Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 38 of 38 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Benning Duspol Digital (050263)
Voltage testerPolarity testFrequency Range: 15 Hz - 1,000 HzMeasured Quantities : Continuity test, Diodes, Direction of Rotation, Frequency, Resistance, VoltageMeasurement Categories: CAT III 1000 V, CAT IV 600 VDisplay: YesAlternating Voltage (AC): 12 V - 1,000 VDirect Current Voltage (DC): 12 V - 1,200 V
£84.90
Benning DUSPOL digital (050264)
Voltage testerFrequency Range: 15 Hz - 1,000 HzMeasured Quantities : Continuity test, Direction of Rotation, Frequency, Resistance, VoltageMeasurement Categories: CAT III 1000 V, CAT IV 600 VDisplay: YesAlternating Voltage (AC): 12 V - 1000 VDirect Current Voltage (DC): 12 V - 1200 VWeight: 500 g
£166.14
Benning CM E1 True RMS (044684)
Ground clamp meter for earth loop resistance and leakage current measurementOptical & acoustic alarm function for excessive grounding resistanceMeasurement value memory for 116 measurementsTrue RMS measurementAC current measurement range: 0.3 mA 35 AEarth loop resistance measurement range: 0.025 Ohm 1,500 OhmDimensions: 27.6 x 10 x 4.7 cm (HxWxD)
£1,714.27
Benning MM 7-2 (044690)
MultimeterMultimeter Type: Digital MultimeterDisplay: YesMeasurement Categories: CAT III 1000 V, CAT IV 600 VMeasured Quantities : Capacity, Current, Frequency, Resistance, Temperature, VoltagePower Supply: BatteryDimensions: W89 mm x H193 mm x D51 mmWeight: 420 g
£286.49
Benning Duspol Analog (050261)
Voltage testerVoltage range: 12 V - 1000 V AC/DCRotation field testSingle-pole live conductor test (phase)Polarity testLoad switching via push button30 mA RCD trip via push buttonVibration alarm
£68.66
Benning CM 9-1 (044682)
Current clampDisplay: YesCAT IV 300 VPower Supply: Battery
£503.36
Benning IT 115 (044104)
Installation testerMeasurement range: line impedance, loop impedance, insulation resistance, protective conductor resistance, voltage, current, resistance, frequencyDisplay: YesDimensions: W23 Centimetre x H11.5 Centimetre x D10.3 CentimetreWeight: 1.5 kg
£1,191.12
Benning MM 6-2
MultimeterAccuracy: ± 0.5 %Display: YesCAT III 1000 VCAT IV 600 VResistance: 400 OhmPower Supply: Battery
Benning ST 725 (050316)
Device testerCAT II 300 VDisplay: YesAlternating Voltage (AC): 230 VProtection Rating: IP 40Dimensions: W11.5 Centimetre x H27 Centimetre x D5.5 CentimetreWeight: 950 g
£686.00
Benning IT 105 (044105)
Installation testerMeasuring range: line impedance, loop impedance, insulation resistance, voltage, resistance, frequencyDisplay: YesPower Supply: BatteryDimensions: W23.5 Centimetre x H9.2 Centimetre x D13.2 CentimetreWeight: 1.37 kg
Benning SDT 1
Socket testerVoltage range: 230 VFrequency range: 50 - 60 HzWeight: 70 g
Benning Adapter case MA 4 (044162)
Adapter caseFor active and passive testing of singleand three-phase CEE equipmentSuitable for complete DGUV Regulation 3 testing in combination with device testersLoad capacity up to 32 ATesting of devices and extension cables with IEC 60309-1 connectorsDimensions: 41 x 35 x 17 cmWeight: 6 kg
Benning MM2-3 (044693)
Multimeter with True-RMS and non-contact voltage detectionMeasurement categories: CAT IV 600V, CAT III 600V, CAT III 1000VMeasurement of voltage, current, resistance, frequency, capacitance, temperatureDisplay with 6000 countsMeasurement ranges: voltage 0.01 mV 1,000 V, current 0.01 µA 10 A, resistance 0.1 Ohm 40 MOhm, frequency 0.01 Hz 50 kHz, capacitance 0.01 nF 10 mF, temperature -40 °C 400 °CDimensions: 16.1 x 8 x 5 cm (HxWxD), weight: approx. 334 g
