airconcentre - Love Shopping Direct Ltd (Trading as Air Con Centre)

The Lo-Carbon Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Lo-Carbon Solo Plus can be flush or surface mounted, with a 2 position 100mm circular spigot for rear entry or connecting to a vertical ducting system. The powerful centrifugal impeller allows installations using 100mm ducting in straight runs, whilst still achieving 15l/s as required by Building Regulations Approved Document F. Continuous running products, such as the Lo-Carbon Solo Plus, installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore only need to move the amount of air as outlined in table 5.1a and 5.1b of Building Regulations Approved Document F. The Lo-Carbon Solo Plus has an adjustable boost speed which is set at installation variable between a wall or duct setting for boost/override operation to meet Building Regulations thus ensuring minimum energy usage and low sound levels. All models have an optional speed for constant trickle ventilation (12l/s), selectable at installation. Depending on the model, the fan will switch from trickle (if selected) to boost via the pullcord/light switch/humidity sensor/PIR. All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axia’s flat ducting. Enclosure of the electrical components is manufactured from flame retardant grade material.

This extractor fan is designed for domestic bathrooms, toilets or other small rooms and features a 100 mm (4″) duct size with a centrifugal impeller that’s suitable for longer runs of ducting. It can be flush or surface mounted, and offers mounting flexibility (wall, ceiling or panel) with an adjustable rear or side-exit spigot for rear or vertical ducting. Operation is by a built-in pull-cord switch, with one of three speeds selectable at installation. The output performance ranges from approximately 9 litres/second (32 m³/h) at the trickle setting up to around 22 litres/second (80 m³/h) at high boost. Sound levels are impressively low (as low as ~11.5 dB(A) for trickle, ~34.5 dB(A) at 3 m for boost). The fan is filter-free (thanks to an innovative impeller design that eliminates the need for a filter), rated at IPX4 for use in bathroom environments, and meets UK Building Regulations (Approved Documents F & L) for domestic wet-room ventilation requirements.

This 100 mm centrifugal extractor fan by Vent Axia is designed for bathrooms, toilets or other small internal rooms. It uses a high-performance impeller that delivers up to 22 L/s (≈80 m³/h) airflow, which means it meets the minimum extraction rates required under UK regulations for ducted ventilation. In addition to strong airflow, the model is engineered for quieter performance — noise levels are around 30 dB(A) at 3 m, making it suitable for installations where low noise is valued. The housing is finished in white, and the unit is rated IPX4 (suitable for bathroom zones) with flexible mounting options (wall, ceiling, panel or window). A key feature is its built-in over-run timer which allows the fan to continue operating for an adjustable period (typically 5-30 minutes) after the light switch or trigger turns off — helping to clear residual moisture and steam. With its 100 mm spigot size and ability to handle straight runs of ducting up to 50 m (in certain configurations), it offers a flexible solution for installations where the external wall isn’t close.

The Vent‑Axia Svara 100 mm Lo‑Carbon Smart Extractor Fan (409802) is a highly capable axial extractor fan, designed for kitchens, bathrooms and utility rooms. Its 100 mm (4-inch) duct size makes it compatible with standard installations, and it’s part of the Lo-Carbon range meaning it emphasises energy efficiency and low operational cost. The unit operates on a DC motor consuming as little as 4 W in trickle mode, thereby minimising running costs. One of the key features of this model is its smart control via Bluetooth using the manufacturer’s app. Through the app you can configure a range of functions: select between continuous or intermittent operation, set up the humidistat to trigger high-flow when humidity rises (for example during a shower), activate the light sensor for automatic boost when someone enters the room, define silent hours when boost is disabled, and even enable a “holiday purge” mode every 12 hours. The built-in humidistat raises the extraction to roughly 30 l/s when humidity spikes, dropping to around 10 l/s when levels normalise. Another strong selling point is its quiet operation and flexible installation. On low trickle mode it runs at around 17 dB(A), making it virtually silent for most environments. The fan is IP44 rated (suitable for zone 2 in bathrooms) and can be mounted on the wall, ceiling or panel. In addition, the front module can be easily removed for cleaning, which is a helpful maintenance feature. Overall, this model presents a modern, smart, low-energy solution for domestic ventilation.

