airconcentre - Love Shopping Direct Ltd (Trading as Air Con Centre)

This 150 mm (6″) in-line mixed flow fan from Vent Axia is built for performance in ducted extraction systems. Thanks to its mixed-flow impeller and guide-vane design, it delivers higher air pressure — making it suitable for longer duct-runs or more complex extraction layouts compared with a standard axial fan. Installation has been designed for flexibility and ease of maintenance: the ACM150T supports both horizontal and vertical mounting, features a detachable motor core and rotating chassis for easier servicing, and comes with a three-speed motor selectable at installation. It is IP44 rated for protection against splashes and solid objects, and the casing uses a wipe-clean polymer finish for a neat appearance. In terms of practical specs: it works with a 150 mm duct size, offers airflow up to approximately 522 m³/h (145 L/s) at its higher setting, noise levels around 36 dB(A) at 3 m, and a power consumption around 48 W. The built-in timer means the fan can continue running for a set period after the trigger (for instance after a light or switch) which is useful in bathrooms or utility rooms.

The Vent‑Axia ACM200T 200mm In‑line Mixed Flow Extractor Fan is a robust and efficient in-line extraction solution designed for 200 mm (8") ducting systems. Manufactured in the UK by Vent‑Axia, it features a mixed-flow impeller which combines axial and centrifugal fan characteristics to deliver higher pressure and airflow compared with conventional axial models. It comes equipped with a built-in over-run timer (adjustable typically between 2-25 minutes) which allows the fan to continue running after the main switch-off to clear residual moisture or stale air. The motor is selectable for multiple speeds upon installation and is capable of being mounted horizontally or vertically, providing flexibility in tight or complex ductwork layouts. In terms of performance, the unit offers an extraction rate of approximately 225 l/s (≈810 m³/h) for large domestic or light commercial applications, with a noise level around 41 dB(A) at 3 metres in typical operation. The casing is IP44 rated for protection and has been designed for ease of maintenance—its removable motor core and rotating chassis simplify access and cleaning.

This in-line mixed-flow extractor fan features a 200 mm (8″) duct connection and is engineered for larger ducted ventilation systems in domestic or light commercial spaces. Its mixed-flow impeller generates significantly higher pressure than typical axial fans, making it capable of maintaining airflow through longer or more complex duct runs. Installation flexibility is a key strength: the ACM200 allows both horizontal and vertical mounting, and comes with a removable motor core and a rotating chassis to accommodate confined or awkward spaces. It is finished in a wipe-clean polymer casing and rated to IP44, suitable for many indoor applications including bathrooms or utility spaces. Performance-wise, this model is rated for airflow up to about 240 litres per second (≈ 864 m³/h) under certain conditions, with noise levels around 40-42 dB(A) at 3 m at higher speed settings. The motor is selectable in three speeds at installation, and the unit is built for installation simplicity and long-term reliability.

Vent-Axia has designed a complete range of Mixed Flow In-Line fans that are now quieter than any other product on the market. The impeller blade design with guide vanes provides optimum pressure characteristics and simple connectivity and quieter more efficient running provides the complete solution. The product is mounted using two straps that secure the motor chassis assembly to the footplate. The ACM Mixed Flow In-Line fan can operate in both horizontal and vertical positions and can be mounted to meet its optimum performance. All motors are fitted with Standard Thermal Overload Protection. (S.T.O.P.). There is an adjustable minimum speed setting. The controller is radio suppressed to BS EN 55014 and electrical connections for use with suitable external sensors are provided. Dimensions: H: 258.8mm x W: 296mm x D: 278mm

Vent-Axia has designed a complete range of Mixed Flow In-Line fans that are now quieter than any other product on the market. The impeller blade design with guide vanes provides optimum pressure characteristics and simple connectivity and quieter more efficient running provides the complete solution. The product is mounted using two straps that secure the motor chassis assembly to the footplate. The ACM Mixed Flow In-Line fan can operate in both horizontal and vertical positions and can be mounted to meet its optimum performance. All motors are fitted with Standard Thermal Overload Protection. (S.T.O.P.). There is an adjustable minimum speed setting. The controller is radio suppressed to BS EN 55014 and electrical connections for use with suitable external sensors are provided. 86 x 156 x 53mm (H x W x D).

