 mm Special Shock Absorber Bit TX T50 Ford
Weight: 0.1 kgProfile: TORXDrive size: 10 mmOverall length: 92.5 mmTorx profile size: T50Material: Finest chrome vanadium steelApplication: Ford / Nissan
KS Tools 965.3814 3/8 inch Titan Plus Hex Socket, 14 mm
3/8'' TITANplus hexagon socket, metric, 14 mmAccording to DIN 3124 / ISO 2725Internal square drive according to DIN 3120 / ISO 1174 with ball retention groove100% non-magneticLightweight (approx. 42% lighter than steel)Extreme mechanical and thermal resistanceRustproof and acid-resistantMaterial: Titanium
KS TOOLS Screw hole punch, 35mm (129.0035)
Screw Hole Punch with 3-Point Cut-InHigh-Strength Screw and Positive Cutting GeometrySuitable for Cutting Thin SheetsBlued Surface Made of Special Tool SteelIdeal for V2A Sheets up to 1.5 mm and Other Materials up to 2.0 mmWeight: 0.378 kg, Diameter: 35 mmApplication Area: Sheets, Core Drill Diameter: 13 mm
KS Tools 500.8536 Hook Head for Wire Rope and Discs, Connection AG M14x1.5
System adapter for telescopic hammerWeight: 0.086 kgApplication area: Bodywork
KS TOOLS 1" Reversible Ratchet, 24 Tooth (911.1019)
Reversible ratchet wrench with 24-tooth ratchet mechanismDiameter: 70 mm, Length: 210 mm, Weight: 4.6 kgMaterial: Chrome-molybdenum steelDrive side: Square, Drive square: 25 mm (1 inch)Standards: DIN 3120, ISO 1174, DIN 3122, ISO 3315Head height: 35 mmFeatures: Quick-release socket function, reversibleReplacement gripping bar: 911.1021, Repair kit: 911.1099
KS Tools 515.3256 HM pointed arch milling cutter Form G, 16 mm
HM pointed arch router bit Form G, silver, Ø 16 mmHigher chip removal rate through cross serrationVersatile applicationsBare surfaceHigh-performance steel with carbide tipFor deburring, edge breaking, finishing, weld seam and surface processingUsable in highly alloyed, rust-, acidand heat-resistant steels, cast and plastics
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