The Vent-Axia T-Series Darkroom Cowl Assembly Size 7 is an essential component for maintaining optimal conditions in darkroom environments. Designed specifically to provide effective light protection, this assembly ensures that your darkroom remains free from unwanted light intrusion. The robust construction and precise engineering of the cowl assembly make it a reliable choice for both professional and amateur photographers who require a controlled lighting environment. This darkroom cowl assembly is compatible with all T-Series fans, making it a versatile addition to your existing ventilation system. The interior cowl is designed to minimise light intrusion, ensuring that your darkroom remains perfectly dark. The exterior cowl adds an extra layer of protection, making this assembly ideal for use in various light-sensitive applications, including medical, dental, and veterinary settings. The sleek design and durable materials ensure long-lasting performance and easy maintenance. Installation of the Vent-Axia T-Series Darkroom Cowl Assembly is straightforward, with all necessary components included in the package. The assembly is designed to fit seamlessly with your existing T-Series fan setup, providing an efficient and effective solution for light protection. With its high-quality construction and reliable performance, the Vent-Axia T-Series Darkroom Cowl Assembly Size 7 is an excellent choice for anyone looking to enhance their darkroom or light-sensitive environment.

The Tempra units are designed for use in bathrooms, toilets, and utility areas. The Vent-Axia Lo-Carbon Tempra SELV HTP Single Room Heat Recovery Unit offers Safety Extra Low Voltage (SELV) and a constant trickle speed, with pull cord or switch live options to boost airflow. It features an adjustable 5–50 minute overrun timer, an optional 3-minute delay on the timer, and an internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls up to 318mm thick, and all installations can be carried out from inside the building. The Tempra’s simple construction allows it to be fitted in the same location as an existing 100mm diameter fan, while providing easy access to the heat exchanger for regular maintenance, ensuring ease of installation and upkeep. Under Building Regulations Document F, continuous running products such as the Lo-Carbon Tempra are only required to move an amount of air as specified in Table 5.1a of Document F. This ensures compliance with ventilation standards while providing efficient heat recovery and improved indoor air quality in single-room applications.

Under the Building Regulations Document F, continuous running products such as the Lo-Carbon Tempra are only required to move an amount of air as specified in Table 5.1a of Document F. This ensures that the unit meets legal ventilation standards while providing energy-efficient airflow for the space. The Vent-Axia Lo-Carbon Tempra SELV LP Single Room Heat Recovery Unit is available with Safety Extra Low Voltage, a constant trickle speed, and a pullcord or switch to boost airflow. The units are suitable for installation into external walls up to 460mm thick, and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation, the Tempra’s simple construction makes it relatively easy to fit in the same location as an existing 100mm diameter fan. It also offers easy access to the heat exchanger, allowing for regular maintenance without difficulty.

The Tempra units are designed for use in bathrooms, toilets, and utility areas. The Vent-Axia Lo-Carbon Tempra SELV LT Single Room Heat Recovery Unit offers Safety Extra Low Voltage (SELV), a constant trickle speed, and a switch live to boost airflow. It also features an adjustable five to fifty-minute overrun timer and an optional three-minute delay on the timer. The units are suitable for installation into external walls up to 460mm thick, and all installations can be carried out from inside the building. To facilitate ease of maintenance and installation, the Tempra’s simple construction allows it to be fitted in the same location as an existing 100mm diameter fan and provides easy access to the heat exchanger for regular maintenance. Under Building Regulations Document F, continuous running products such as the Lo-Carbon Tempra are only required to move an amount of air as specified in Table 5.1a of Document F. This ensures compliance with ventilation standards while providing efficient, low-energy heat recovery for single-room applications.

The Vent-Axia TX12IL is a 12-inch commercial-grade in-line extractor fan, designed for high-capacity ducted ventilation systems. With a robust airflow rating of 2,230 m³/h, it’s well-suited to large commercial or industrial applications where strong extraction is needed. Reliability is built in: it features a patented electronic shutter system that opens and closes instantly, providing reliable back-draught protection without compromising on sound or performance. For installation convenience, the model includes a “Top Socket” connector, making mains wiring faster and more straightforward. Designed to operate in a wide temperature range (–40°C to +50°C) and fitted with standard thermal overload protection (S.T.O.P.), the TX12IL is built to handle tough environments. When paired with a T-Series or Ecotronic controller, you can set variable speeds or even leave the shutter open for natural ventilation when the motor is off.

