Sorry, nothing was found. Please change your selection and try again.
Showing 921 - 960 of 1,765 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
KS Tools 700.1714 Press Sleeve, Inner Diameter 34 mm, Outer Diameter 44 mm
KS Tools Press SleeveInner Diameter 34mm, Outer Diameter 44mmManually operatedPower sourceOne piece
KS Tools 630.1102 Quick-Release Puller 3-Arm with Slim Hook, 25-130 mm
Quick-release puller with 3 armsClamping range from 25-130 mmSlim design, puller hook width 27 mmMaterial: special tool steelMax. pressing force of 5 tMax. torque of 90 NmExternal hex drive with 17 mm wrench sizeDimensions: height 3.6 mm, length 13 mm, width 27 mm
KS Tools 117.1702 Insulated Cross Wrench, 10 x 11 x 13 x 17 mm
Hexagonal insulating coating according to IEC 60900No connection between the steel hexagonal insertsChrome vanadium materialWeight: 0.23 kgProfile: HexagonalWrench sizes: 10 x 11 x 13 x 17 mmOverall length: 140 mmPartial length L2: 55 mm
KS Tools 330.3066 HSS-G Co 5 Twist Drill, 6.6 mm, pack of 10
Twist drill bit, 6.6mm, pack of 10DIN 338 Type N right-hand cuttingConical body grind as point grindCross grind as tip sharpening130° point angle, 20-30° helix angleHigh hot hardness resistanceIdeal for unalloyed and alloyed steels up to 1100 N/mm² tensile strength, quenched and tempered steels, stainless and acid-resistant steels, hotand cold-work tool steels
KS Tools 917.1450 1/4 inch Power Ball Joint
High-strength construction with precise torque lengthReplaceable heads made from a single piece of alloyed steelSuitable for electric screwdrivers with DIN 3120 / ISO 1174 driveLow running rotation and innovative ball designBreak-resistant and matt satin finish made of chrome vanadiumScrewed design, weight 0.03 kg, overall length 35 mm
KS Tools 330.2360 HSS-TiN Step Drill Bit, ø 6-36 mm
Hand-operated power sourceWeight: 0.255 kg11 levels availableDiameter: 6 36 mmOverall length: 82 mmMaterial: High-performance steelSurface: TiN-coated
KS Tools 330.4119 HSS TiN Twist Drill, 11.9 mm, pack of 5
Drill bit with right-hand cutting conical body grindTip grind with cross grind130° point angle, 20-30° helix angleHigh hot hardness resistance with TiN-coated surfaceIdeal for steel, cast steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, malleable, spheroidal, and pressure castingsHigh-performance steel
KS Tools 330.3116 HSS-G Co 5 Twist Drill, 11.6 mm, Pack of 5
DIN 338 Type N130° Point Angle, 20-30° Helix AngleHigh Hot Hardness ResistanceGolden Brown SurfaceCobalt-Alloyed High-Performance SteelIdeal for unalloyed and alloyed steels up to 1100 N/mm² tensile strengthSuitable for quenched and case-hardened steels, stainless and acid-resistant steels, hotand cold-work tool steels
KS Tools 330.3077 HSS-G Co 5 Twist Drill, 7.7 mm, Pack of 10
Contents: 10 piecesWeight: 0.33 kgDiameter: 7.7 mmOverall length: 117 mmClamp length: 42 mmPartial length L2: 75 mmMaterial: cobalt-alloyed high-performance steel
KS TOOLS Open-End Impact Wrench 41mm DIN 133, Chrome Vanadium, Phosphated
Weight: 0.92 kgProfile: MetricWidth: 88 mmWrench size: 41 mmOverall length: 227 mmHead height: 19.2 mmMaterial: Finest Chrome Molybdenum Steel
KS Tools 117.1385 1/2 Inch Insulated Socket, Extra Long, 22 mm, L-255 mm
Insulated socket with 1/2'' square driveWrench size of 22 mmOverall length of 255 mmMaterial: Chrome vanadium steelStandards: DIN 3120, DIN 7448, IEC 60900, ISO 1174Test certificate for 1000VDip insulation according to DIN EN 60900
KS Tools 515.1308 Carbide Spot Weld Drill, 10 mm, 44 mm
Carbide spot weld drill bit from KS ToolsDiameter: 10 mmOverall length: 44 mmFlute length: 33 mmRight-hand cutHigh-performance carbideSuitable for high-strength body panels
KS TOOLS Chain Thrower Head for Spirals 16mm 2 Smooth Chains 160mm Long
