Sorry, nothing was found. Please change your selection and try again.
Showing 41 - 63 of 63 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Roco 61120 Transition Track G100
Track systemMaterial: plasticDesign: Installation of connector elements and switching contacts possibleLoad capacity: Equivalent to RocoLine bed track
Roco 42571 Right-hand curved turnout BWr5/6
Roco Line track with beddingRail profile: 2.1 mmFixed plug connections in the embankment baseCan be installed on carpet or floorAuthentic track bedding, no ballasting required
£28.88
Roco 61110 Straight Track G200 6 Pieces
Track Set for Model RailwaysMaterial: PlasticPlug connections at track ends for easy assemblySuitable for ages 15 and upDimensions: Length 200 mm
Roco Z21 XL Booster (10869)
Z21 XL BOOSTERSpecifically tuned for large tracks (0, 1, 2, G)High output power
source: OnBuy
Roco 42519 Uncoupling Track
Roco Line track with ballast bedRail profile: 2.1 mmFixed plug-in connections in the embankment baseNo tedious ballasting requiredContents: 1 piece
£23.25
Roco Left curved turnout radius 3/4 (42472)
H0 RocoLine (without roadbed) curved turnout, leftRadius: 419.6 mmContents: 1 pieceSimple marking system for tracksDistance from rail center to rail center: 61.6 mm
£27.38
source: OnBuy
Roco Z21 CAN HUB (10804)
Roco 10804 - Z21 CAN HUBAdditional 2 A power supply for the CAN busThree CAN outputsOne Z-CAN output with signal amplification for boostersIdeal for large layouts with many CAN devices
£86.00
Roco Z21 Detector x16 (10819)
Z21 Detector x16For 16 sectionsOccupancy detection via current monitoringConnection via R-BusConfiguration via button or POM-CV programming
£120.00
Roco Z21 Multimaus (10835)
Control unit for model railwaysCompatible with the old Lokmaus 2 systemUp to 9,999 locomotive addresses can be controlledUp to 29 functions per locomotive can be activatedSwitching of up to 1,024 magnetic accessories possible
£120.00
source: OnBuy
Roco Center piece for double track connection DGV15 (42598)
Roco Line track with ballast bedRail profile: 2.1 mmFixed connectors in embankment baseEasy setup on carpet or floorAuthentic track ballast, no ballasting required
£23.25
Roco Z21 single booster (10806)
Z21 BoosterItem No. 10806Model Building > Model Railways > Control > BoostersSuitable for model railroads
£250.00
Roco Switching power supply 120 watt (10857)
Power SupplyPower: 120 WattsProtection against short circuit, overload, overvoltage, overheatingIdeal for Z21 Dual Booster (Item No. 10807)Input Voltage: AC 100-240 V, Output Voltage: DC 20 V, Output Current: 6 A
£107.75
source: OnBuy
Roco Switching power supply 36 watt (10850)
Switching power supplyPower: 36 wattsProtection features: overload, short circuit, overvoltageIdeal for z21 CAN HUB and z21 Start digital control centerCompact design
£50.23
Roco 10896 - PluX22 Decoder (NEM 658)
PluX22 DecoderConnector: 22-pinUpgradeable, multiprotocol operationMotor control, programmable loco addressesDimensions: 22 x 15 x 3.5 mm
Roco 42498 Crossing K30
Crossing K30Track length: 119 mmCrossing angle: 30°Electrically continuous rail sectionsSuitable for double track connections with 15° turnouts or crossing turnouts
Roco Switching power supply 54 VA 10851
Switched-mode power supplySwitching power supplyPower: 54 wattsModel building > Model railway > Control > Digital controllers
£88.29
Roco 40292 Universal Underfloor Decoupler
RocoLine track without ballast shouldersSimple identification system for tracksVarious radii with 61.6 mm spacingSuitable for custom ballasting
source: OnBuy
Roco Z21 multi Loop (10797)
Feedback Loop ModuleEnables comfortable and safe operation of track layoutsVarious operating modes: Short-circuit detection, sensor tracks, track contacts, mixed operationCompatible with DCC, MM, RailCom, and analog operationSensor tracks should ideally be between 4.0 and 5.5 cm (H0) or 2.0 and 3.0 cm (N) long.
£81.00
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
