Sorry, nothing was found. Please change your selection and try again.
Showing 961 - 1000 of 2,830 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
KS TOOLS Mobile Used Oil Collector 80 Liter with 11 Liter Tray
Used oil collection device with 60-liter capacityPneumatic pressure discharge with pressure gauge and safety valveMovable and steerable container with extra-large plastic wheelsAgile and workshop-suitable designCentrally mounted and height-adjustable round collection trayDischarge time of approx. 3 minutes at 0.8 barSide level indicator with measurement scale and clear fabric hose for discharge
KS Tools 330.2126 HSS-G Twist Drill, 12.6 mm, pack of 5
HSS-G twist drill, pack of 5, diameter 12.6 mmDIN 338 Type NConical flute grind as point grind, right-hand cuttingCross grind as tip sharpening118° point angle, 20 30° helix angleHigh runout accuracyHigh-performance steel, bright surfaceIdeal for use in steel, alloyed and unalloyed cast steel up to 900 N/mm² tensile strength, bronze, brass, short-chip aluminum alloys, graphite, nickel silver, sintered iron, gray, temper, spheroidal, and pressure castings
KS Tools 500.7330 Glow Plug Connector Pliers, 265 mm
Glow plug connector pliers, 265mmSuitable for very tight glow plug connectorsProper installation and removal of glow plug connectorsSpecially milled jaw profile for a secure gripFor hard-to-reach areas2-component handle for comfortable handling
KS TOOLS drain cleaning spiral with plastic inner core, Ø 22mm (900.2442)
Weight: 4.65 kgLength: 4500 mm, Diameter: 22 mmMaterial: Special tool steelFeatures: designed for work with large spiral lengths, for removing stubborn pipe deposits, high stability through plastic inner core, ideal for tight pipe bends, temperatureand weather-resistant, equipped with mounts for special accessoriesConstruction superior in strength and exact torque lengthReplaceable heads made from a single piece of alloyed steel
KS TOOLS 9x12mm Insert Reversible Ratchet with Fine-Toothed Switch Ratchet Head, 1/4 (516.2614)
Insert ratchet wrench with 9x12mm socketChrome-plated surfaceSquare drive with 6.3mm (1/4 inch)Dimensions: Width 27mm, Height 25mmWeight: 75gWith pin lock, fine-toothed, and release function
KS Tools 330.2100 HSS-G Twist Drill, 10 mm, pack of 5
HSS-G twist drill bit, pack of 5, diameter 10 mmDIN 338 type NConical body grind as point grind, right-cuttingCross grind as tip118° point angle, 20 30° spiral angleHigh runout accuracyHigh-performance steel, bright finish
KS TOOLS All-Steel Quick-Release Lever Clamp, 80-160mm (145.0402)
All-steel quick-release clampClamping depth up to 80 mmClamping capacity up to 160 mmWeight: 530 gSurface: zinc-platedClamping/pulling force: 3000 NHand-operated
KS Tools 515.2042 1/2 inch Aluminum Wheel Impact Socket, extra long, 21 mm
Impact socket for wheel mounting/dismountingHex internal square according to DIN 3121 / ISO 1174Extra long version for machine operationPlastic-coated for damage-free work on aluminum rimsReplaceable plastic sleeve, color-coded by wrench sizeMaterial: chrome-molybdenum steelDimensions: wrench size 21.0 mm, length 150 mm
KS TOOLS 1/2" Special Reaming Socket, 17mm (913.1291)
Special socket for bolts and nutsDrive side: square, drive square: 12.5 mm (1/2")Weight: 300 g, length: 145 mmMaterial: chrome-molybdenum steelInternal square drive according to DIN 3120 / ISO 1174 with ball catch grooveExtra-long version for machine operationPhosphated chrome-molybdenum, suitable for VAG and all vehicles with wheel nuts or bolts
KS TOOLS Filter spider 3-arm, Ø 80-120mm (700.5001)
Filter tension wrench made of special tool steelContinuously adjustable for various large oil filtersSuitable for installation and removal of filters and filter cartridgesAlso for hard-to-reach filter housingsCheckered and hardened contact surfaces for secure gripSquare drive in inch 1/2, external hex drive 24 mmDimensions: diameter 80-120 mm, weight 0.63 kg