£197.96
source: Amazon
Benning VT1 (020054)
Non-contact phase and cable break testerSuitable for quick and easy phase testing on sockets, junction boxes, switches, and lampsLocates cable breaks and defective lamps in string lights and insulated cablesVoltage range: 200 V 1000 V ACLED test tip blink frequency and signal tone frequency increase with voltage levelCapacitive measuring method requires no current flow
£29.24
Benning IT 100 (044107)
MultimeterDisplay: YesMeasurement Categories: CAT IV 600 VPower Supply: BatteryDimensions: H20.6 Centimetre x D5.1 CentimetreWeight: 510 g
£483.95
Benning DUSPOL expert (050262)
Voltage testerMeasuring range: 12 - 690 VLEDWeight: 500 g
Benning CM 12 (044680)
Clamp meter multimeterAccuracy: 1 %Display: YesMeasurement Categories: CAT IV 600 VPower Supply: Battery
£507.08
Benning CM 10-1
Clamp meter multimeter for professional use in industry, service, and crafts4-digit LCD display with backlightMeasurement ranges: Voltage AC 0.1 V 1000 V, Current AC/DC 0.01 A 1500 A, Resistance 0.1 Ω 600 kΩ, Frequency 0.01 Hz 10 kHz, Capacitance 0.1 µF 1 mFAutoV function to suppress ghost voltagesBluetooth interface for transmitting measurement data to smartphone/tabletVolt sensor for non-contact phase and cable break detectionErgonomic and impact-resistant SoftGrip housingDimensions: 25.4 x 8.6 x 4.8 cm (HxWxD), Weight: 490 g
£482.92
Benning TA 7-16 Test Adapter
Measuring adapter for 5-pin 16 A CEE socketsMeasurement of Riso, ZLoop/ZLine, RCD, phase sequence, voltage, and frequency5 x 4 mm safety measurement sockets with color codingUniversally compatible with installation testers and multimetersMeasurement category CAT III 300 V
£127.59
Benning CM 1-2
Clamp meterDisplay: YesVoltage AC/DC: 0.1 V - 600 VJaw opening: 30 mm
Benning CM 10 PV
Voltage measurement up to 1500 V AC/2000 V DC via measurement adapter TA PVAutoV function for suppression of phantom voltagesMeasurement value transmission via Bluetooth to smartphone using appWith integrated LED test point illuminationVoltsensor (NCV) for non-contact phase and cable break testingTrue RMS measurementTemperature measurement using Type-K temperature sensorErgonomic and impact-resistant SoftGrip housing
Benning MM 10-PV (044089)
TRUE RMS digital multimeter for photovoltaic systemsTemperature range from -40 °C to +400 °CFrequency range from 0.01 Hz to 100 kHzContinuity and diode testing possibleMeasuring method: TRUE RMSCapacitance from 1 nF to 10 mFDC and AC voltage up to 2000 VDC and AC current up to 10 A
Benning CM P1
CM P1 from BenningPrecise measurement of load currents up to 400 AInrush current measurement (INRUSH) of motors and lighting systemsLow-pass filter (LPF, approx. 160 Hz) to suppress high-frequency pulses in switched motor drivesTRUE RMS AC current measurement up to 400 AVoltSensor (NCV) for contactless detection of phase voltage
Benning CM P2
Current clampAccuracy: 2%Display: YesCAT III 600 VProtective casePower Supply: Battery
Benning TRITEST easy (020051)
Suitable for electrical engineering, industry, maintenance, servicePhase sequence testing in three-phase networksGreen/red LED test tip for right/left phase sequenceTesting insulated cables such as cable reels, string lights, for wire breaksLED test tip blinking frequency and buzzer frequency increase with voltage dropAC voltage: 200-1000 VTotal length: 153 mm
Benning CM 11 (044067)
