Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 40 of 74 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low

Voltcraft MF-80 (VC-13101375)
Non-destructive meter for detecting material moistureMeasurement range up to 40 mm penetration depthCM method as a legally approved measurement procedure in GermanyHold function for later reading with concealed displayAdjustable acoustic alarm for extreme valuesLow battery warningIncludes three AAA batteries in the package
£56.45

Voltcraft VMA-3L 16
Enables measurements on three-phase socketsMeasurements include low resistance of PE, insulation resistance, network internal resistance, loop impedance, RCD parameters, and phase sequenceCEE 16 A three-phase plug with 5 separate 4 mm sockets for L1, L2, L3, N, and PEFast and secure connection of testing devices to three-phase sockets

source: OnBuy
Voltcraft MS-229 LCD
Display of battery voltage and remaining capacityDetects bad cells quickly and easilyAdjustable discharge currentSuitable for cylindrical and button cells from 1.2 12 VDisplay of remaining capacity in %
£27.60

Voltcraft VMA-3L 32
Enables measurements on three-phase socketsMeasurements include low resistance of PE, insulation resistance, mains impedance, loop impedance, RCD parameters, and phase sequenceCEE 32 A three-phase plug with 5 separate 4 mm sockets for L1, L2, L3, N, and PEFast and secure connection of test devices to three-phase sockets

Voltcraft CPPS-160-84
Programmable laboratory power supply with flexible output controlAdjustable voltage and current up to max. 160 WPower limitation enables a wide range of output voltage and current3 memory slots for frequent settingsUSB interface and included software for extensive output scenarios and source simulations

Voltcraft EMZ-1000
Non-contact testing of grounding resistance in electrical installationsSelf-illuminating inverse LCD displayDisplay of resistance (0.010 1200 Ohm) and AC current (0.00 mA 20.0 A)Measurement data memory, adjustable alarm function, automatic shutdown, and data hold functionMicroprocessor-controlled for precise grounding resistance measurementIntegrated filtering technology minimizes measurement interferenceProtection class 2, double or reinforced insulation

source: OnBuy
Voltcraft PPS-11815
Laboratory power supply for low-voltage consumersAdjustable output up to max. 5 AConnection via 4 mm safety sockets and high-current screw terminal socketsStepless adjustment of voltage and current via digital rotary controlsClear display for value readoutCurrent limitation for constant current operation without short-circuit jumperProgrammable memory slots for different fixed voltages and current limitsControl via software and USB connection for cyclic workflows via PC
£261.50

Voltcraft MS-520
Contactless voltage and magnetic field tester for AC voltage and magnetic fieldsSafety rating CAT IV 1000 V, no direct contact requiredPhase detection with red glowing test tip and signal toneMagnetic field indication via yellow LED, alternating during simultaneous detectionProtection class IP65 against water and moistureDust-tight housing for long-term usabilityMeasurement point illumination by white LED for dark environments

Voltcraft KBM-700
Universal meter for pH, redox, conductivity, and temperaturePrecise measurements with simultaneous temperature displayUser-friendly design for laboratory and field useMemory function and automatic temperature compensationMicroprocessor-based design with large LCD displayAutomatic temperature compensationDisplay of slope percentage after calibration

Voltcraft TPT-210
Robust immersion probe with wide measurement rangeBanana plug for flexible connection to measuring deviceLightweight, handy handle with optimized ergonomicsWaterproof and temporarily resistant to temperatures up to 250 °CUsable for temperature measurement with pH meter KBM-1103mm penetration tip, silicone handle, and 1m highly flexible silicone cable

Voltcraft SDM-2125
Coating thickness gauge for ferrous and non-ferrous metalsMagnetic flux and eddy current measurementAutomatic substrate material detectionStorage of up to 500 data setsMeasurement possible at one or multiple pointsThree-color indicator light for limit value displayWeight including battery 180 g

Voltcraft BS-3.9/1m QVGA
Replacement or additional gooseneck camera for endoscope base unitsSemi-flexible gooseneck, maintains curved positionWaterproof camera probe with dimmable LED illuminationProbe is 1 m long with a diameter of 3.9 mmOptionally extendable up to 4 mIngress protection rating: IP67Requires compatible base endoscope for use
£174.26

Voltcraft VC-8252880
Waterproof temperature measuring device with input for Type K needle thermocouple sensorsSuitable for measurements in wet, dusty, and normal environmentsFully waterproof and dustproof (IP67)Sensor length of 150 mm and diameter of 3.3 mmHandle length of 99 mmConnection cable (2 m) with waterproof Type K connectorCompatible with all VOLTCRAFT Type K sensors with standard connector (adapter cable included)

Voltcraft TPT-205
Insertion probe with sensor type Pt1000Extra thin insertion tip Ø 1.5 mmLightweight, handy handle with optimized ergonomicsWater resistance allows complete immersionShort-term temperature resistance up to 250 °CSuitable for various applications in research, industry, kitchen, and householdAccuracy class A for high precision

Voltcraft PM-22
Optical power measurement of fiber optic systemsIntegrated laser source for continuity testing of fiber optic cablesQualitative assessment of fiber optic linesAdjustable wavelength during measurement operationRed laser diode with continuous light/blinking functionDual display for easy readingAuto power-off and low battery indicator

Voltcraft DPPS-32-15
Compact power supply with primary switched-mode technologyOutput voltage via 4 mm safety sockets up to 5 ARear high-current output for maximum current deliveryAdjustable output from 1 32 V/DC and 0 15 ARipple voltage less than 5 mVUSB programmableNumber of outputs: 1 x (DPPS-32-15)

Voltcraft PM-32
Compact and handy fiber optic power meterVisual fault indicator for absolute and relative measurementsUser calibration function and activatable red laser diodeDisplay of linear milliwatt and nonlinear decibel milliwatt valuesPower range from -70 to +10 dBmIntegrated LCD backlight for low-light testingShock-resistant housing, automatic shut-off when not in useIncludes carrying case for easy transport and protection
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0






























