Sorry, nothing was found. Please change your selection and try again.
Showing 641 - 680 of 1,765 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
KS Tools 152.1098 Glow Plug Reamer, M12 x 1.25
Glow plug reamer for thread size M12x1.25Weight: 80 grams
KS Tools 330.3108 HSS-G Co 5 Twist Drill, 10.8 mm, pack of 5
HSS-G Co 5 twist drill bitDIN 338 Type NConical body grind as point grindCross grind as tip sharpening130° point angleDiameter: 10.8 mm
KS TOOLS Tape Measure in Revolver Holder 50m Crank, Fiberglass Reinforced Tape 12.5mm
Weight: 1 kgLength: 50000 mmWidth: 13 mmMaterial: fiberglass-reinforced plastic tapeHousing: steel frame with plastic handleTolerance class: 3
KS Tools 920.2250 Classic 3-in-1 Ball Head Internal Hex L-Key Set, Long
3-in-1 Long Hex Key SetWith Ball End, Folding Holder, Imperial Sizes10 Pieces in SetLong Version, DIN ISO 2936Ideal for Hard-to-Reach ScrewsFully HardenedHandle with Dual Function (Holder / T-Handle)Matte Chrome-Plated, Special Tool Steel
KS Tools 115.8501 Water Pump Pliers Set, 2-piece, 10-12 Inch
Water pump plier set with 2 piecesAdjustable in 7 stepsWeight: 960 gTool handle surface: plastic coatedMaterial: chrome vanadium steelIndustrial settingSafety clamp protectionOptimal power transmission
KS Tools 117.1709 Insulated Cross Wrench, 14 x 17 x 19 x 22 mm
Cross wrench with protective insulationHexagonal dive insulation according to IEC 60900No connection between the steel hex insertsWrench sizes in mm: 14x17x19x22Overall length L1 in mm: 140.0Handle with dip-insulated grip insulationMaterial: Finest chrome vanadium steel
KS Tools 330.4088 HSS TiN Twist Drill, 8.8 mm, pack of 10
DIN 338 Type N drill bit with right-cutting conical margin grindTip grind with cross grind and 130° point angleHelix angle of 20-30° for high thermal hardness resistanceIdeal for steel, cast steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, malleable, spheroidal graphite, and die castingsHigh-performance steel for strengths up to 900 N/mm² or 1100 N/mm²Set of 10 hand-operated drill bits
KS TOOLS ERGOTORQUEmax Impact Cap Screwdriver Set, 6-piece, PZ + Slotted (151.1165)
ERGOTORQUEmax impact cap screwdriver set, 6-pieceWith 2-component handle and hex driveProtective impact cap on the handle endSquare drive according to DIN 3120 / ISO 1174 inside the impact capIdeal for use with T-handle screwdrivers and ratchetsHardened chrome vanadium blade, chrome-plated with blackened tip
KS Tools 330.4111 HSS TiN Twist Drill, 11.1 mm, pack of 5
HSS TiN Spiral Drill Bit, 11.1mm, Pack of 5Right-hand cutting with tapered body grind as point grindCross grind as tip shaping130° point angle, 20-30° helix angleHigh hot hardness resistanceIdeal for steel, cast steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, tempered, malleable, and die castingTiN-coated surface
KS TOOLS All-Steel Quick-Release Lever Clamp, 120-400mm (145.0418)
All-steel quick-release bar clamp with quick-release leverClamping span up to 400 mmDouble T-profile rail with back-tooth rackProfile rail made of steel, fixed and sliding bars forgedZinc-plated surfaceIdeal for steel and vehicle construction, secure and strong clamping with one-handed operation
KS Tools 117.3853 3/8 inch Insulated Socket, Extra Long, 10 mm
12-point FlankTraction profileInternal square drive according to DIN 3120 / ISO 1174 with ball catch grooveDip insulation according to IEC 60900Chrome vanadiumDiameter D1: 23Weight: 180Diameter D2: 19
KS Tools 700.1184 Nut Splitter, 22-27 mm
Special tool steel for breaking loose seized and rounded nutsSuitable for nuts up to strength class 6Overall length: 150.0 mmHead height: 18 mmWeight: 660 gMax. torque: 80 NmMaterial: Special tool steel
KS TOOLS VDE Cable Cutter 6' (150mm) 2K Handle/CR-V/NANO Chrome
Cable cutter made of tool steelPhosphated surfaceDiameter of 10 mmDIN/ISO: IEC60900Blade length of 15 mmCable cross-section up to 50 mm²Weight of 200 g2-component handle
KS Tools 162.0238 Point Chisel, octagonal, 20 x 800 mm