This compact axial extractor fan is designed for 100 mm (4″) ducting and features an adjustable over-run timer, allowing the fan to keep running after the light or switch is turned off. It is wall, ceiling or panel mountable, making it suitable for bathrooms, WCs or other small rooms requiring basic ventilation. It delivers airflow in the region of 54 m³/h (≈15 L/s) in typical use, operates at just 16 W and produces around 32 dB(A) at 3 m, so it manages reasonable extraction while staying quiet. Finished in white with an IP44 rating for protection against splashes, this model offers a cost-effective solution for moisture and odour control in domestic settings. The timer function helps ensure extraction continues long enough to clear the air even after the switch is off.

The BAS150SLT is a slim-profile axial extractor fan designed for use in bathrooms, kitchens or utility rooms. It incorporates a 150mm (6″) duct connection and features an ultra-thin mounting depth (about 15mm beyond the installed surface) which gives it a sleek, discreet finish when fitted on a wall or panel. Functionally, it offers a single speed axial fan with an adjustable over-run timer (typically 5–30 minutes) so once the trigger (such as a light or switch) is turned off, the fan continues to run for the set period to clear residual moisture or odours. It also has an integral back-draught shutter to prevent external air ingress when the fan is off. In terms of performance and suitability, the BAS150SLT delivers approx. 228 m³/h airflow (≈63 l/s) under free‐air conditions, with a noise rating of about 45 dB(A) at 3 metres, and a power draw of around 16W. It is IPX4 rated, making it acceptable for wet zones in domestic properties (i.e., bathrooms).

This extractor fan is a 150 mm (6″) axial model from the Basics Slim Line range by Vent‑Axia, designed for wall, ceiling or panel mounting using the appropriate fixing kit. It operates at a single speed and is suitable for remote or light-switch activation. The unit comes with an integral back-draught shutter, helping to prevent air ingress when the fan is off. Performance-wise, the BAS150SLB delivers around 228 m³/h (≈63 L/s) of airflow under free air conditions, drawing about 16 W of power, and emits approximately 45 dB(A) at 3 m distance. It is rated IPX4, ensuring suitability for bathroom and kitchen environments where moisture may be present. In terms of design and installation convenience, the fan features an ultra-slim profile (about 15 mm depth) offering a discreet and modern aesthetic when mounted. It meets the required performance thresholds under UK building regulations (such as Approved Document F) for intermittent extract ventilation in bathrooms and kitchens.

This slim-profile axial extractor fan is designed for compact installation in bathrooms, toilets or small utility spaces. It uses a 100 mm (4″) duct and provides an extract rate of around 54 m³/h (15 l/s) in free air conditions. The unit is rated IP44, making it appropriate for areas where moisture may be present. Its design is very slim, projecting only about 15 mm beyond the mounting surface, which makes it ideal for tight panel or wall installations. The fan includes an integral back-draught shutter to prevent external air entering when the fan is off, reducing heat loss and unwanted drafts. Control is basic — the fan is meant for remote or light-switch operation rather than built-in timer or humidistat functions. This makes it a cost-effective choice where simple ventilation is sufficient. The noise level has been reported at around 38 dB(A) at 3 m distance.

This fan features a 100mm circular spigot and is designed for surface mounting into standard ducting for rooms such as kitchens, utility rooms or larger bathrooms. It is part of the “Centrif Duo” range by Vent‑Axia and uses a centrifugal impeller design to deliver stronger extraction through duct runs. Its key functional features include an integral humidistat (which senses relative humidity and automatically switches to boost mode) and a pull-cord or switch live option for manual override. The product supports selectable two-speed boost settings (for "kitchen" or "utility" mode at installation), and offers the option of a continuous trickle speed setting. From a performance standpoint, one data sheet lists the high boost mode at around 220 m³/h (≈ 61 l/s) with noise of ~51.8 dB(A) at 3 m; medium mode around 130 m³/h (≈36 l/s) and ~38 dB(A); and minimum/standby around 90 m³/h (≈25 l/s) and ~21.5 dB(A) in quiet mode. It is IPX4 rated (suitable for wet zones), incorporates a built-in back-draught shutter, and the motor uses greased-for-life bearings allowing installation at any angle.