Flexible tool for greasy and encrusted pipesSuitable for tight pipe bendsCentrifugal force allows optimal adjustment to pipe diameterGentle removal of contaminantsFor final cleaning of stoneware and plastic pipesSpecial tool steel for high strengthReplaceable heads made of alloyed steel
KS Tools 119.2058 Circlip Pliers J2, 19-60 mm
One-piece construction made of alloyed steelHead exchange possible across the entire torque rangeDIN 5256 compliantAnti-slip, precision-turned tipsStable, straight design with rubber gripWeight: 0.15 kgOverall length: 180 mmDiameter (D1): 18 mm
KS TOOLS Scaffold Wrench, Reversible, 24x27mm (522.2427)
Flank traction profile with 32 teethHandle end with centering pinPhosphated chrome-vanadium materialReplaceable head made of alloy steelDimensions: height 57 mm, width 51 mm, length 360 mm
KS TOOLS Basic Universal Puller 3-arm, 20-160mm (630.4303)
Universal puller with 3 armsClamping depth of 36 mmWeight of 2500 gWidth of 20 mmMaterial: tool steelPressure force of 3.5 tClamping range up to 160 mmHeight of 6 mm, depth of 18 mm
KS TOOLS Assembly Adapter for Eccentric Connections, 40mm
Weight: 0.12 kgLength: 40 mmOuter Diameter: 42 mmInner Diameter: 26.5 mmTube Size Inch: 3/4''Material: Special Tool SteelExternal Hex Drive: 10 mm
KS Tools 300.0317 Stop Angle, 300 mm
Reference angle according to DIN 875/0, 300 mmPerpendicularity, parallelism, and flatness tolerances finely ground and calibratedInspection and side surfaces finely ground and calibratedWith stop and stainless steelIdeal for the most precise work and inspection in precision machine engineeringTolerances for perpendicularity, parallelism, and flatness finely ground and calibratedWith bumper for maximum precision
KS Tools 117.1718 Classic 1000 V Flat Nose Pliers, 200 mm
Dip insulation according to DIN ISO 5745 and IEC 60900Long jaws for soft and medium-hard wireInductively hardened precision bladesMatte chrome-plated special tool steelHead height: A1 10.5 cm, A2 3.5 cmDiameter: D1 18.0 cm, D2 5.0 cmOverall length: L1 200.0 cm, Partial length: L2 74.0 cm
KS Tools 700.1640 Tie Rod End Tool Set T4 6-piece
Professional assembly and disassembly of the upper control arms without removing the control armHardened spindle with ball lock for pressure pieces3 pressure pieces with spindle mount2 reducer forks with lock for base unitColor coding for installation and removal componentsApplications: Volkswagen T4 Bus / Multivan / California / Pickup etc.
KS TOOLS Rivetless Expander Head 16mm
Sleeve with a diameter of 16 mmSuitable for making T-branches on pipes for fittingless pipe installationPrecision drilling possibleSuitable for pipes with a maximum wall thickness of 2.5 mmMade from special tool steel
KS Tools 918.1336 1/2 inch Chrome Plus Bit Socket Set for Hexagon Socket Screws, Long
Hex Bit Socket Set, 6-pieceDrive side: Square 12.5 mm (1/2")Knurled design, chrome-plated surfaceMaterial: Chrome vanadium steelDIN/ISO Standards: DIN3120, ISO1174, DIN7422Screw head/nut profile: Hexagon socketWeight: 880 g, Length: 110 mm
KS Tools 117.1321 Insulated Metal Hacksaw, 280 mm
Metal hacksaw with protective insulationOverall length: 280 mmFrame made of reinforced flat steel 10 x 5 mmInsulated rotating handle for blade tensioningWeight: 0.225 kgDip insulation according to IEC 60900Material: steelReplacement blade: 997.1216
KS Tools 330.3081 HSS-G Co 5 Twist Drill, 8.1 mm, pack of 10
Twist drill bit made of HSS-G Co 5Diameter: 8.1 mmPack contents: 10 piecesDIN 338 Type NRight-hand cutting with conical body grind as point grind and cross grind as tipSuitable for unalloyed and alloyed steels up to 1100 N/mm² tensile strength, quenched and tempered steels, case-hardened steels, stainless and acid-resistant steels, as well as hotand cold-work steels.