This extractor fan is part of the VA100 range from Vent‑Axia and is designed specifically for domestic bathrooms and toilets. It features a 100 mm (4″) duct size, making it suitable for typical residential installations on walls, ceilings or windows. The unit is finished in clean white and has an IP X4 rating, so it is suitable for use in humid bathroom zones. The VA100XP version with product code 251310 comes with a pull-cord override and an integral thermo-electric shutter that helps prevent back-draughts when the fan is not running. It also features a neon indicator light to show when the unit is active and is fitted with standard thermal overload protection for safety. Performance-wise, the fan delivers around 107 m³/h of extraction (≈ 30 l/s) at full speed, with a noise level of approximately 36 dB(A) and a power consumption of about 15 W. Its mounting options make it quite flexible and the shutter feature adds a useful measure of comfort by helping block drafts or outside noise when the fan is off.

The VA100LP is part of the VA100 range by Vent‑Axia, designed for domestic bathrooms, toilets and utility rooms. It features a 100 mm duct size and comes in a clean white finish, suitable for mounting on wall, ceiling, panel or in a window setup. In terms of performance, the fan delivers an extraction rate of 107 m³/h (~30 L/s) and a noise level of about 36 dB(A) at 3 m. It carries an IPX4 rating for bathroom-zone suitability and is rated for ambient temperatures up to +40 °C. The model includes a pull-cord switch and built-in neon indicator light for manual operation convenience. With its straightforward design and reliable build, the VA100LP offers a practical, no-frills ventilation solution for standard domestic wet rooms.

The VA100XHP is part of the VA100 domestic ventilation range from Vent‑Axia, tailored for bathrooms, toilets or utility rooms. It uses a 100 mm (4″) duct size and is compatible with wall, ceiling, window or panel installation. In terms of performance, this model provides an extraction rate of 107 m³/h (~30 L/s) according to technical specs. It operates with a noise level around 36 dB(A) at 3 m. Importantly, it features an integral humidistat (which activates when excess moisture is detected) and a thermo-electric shutter that prevents cold air ingress when the fan is idle. The unit is IPX4 rated for splash-resistance in bathroom zones, and is designed to comply with UK domestic ventilation guidelines (such as those referenced in Building Regulation Document F) for bathrooms. The clean white finish and compact size make it a practical, unobtrusive choice for residential installations.

The VA100XT is part of the VA100 domestic ventilation range from Vent‑Axia, designed specifically for bathrooms, toilets or utility areas. It uses a 100 mm (4″) duct connection and features a clean white finish, allowing for wall, ceiling, window or panel mounting. In terms of performance, the unit delivers an extraction rate of up to 107 m³/h (30 L/s) according to published specifications, and operates with a noise level around 36 dB(A) at 3 m. Notably, it is fitted with an electronic over-run timer (adjustable from about 3-20 minutes or more depending on install) and thermo-electric back-draught shutters that close when the fan is not running, helping to prevent cold air from entering when idle. The unit meets IPX4 (splash-proof) rating for bathroom installations and is designed to comply with building regulations (UK Document F) for domestic ventilation situations. The VA100XT is therefore a strong choice where you’re looking for a reliable, straightforward extractor fan with timer and shutter features.

The VA100LT is part of the VA100 series by Vent‑Axia, designed for domestic bathrooms, toilets and utility rooms. It uses a 100 mm duct connection and comes in a clean white finish suitable for ceiling, wall, panel or window mounting. In performance terms, the unit offers an extraction rate up to approximately 107 m³/h (30 L/s) with a noise level of just 36 dB(A) at 3 m. It features an integral adjustable over-run timer (factory set to ~25 minutes) so the fan continues to operate after the light or switch is turned off, helping clear lingering moisture. The VA100LT is rated IPX4 for use in bathroom zones, is designed for ambient temperatures up to +40 °C, and complies with UK ventilation regulations for domestic bathrooms (Document F) by exceeding the 15 L/s extraction requirement.

The Vent Axia VA100XHT is an 18W bathroom or toilet extractor fan with pre-settable integral auto-humidity control, adjustable electronic overrun timer, thermo-electric shutter and an indication light and can be mounted on a panel, wall or window. This extractor fan is suitable for ambient temperatures up to +40°C and is fitted with ball bearing motors for installation at any angle. The V100 range from Vent Axia is designed for domestic bathrooms and toilets; is finished in white and includes an indication light. There are versions available with options incorporating a pullcord, a thermally operated back-draught shutter, a timer with an adjustable overrun time (5-30 minutes) and with sensors and auto mode controllers to save energy by switching the extractor fan on only when needed and when the room is occupied. Please check the VA100 Axial Range Performance table and operations descriptions below to determine requirements. The VA100XHT is IPX4 rated and protected against water (dripping vertical, dripping slanted, spraying, splashing, immersion) and meets and exceeds the Building Regulation (Document F) requirements of 15 l/s (litres per second) for domestic bathrooms with integral toilets.