The Vent-Axia Centrif Duo Pullcord Standard Model is part of a series of 100mm centrifugal extractor fans for the domestic environment and use in kitchens, utility rooms and large bathrooms. Surface mounting directly into standard 100mm diameter ducting, through the wall or ceiling installation. The range is designed to provide extraction levels that comply with Building Regulation requirements, with special humidity sensing variants for local authority use. The Centrif Duo Humidity Timer Pullcord is Intermittent on 1 of 2 speeds (Utility or Kitchen selectable at installation). Operation by integral humidity sensor or pullcord. Separate speeds selectable for humidistat and pullcord. Optional continuous trickle speed available at installation. The motor features greased-for-life ball bearings which allow the fan to be installed at any angle. Insulation is Class E. Double insulated appliance. Supply voltage 220- 240V/1/50Hz. The Centrif Duo has a 100mm circular spigot. The Flush mounting kit enables the spigot to be converted to a side outlet. The spigot also encloses a built-in, spring operated back draught shutter. The Centrif Duo Range can be wall mounted using a telescopic wall fitting kit available as an accessory (requires a 115mm diameter hole).

Window kit available for use in single or sealed double glazing and where sunstrate is up to 40mm thick.A simple to install window kit manufactured from durable ABS and compatable with Centra, the Silent Fan or the Silhouette 100.Will accommodate 110mm - 140mm diameter glazing hole.

This compact 100 mm axial extractor fan is engineered for wall or ceiling mounting in bathrooms or toilets, designed to quietly and efficiently remove moisture and stale air. It features a 100 mm duct size and offers an extraction rate of about 90 m³/h (≈ 25 l/s). The fan is rated IP44 for splash‑protection, making it suitable for use in relevant bathroom zones. A key feature is the integral back‑draft shutter, which prevents cold air from being drawn back into the room when the fan is off. Operation is via a pull‑cord switch, providing simple on/off control without the need for additional timer or humidity functions. According to its specification, it draws around 14 W of power and operates at a noise level of approximately 38 dB(A) at 3 m. In terms of installation and aesthetics, the fan offers a minimal, unobtrusive white round front that blends into bathroom decor. Its shallow depth profile (approx. 19 mm beyond the bezel) means it projects little from the mounting surface. It also meets the requirements of UK building regulations (such as Approved Document F) for intermittent mechanical extract in bathrooms.

The Vent-Axia Eclipse 150X is a circular axial extractor fan designed for wall or ceiling mounting in kitchens, bathrooms, utility rooms or toilets. Its 150 mm (6-inch) duct size enables stronger airflow compared to smaller fans, making it suitable for larger rooms or those with greater ventilation demand. It features an integral back-draft shutter that closes when the fan is off to prevent external air, odors or drafts from entering the building when the fan is idle. In terms of performance, this model delivers an airflow of about 260 m³/h (approximately 72 l/s) while consuming roughly 16 W of power. It produces sound levels of about 45 dB(A) at 3 m, making it relatively quiet for a fan of its capacity. Its front face diameter is approximately 201 mm, and the entire unit has a shallow depth (around 19 mm faceplate) for a discreet appearance on the wall. The Eclipse 150X holds an IPX4 rating, making it splash-proof and suitable for installation in bathrooms (within zones permitted under wiring regulations). It is designed to comply with Building Regulations (Approved Document F) for intermittent extract ventilation, ensuring it meets minimum airflow requirements. Its unobtrusive, almost flush-mount styling and back-draft shutter make it an effective yet visually subtle choice for domestic ventilation projects.

The Eclipse 100X is a compact and reliable axial extractor fan designed for use in bathrooms, toilets or small utility rooms. It connects to a standard 100 mm (4″) duct and offers a single-speed operation to maintain consistent air extraction. The unit is rated at IP44 for splash protection when mounted in zones 1 or 2, making it suitable for typical domestic wet-room environments. One of the key features of this model is the integral back-draught shutter, which prevents unwanted airflow entering from outside when the fan is off. This helps maintain indoor comfort and stops cold air or drafts from infiltrating the room through the duct. The sleek, round white fascia offers a clean, unobtrusive appearance that fits well with most bathroom or kitchen decors. In performance terms the Eclipse 100X delivers around 25 litres per second (≈ 90 m³/h) under free-air conditions, drawing about 14–15 W of power and operating at noise levels around 38 dB(A) at 3 metres. It supports wall or ceiling mounting and is designed to satisfy the basic domestic ventilation requirements as set out in Approved Document F.

