Ryobi RY18SPA-0

Cordless pump ideal for reducing swimming pool water level before rain season, or for emergency situations such as a basement flood. Super high flow rate means you can get the job done fast, without the hassle of setting up wires and finding power At the bottom of the pump, there is a latch to switch a filter on and off. When the filter is on you can use the pump in dirty water. The mesh will block out particles larger than 1mm in diameter. Switch filter off in clean water applications Three timer settings allows you to set the pump to either 5, 10 or 15 minutes. Leaving you free to get on with other tasks whilst the pump shifts water up to 4,200 litres per hour Intelligent pump communicates with beeps and flashes when it is blocked, disengaged or low battery helping you understand more about your tool Ryobi's run-dry auto shutoff feature means the unit will stop pumping water 30 seconds the water level drops below minimum suction level, This stops damage to your pump, Weight: 9.700339528 Pounds, Manufacturer: RYOBI

This is a bare tool - battery and charger are not included. The RYOBI 18V ONE+ Submersible Water Transfer Pump is ideal for displacing water from...