Chisel with octagonal shaftFully hardened working endsResharpenable tipGold-colored baked lacquer shaftPolished chrome-molybdenum alloyDiameter: 20 mmLength: 800 mm
KS Tools 330.2126 HSS-G Twist Drill, 12.6 mm, pack of 5
HSS-G twist drill, pack of 5, diameter 12.6 mmDIN 338 Type NConical flute grind as point grind, right-hand cuttingCross grind as tip sharpening118° point angle, 20 30° helix angleHigh runout accuracyHigh-performance steel, bright surfaceIdeal for use in steel, alloyed and unalloyed cast steel up to 900 N/mm² tensile strength, bronze, brass, short-chip aluminum alloys, graphite, nickel silver, sintered iron, gray, temper, spheroidal, and pressure castings
KS Tools 330.6053 HSS-G Co 5 Twist Drill Short, 5.3 mm, Pack of 10
High-Performance Steel Twist DrillDiameter: 5.3 mmOverall Length: 62 mmFlute Length: 36 mmPartial Length L2: 26 mmSuitable for Steel, Cast Steel, Ductile Iron
KS Tools 140.2188 5/16 Inch Special TX Wrench, T45
Special Torx wrench, T45Weight: 0.01 kgMaterial: Chrome Vanadium Steel, matte satin chrome platedDrive size inch: 5/16''With retaining collar and ball detentApplication: Assembly of hard-to-reach screws on door hinges
KS TOOLS ERGOTORQUE VDE flat nose pliers, 200mm (117.1291)
Flat nose pliers made of special tool steelMatte chrome-plated surfacePlastic-coated tool handleLength: 200 mmWeight: 230 gWith cutting functionSuitable for soft and medium-hard wire
KS Tools 117.1292 Classic 1000 V Curved Flat Nose Pliers, 200 mm
Tool manufacturer with customers in over 135 countriesConstruction with high strength and precise torqueReplaceable heads made from a single piece of alloyed steelBent flat-nose pliers, length 200 mmMatte chrome-plated surface, special tool steelDip-insulated according to IEC 60900Suitable for soft and medium-hard wirePlastic-coated tool handle
KS Tools 330.7073 HSS-G Twist Drill, 7.3 mm, pack of 10
HSS-G Spiral Drill Bit, Long, Pack of 10Diameter: 7.3 mmDIN 340 Type NConical Shank Grinding as Point Grinding, Right-Hand Cutting118° Point Angle, 20 30° Spiral AngleHigh-Performance Steel, Polished SurfaceSuitable for Various Materials such as Steel, Cast Steel, Bronze, Brass, Aluminum Alloys, Graphite, Nickel Silver, Sintered Iron, Gray, Tempered, Spheroidal, and Die Cast
KS Tools 330.3084 HSS-G Co 5 Twist Drill, 8.4 mm, Pack of 10
Twist drill bit with 8.4 mm diameterDIN 338 Type NRight-hand cutting with conical body grind as tip grindCross grind as tip sharpening130° point angle, 20 30° helix angleCobalt-alloyed high-performance steel with golden brown surfaceIdeal for unalloyed and alloyed steels up to 1100 N/mm² tensile strength, quenched and tempered steels, stainless and acid-resistant steels, hotand cold-work tool steels
KS Tools 150.2070-28 Rubber Cone, Small
Rubber cone, smallWeight: 0.06 kgKS Tools 150.2070-28
KS Tools 150.9482 10 mm Special Shock Absorber Bit TX T50 Ford
Weight: 0.1 kgProfile: TORXDrive size: 10 mmOverall length: 92.5 mmTorx profile size: T50Material: Finest chrome vanadium steelApplication: Ford / Nissan
KS TOOLS Chain puller head with smooth chain, Ø 30mm, 4 chains, 16mm spiral (900.2187)
Flexible tool for cleaning greasy and encrusted pipesSuitable for tight pipe bendsOptimal adjustment to pipe diameter via centrifugal forceGentle removal of contaminantsSpecial tool steel for stoneware and plastic pipesWeight: 0.24 kg, working range: 0.05 0.125 m, diameter: 30 mm, total length: 160 mmHigh-strength design with precise torque length
KS Tools 336.0022 HSS TiN Sheet Metal Countersink, ø 4-30 mm
HSS TiN Sheet Metal Countersink Bit, goldDiameter: 4 30 mmCountersink according to DIN 1412 CCross cut as countersinkRight-hand cutting118° point angle, 20 30° taper angleHigh-performance steel, TiN-coated surface
KS Tools 330.6075 HSS-G Co 5 Short Twist Drill, 7.5 mm, Pack of 10