KS TOOLS HSS Sheet Metal Countersink, Ø 5-20mm (336.0002)
HSS Sheet Metal Hole Saw by KS ToolsDiameter from 5 to 20 mmMaterial: Sheet steel, non-ferrous metal, plasticLength: 51 mmRight-hand cutting with 118° tip angleChip flute length: 20 mmWeight: 50 g
KS TOOLS Telescopic Standpipe Nut Wrench, Ø 10-32mm, L=275-455mm (126.1000)
Swiveling cross handle for optimal force transmissionSwiveling jaw for rightand left-hand threading3-stage adjustable telescopic extensionSpecial tool steel for high strengthOverall length adjustable from 275.0 mm to 455.0 mmDiameter adjustable from 10.0 mm to 32.0 mm
KS Tools 117.1373 1/2 inch Insulated Socket, Extra Long, 17 mm, L-145 mm
Hexagonal, in accordance with DIN 7448Immersion insulation according to IEC 60900Internal square drive according to DIN 3120/ISO 1174 with ball retention grooveChrome vanadiumStrength and precise torque lengthInterchangeable heads made of alloyed steelDovetail design for strong connection
KS Tools 117.1719 Classic 1000 V Insulated Bent Flat-Nose Pliers, 200 mm
Flat-nose pliers with coated working headCurved jaws for soft and medium-hard wireDip insulated according to IEC 60900Induction-hardened precision cutting edgesMatte chrome-platedSpecial tool steelLength: 200mm
KS Tools 117.1641 Insulated Plastic Flat Pliers, 190 mm
Plastic flat-nose pliers with protective insulationLength: 190 mmInsulated according to IEC 60900Suitable for work with electrical voltages up to 1000VComplies with DIN EN 60900 standardHead height: 9.0 mm
KS TOOLS root cutter for 22 mm spirals, cutting head Ø: 65 mm
Root cutter with a diameter of 65 mmSuitable for pipes with a 22 mm spiralMade of hardened and high-strength spring steelWeight: 0.35 kgWorking range: 0.075 0.1 mSuitable for use on root-invaded pipes
KS TOOLS machine screwdriver bit for SDS chuck, M6
FlankTraction profile wrench opening 15° angledWith lockable jointScrewdriver bit for machines with SDS shankDamage-free screwing in and out of studsSpecial tool steel
KS Tools 117.3857 3/8 inch Insulated Socket, Extra Long, 14 mm
12-point FlankTraction profile internal square drive according to DIN 3120 / ISO 1174Insulated for live work according to IEC 60900Weight: 0.22 kgWrench size: 14 mmOverall length: 135 mmMaterial: Finest chrome vanadium steelSquare drive imperial: 3/8''
KS TOOLS Open-End Impact Wrench 75mm DIN 133, Chrome Vanadium, Phosphated
Jaw opening angled at 15° with striking edge for heavy-duty installationsPhosphated chrome-vanadium materialWeight: 4.46 kgMetric profile, key size: 75 mmOverall length: 390 mm, head height: 31 mm, width: 161.5 mmConforms to DIN 133 standard, wrench shape: opening offset by 15°
KS Tools 332.0011 HSS Co Threading Die M, M16 x 2
Threading Die M, M16x2Material: High-Speed SteelSurface: PlainRight-Hand ThreadThread Pitch: 2 mmHead Height: 18 mmSuitable for unalloyed and low-alloy steels up to 900 N/mm² tensile strength and non-ferrous metals
KS Tools 330.4120 HSS TiN Twist Drill, 12 mm, pack of 5
Twist drill bit with 12 mm diameterPack of 5DIN 338 Type NRight-hand cuttingTapered body grind as point grindCross grind as tip sharpening130° point angle
KS TOOLS 3/4" Power Bit Socket Set, 6 pcs, TX + Spline (515.0010)
6-piece power bit socket setTorx with hole spline (XZN®) and internal squareShort version for machine operationMatte satin-finished chrome-molybdenumSquare drive in inches 3/4"Weight: 2200 g
KS TOOLS Mini Bender 3 in 1, BLACK 1/4"-5/16"-3/8", 90°
Precision two-handed bending up to 180° for copper, aluminum, brass, and mild steel pipesNo replacement of bending segments for 3 dimensionsNominal size and bending radius on the bending dieOverall length: 240.0 mm, diameter: 1/4", 5/16", 3/8"Suitable for copper, brass, and mild steel pipesMini pipe bender for precise bending
KS Tools 117.1656 Insulated Rubber Cover Sheet, 1200 mm
Rubber cover sheet with protective insulation, thickness 1.0Tearand puncture-resistantSuitable for outdoor applicationsHand-operatedDimensions: Width 1200 mm, Length 10000 mm
KS Tools 330.3094 HSS-G Co 5 Twist Drill, 9.4 mm, Pack of 10
Twist drill bit, 9.4mm, pack of 10DIN 338 Type N right-cuttingConical body grinding as point grindingCross grinding as tip tapering130° point angle, 20-30° helix angleHigh resistance to red heat hardnessCobalt-alloyed high-performance steelIdeal for unalloyed and alloyed steels up to 1100 N/mm², quenched and tempered steels, case-hardening steels, stainless and acid-resistant steels, hotand cold-work tool steels
KS TOOLS Spiral drill bit HSS-Co DIN 338 N 12.0mm 5-pack ground version 151mm long
Spiral drill bit HSS-G Co 5, 12mm, pack of 5DIN 338 type N right-cuttingConical body grind as tip grindCross grind as tip sharpening130° tip angle, 20-30° helix angleHigh thermal hardness resistanceIdeal for unalloyed and alloyed steels up to 1100 N/mm²
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