The Vent-Axia Eclipse 100XT is a compact axial extractor fan designed specifically for bathroom or toilet ventilation. It features a 100 mm (4-inch) duct size and can be mounted on a wall or ceiling, giving flexibility during installation. It also includes a built-in backdraught shutter to prevent external air or odors reentering the room when the fan is not running. In terms of performance, this model delivers approximately 25 litres per second (around 90 m³/h) of airflow, while using a modest amount of power (around 14–23 W depending on source). It operates at a sound level of about 38 dB (measured at 3 metres), making it relatively quiet for a bathroom environment. One of the key conveniences is the adjustable over-run timer, which allows the fan to continue operating for between 5 to 30 minutes after the room is vacated, helping to remove lingering moisture. With its sleek, discreet circular design, IP44 rating (suitable for bathroom zones), and two-year warranty, it’s a generally practical and trade-trusted option for residential ventilation upgrades.

he Eclipse 150XP is a 150 mm (6-inch) axial extractor fan designed for mounting on walls, ceilings or panels in bathrooms, kitchens, utility rooms or toilets. It comes with a pullcord control built in, giving simple manual switching without needing a separate switch. An integral back-draught shutter helps prevent unwanted airflow or odors entering the space when the fan is off. In terms of performance, it delivers an extraction rate of around 220 m³/h (≈ 61 l/s) while consuming only ~16 W of power. i-Its acoustic output is about 45 dB(A) measured at 3 metres, which is relatively moderate for a fan of this capacity. The front face diameter is about 201 mm, and its low profile design results in only about 19 mm protrusion from the mounting surface. With an IPX4 rating, the unit offers splash protection, making it suitable for bathroom zones specified under wiring regulations. It is compliant with Building Regulations (Approved Document F) for intermittent extract ventilation, meaning it meets required standards for domestic ventilation. Its clean circular appearance and flush mounting make it a discreet choice in modern interiors.

The Vent-Axia Flush Mounting Kit for Centrif Duo and Quadra Extractor Fans (439256) is designed to provide an efficient and streamlined installation solution for your extractor fan systems. This kit comes complete with essential components such as a bezel, clips, and a 90° duct elbow, ensuring a seamless and reliable fit while maintaining a clean aesthetic in any space. The flush mounting feature allows for easy integration into ceilings or walls, making it an ideal choice for both residential and commercial applications. With its durable construction and thoughtful design, this mounting kit helps enhance air circulation and optimizes the performance of your extractor fans.

The Freshvent 100 range consists of passive ventilators that naturally deliver effective airflow for healthy indoor environments. When used alongside positive pressure ventilation systems, Freshvent 100 provides a vital outlet for circulating air, allowing stale indoor air to escape outdoors—without introducing unwanted noise or draughts. Designed with modern construction in mind, Freshvent 100 is ideal for today’s well-sealed homes, offering a sleek and efficient alternative to traditional slot or airbrick vents. It is equally suitable for older properties that have been upgraded with double glazing and insulation, helping to prevent condensation and maintain good air quality. While extractor fans are typically installed in kitchens, bathrooms, and utility rooms, the Freshvent 100’s natural ventilation design makes it perfect for “clean” living areas such as bedrooms, lounges, and workspaces—providing fresh air where it’s needed most.

The Vent-Axia Lo-Carbon PoziDry Pro PIV 200mm Positive Input Ventilation with Heater (476311) is a cutting-edge solution designed to tackle condensation and mould while significantly improving indoor air quality. This BBA-approved unit incorporates advanced Smart Sense™ Technology, providing simple control and data logging capabilities, making it adaptable to various dwelling sizes. Its low running costs, ultra-low sound level, and lightweight construction ensure discreet and almost silent operation, making it an ideal choice for any home. Equipped with a heater, the PoziDry Pro™ maintains a comfortable living environment by warming the incoming air. The unit draws fresh, filtered air from the loft, seamlessly replacing contaminated air through a strategically placed ceiling diffuser. This process not only enhances air quality but also helps to reduce moisture levels, preventing the growth of mould and mildew. The PoziDry Pro™ is designed for easy and flexible installation, catering to any home configuration with minimal effort. The Vent-Axia Lo-Carbon PoziDry Pro™ is an efficient and reliable ventilation solution that ensures a healthier living environment. Its innovative design and advanced features make it a valuable addition to any home, providing consistent and effective ventilation with minimal maintenance. Invest in the PoziDry Pro™ for a cleaner, fresher, and more comfortable indoor atmosphere