Twist drill bit with 7.5 mm diameterDIN 1897 Type NRight-hand cuttingTapered land grind as point grindFrom 3 mm cross grind according to DIN 1412 CHigh-performance steel with gold-brown coatingIdeal for steel, cast steel, stainless and acid-resistant steels, V2a, V4a, gray and malleable cast iron
KS Tools 550.1032 Flexible Magnet, 400 mm
Flexible magnetic pick-up tool from KS TOOLSLoad capacity up to 200 gFlexible shaftVery thin 4 mm magnetic tipOne-component handle for easy handlingWeight: 0.02 kgLength: 400 mm
KS Tools 115.1032 Grip Pliers, 55 mm, L-175 mm
Body Repair Pliers from KS TOOLSWeight: 0.34 kgTotal Length: 175 mmJaw Size: 0 55 mmCutting Length: 24 mmMaterial: Chrome Vanadium SteelFinish: Nickel-Plated
KS Tools 960.1160 Micro Soldering Set, 10-piece
Gas-powered micro soldering iron up to 1300°C/2450°FWith piezo ignitionIdeal for fine workContinuously adjustable gas supplyRefillable with standard lighter gas/ISO butaneIncludes various tips, solder wire spool, soldering sponge
KS Tools 911.1021 1 Inch Universal Handle 550 mm
Weight: 2.55 kgDiameter: 28 mmOverall length: 540 mmMaterial: Finest chrome vanadium steel, matte satin chrome-platedMount size: 1''Functional attributes: lockableFeatures: with ball lock, for manual operation, matte satin, chrome vanadium
KS Tools 152.1180 Cleaning Brush for Injector Pin Bore
Cleaning brush for injector pin boreSuitable for injector pin boreProduct number: 152.1180Ideal for cleaning injector pin bores
KS Tools 965.0620 Titan Plus Combination Pliers, 160 mm
Combination pliers made of titaniumLength: 160 mmAccording to DIN ISO 57482-component handle for a secure grip100% antimagneticLightweight (approx. 42% lighter than steel)Rust-resistant and acid-proof
KS Tools 918.3826 3/8 inch Jointed Ratchet Handle 400 mm Chrome-plated, High-gloss Polished
Square drive according to DIN 3120 / ISO 1174Ball detent for hard-to-reach areasOverload protection for ratchets and torque wrenchesBlued head, high-gloss chrome-platedMaterial: finest chrome vanadium steelOverall length: 400 mmSquare drive inch: 3/8''
KS Tools 515.0103 1/2 inch Hex Power Socket Set, long, 3-piece, 17-21 mm
1 Piece 1/2 Hexagon Impact Socket Set, LongWeight: 0.86 kgProfile: 6-PointPieces in Set: 3 pc.Material: Finest Chrome Molybdenum SteelSquare Drive Inch: 1/2''
KS Tools 515.3552 Sanding belt for belt sander, grit 100, pack of 10
Sanding belts for pneumatic belt sander 515.3549Length: 330 mm, Width: 10 mmGrit size: 100Contents: 10 piecesWeight: 0.08 kgOverall length: 330 mmFeatures: Sanding belts for pneumatic belt sander 515.3549
KS Tools 330.3076 HSS-G Co 5 Twist Drill, 7.6 mm, pack of 10
Content: 10 piecesWeight: 0.33 kgDiameter: 7.6 mmOverall length: 117 mmClamp length: 42 mmPartial length L2: 75 mmMaterial: cobalt-alloyed high-performance steel
KS Tools 517.0436 Ultimate Plus Double Box-End Wrench with Hole, 36 mm
Double box wrench with hole, 36mmRing angle: 90 degrees offsetDiameter: 49.5 mmWeight: 2396 gLength: 380 mmSurface: matte satin chrome-platedMaterial: chrome-vanadium steelWrench size: 36 mm
KS TOOLS VAG camshaft locking tool (150.3034)
Weight: 0.37 kgApplication area: VAGFeatures: Locks both camshaft gears in TDC position, secure hold, high precision fitApplications: VAG 1.4 / 1.6 L gasoline engines Volkswagen Lupo, Polo, Golf IV, Bora, Audi A2, Seat, Škoda etc.
£53.57
KS Tools 620.3607 Universal Puller 2-arm, 50-450 mm
Universal puller with 2 armsClamping depth adjustable from 50 mm to 450 mmHydraulic spindle retrofit available for thread G1/2"Material: special tool steelWeight: 6.9 kgPuller hook width: 30 mm, total puller hook depth: 48 mm, puller hook tip height: 5 mm, puller hook tip depth: 25 mmMax. pressing force: 6 t, max. torque: 120 Nm
KS TOOLS Clamp with T-handle 160/80mm for locksmith / all-steel
All-steel screw clamp with lever, 80x160mmClamping depth up to 80mm, clamping range up to 160mmWeight: 500gT-handle tool gripSurface: galvanizedClamping/pulling force: 3000NSuitable for steel construction and automotive engineering
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