The Vent-Axia VA140/150VS is a robust axial extractor fan tailored for kitchens, utility rooms, and similar spaces, offering both effective odor removal and moisture control. Its integral variable speed controller enables the unit to operate across a range of speeds—down to 40% of maximum—allowing for more precise ventilation control as conditions change. The unit is IP44 rated, offering protection suitable for environments where splashing may occur, and comes with thermo-electric shutters to prevent back drafts when the fan is off. It is designed for flexible installation, supporting wall, ceiling, panel, or even window mounting, making it versatile for a variety of kitchen layouts. In performance terms, it delivers strong extraction (up to about 173 m³/h, according to supplier data) at a moderate noise level (around 36 dB(A)) and a power draw of ~18.8 W in its typical configuration. Backed by a 2-year guarantee, the VA140/150VS conforms to Building Regulations (Approved Document F) and comes with internal louvres meeting international safety standards.

The Vent-Axia VA140/150KHP 150mm 6" Axial Extractor Fan with Humidistat & Pullcord (140320) is engineered to enhance kitchen ventilation by effectively removing moisture and unpleasant odours. This model is equipped with a humidistat that intelligently detects humidity levels, ensuring optimal extraction performance while contributing to a healthier indoor environment. The fan features thermo electric shutters that prevent back draughts, complying with current Building Regulations Approved Document F. With an IP44 rating, it is suitable for various mounting options including wall, ceiling, panel, and window installations, making it a versatile choice for any kitchen setting.

The VA14/150KHP is a 150mm Spigot Single Speed Kitchen Extract Fan With a Adjustable Humidity (Between 62-82%RH) and a Overun timer between 3 to 30 Minutes. With features like a thermo electric shutter to prevent back draughts, and IP44 rating so that it can be installed in Zone 2 safely. Suitable for wall, ceiling, panel and window mounting and compliant to Building Regulations approved document F.Humidistat controlled kitchen extract fan with adjustable overrun timer (3-25 mins) Humidity adjustment 62-82% RH.Technical Specifications Power Consumption: 18.8 Watts Sound: 36 dB(A) at 3 Metres Wall Fixing Hole: 152mm Diameter Window Fixing Hole: 160mm Diameter IP Rating: IP44 Warranty: 2 Years Dimensions: Height: 216mm x Width 224mm x Depth: 60mm 150mm (6") Spigot Humidity Sensor adjustable between 62-82% and Pullcord Overide Extract Performance - 245 m3/hour or 68 Litres Per Second

VA140/150 extractor fan is designed with a 150 mm (6″) spigot diameter, making it suitable for domestic kitchen ventilation systems. It achieves an extraction rate of around 245 m³/hour (≈ 68 L/s) and a sound level of approximately 36 dB(A) at 3 metres. One of the standout features is the integrated pull-cord switch, allowing users to manually switch the unit on and off without the need for remote controllers or timers. The fan also includes thermoelectric shutters to prevent back-draught when the fan is not operating, and it meets the UK building regulation requirement for domestic kitchen extract ventilation (Approved Document F). From an installation perspective, the unit is rated IP44 (making it suitable for kitchen/utility environments), and it supports wall, ceiling, panel or window mounting, giving flexibility depending on the building layout. Its compact fascia (approx. 216 × 224 × 60 mm) ensures it can fit into many existing openings or ducts with minimal alteration.

This fan is designed for residential kitchen environments and offers a 150 mm (6″) spigot size, making it suitable for many standard ventilation ducts. It features a single speed motor and an adjustable over-run timer that can be set from about 3 to 30 minutes, helping ensure that odours and moisture are cleared even after you’ve finished cooking. Technically it delivers around 245 m³/hour (≈ 68 L/s) at 18.8 W with a sound level of approximately 36 dB(A) at 3 m, giving a decent balance of extraction performance and relatively quiet operation. The unit also includes thermoelectric shutters to prevent back-draughts, and is rated IP44, meaning it’s suitable for kitchen/utility zones under UK regulations. From an installation standpoint the fan is versatile: it can be mounted on a wall, ceiling, panel or window, and it complies with the requirements of UK Building Regulations (Approved Document F) for domestic powered extract ventilation. Its compact fascia dimensions (approximately 216 × 224 × 60 mm) make it manageable for retrofit and new-build alike.