MultimeterDisplay: YesCAT IV 300 VPower Supply: BatteryDimensions: W7.6 Centimetre x H20.6 Centimetre x D3.3 CentimetreWeight: 300 g
Benning MM 5-2
MultimeterDisplay: YesVoltage AC/DC 0.1 mV - 600 VResistance: 0.1 Ω - 40 MΩPower Supply: Battery
Benning MM2-2 (044692)
True RMS Digital Multimeter BENNING MM 2-24-digit backlit LCD display (6,000 counts)Voltage sensor for non-contact phase and cable-break testingSuitable for electrical engineering, industry, service, trades, automotive, photovoltaicsBacklight for the LCD displayAutomatic and manual range selectionDimensions: 161x80x50 mm
£171.92
Benning MM 10-1 (044687)
TRUE RMS digital multimeterCAT IV 600 V ratingCounts: 6000Suitable for heating, ventilation, air conditioning technology, and tough service environmentsContents: 1 piece
Benning CM 2-1 (044689)
Multifunctional measuring device for electrical installation and industrySafe, non-contact measurement of high currentsTRUE RMS measurement method for precise resultsSuitable for measuring smaller currents (automotive, photovoltaics, industry)Measurement of current, voltage, resistance, frequency, and capacitanceContinuity and diode testingAuto V function with low input impedanceDimensions: 19.2 x 6.6 x 2.7 cm (HxWxD), Weight: 205 g
£278.11
Benning PROFIPOL+
Voltage testerMeasurement Categories: CAT II 690 V, CAT III 600 VDirect Current Voltage (DC): 12 - 690 VPower Supply: BatteryProtection Rating: IP 54
Benning CM 1-4 (2638967)
4-digit LCD display with 9,999 countsOpen current clamp, LED bar graph, phase and rotation field testingRotation direction testing via green LEDsVoltage display from 50 V with empty batteriesOne-handed operation for voltage measurement at outletsAutomatic range selection, data hold (HOLD)Material: plasticDimensions: Width 57 mm, Length 220 mm, Height 35 mm
£218.10
Benning CC 4-1 (044166)
AC clamp adapter CC 4-1 with a jaw opening of 52 mmMeasuring range from 0.1 mA to 1200 ASuitable for use with the installation tester BENNING IT 200IP40 protection class for indoor usePart of Benning's measuring, locating & testing devices
Benning MM 7-1
True RMS digital multimeter from BenningDigital display and analog bar graph4-digit LCD display with bargraph (6000 counts)Automatic range selection and shutdownAutoV function for automatic AC/DC voltage detection and low input impedance (LoZ)Volt sensor signals phase voltages and cable breaks without contactMeasurement category CAT IV 600 V, CAT III 1000 VDimensions: Width 88 mm, Length 180 mm, Height 33.5 mm
Benning PV 1-1 Plus (05042101)
Further development of the BENNING PV 1-1300% higher protection against transient short-circuit currentsModified housing with all-around rubber protectionSafe measurement connection during power supply from the PV systemAutomatic test sequence for open-circuit voltage, short-circuit current, and insulation resistanceWireless connection to the BENNING SUN 2 irradiation and temperature measuring deviceBacklit LC displayMeasuring ranges: insulation resistance, protective conductor resistance, open-circuit voltage, short-circuit current, load current, voltage
£2,320.34
Benning VT 2 (044055)
Housing made of impactand break-resistant ABS plasticOptical indicatorContactless phase tester/cable break detectorAutomatic shutdownCapacitive measuring method requires no current flowLED test tip blink frequency and signal tone frequency increase with voltage level
£60.00
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