KS TOOLS Chisel Set, 4-Piece, Fiberglass-Reinforced Plastic
Paint-safe removal of trim and window moldingsFlexible chisel blade with striking cap for light tapsErgonomic handle made of special plasticSuitable for removing labels and adhesive and nameplatesSurfaces are not damagedSharpenable with a fileSolvent-resistant
KS Tools 330.2352 HSS-TiN Step Drill Bit, ø 4-22 mm
Weight: 0.085 kgNumber of steps: 10Diameter: 4 22 mmTotal length: 76 mmShank diameter: 10 mmClamping length: 20 mmMaterial: High-performance steel
KS Tools 516.3530 1/2 inch Short-Range Torque Wrench with Through-Square Drive, 25-150 Nm
Short-path torque wrench, 1/2'', 25-150 NmTrigger accuracy: ±4% tolerance of the set scale valueConsistently accurate and precise for at least 5,000 load cyclesChange operating direction by reversing the drive squareQuadruple scale in Nm, Kg•fm, lbf•in, and lbf•ft divisions for precise adjustmentClearly audible and tactile torque release via short-path triggerTorque setting through crank mechanism operation in the handleSquare drive according to DIN 3120 / ISO 1174 with ball lockingIndividual serial number for clear product identificationIncludes calibration conformity certificate according to DIN EN ISO 6789:2017(E) – traceable to national standards
KS TOOLS Chain Puller Head with Spike Chain, Ø 30mm, 4 Chains, 16mm Spiral (900.2188)
Chain flail head made of special tool steelHand-operated, no external power source requiredSuitable for greasy and encrusted pipesFlexible design for tight pipe bendsPipe-friendly removal of contaminants4 spike chains with a diameter of 30 mmOverall length of 160 mm, weight of 0.27 kg
KS TOOLS 1" Hexagon Torsion Impact Socket, extra long, 33mmx550Nm (515.1468)
Weight: 3.75 lbIdeal for controlled tightening of wheel bolts and nuts with impact wrenchesInternal square according to DIN 3121 / ISO 1174Extra-long design for machine operationPhosphated chrome-molybdenum material1" Hex torsion power socket, XL, 33 mm, 550 Nm
KS Tools 500.7335 Glow Plug Removal Pliers, 260 mm
Glow Plug Removal Pliers with Rubber HandleLongitudinally arranged serrated jawsSelf-opening mechanism in the plier jawsFor pulling glow plugs out of the cylinder headAlso enables removal of broken glow pinsOptimal power transmission for twisting and pulling movementsMade of special tool steelDimensions: 260 mm
KS Tools 965.3905 3/8 Inch Titan Plus Hex Socket, 9/16 Inch
Titanium socket insert6-sided profile according to DIN 3124 / ISO 2725-1Internal square according to DIN 3120 / ISO 1174 with ball retention groove100% non-magneticLightweight (approximately 42% lighter than steel)Rustproof and acid-resistant
KS TOOLS 1/2" Insulated Reversible Ratchet, 32 Tooth (117.1200)
Insulated reversible ratchet with 1/2" square driveBall detent according to DIN3120 / ISO 1174Dip insulation according to IEC 60900Reversible 32-tooth ratchet headSecure locking mechanism on the square driveMade from special tool steelBased on DIN 7449
KS Tools 645.0254 Puller Hook, 500 mm
Weight: 1.499 kgPuller Hook Width: 50 mmPuller Hook Total Depth: 55 mmPuller Hook Tip Height: 10 mmPuller Hook Tip Depth: 33 mmMaterial: Special Tool Steel
KS Tools 150.5080 Threadfix Repair Kit M14 x 1.25 for Spark Plugs, 20-piece
Repair kit for damaged or worn threadsIdeal for spark plugsEasy handling and professional repairSecure and gas-tight fit of insertsThin-walled inserts with corrosion protectionIncludes thread tap and installation toolQuick repair solution without complex inventory managementDimensions: M14 x 1.25 x 120 mm, M14 x 1.25 x 135 mm
KS TOOLS 1" CLASSIC Hex Socket, short, 63mm (911.1063)
1'' hexagonal socket, metric, 63 mm6-point flank traction profile according to DIN 3124 / ISO 2725Internal square drive according to DIN 3120 / ISO 1174 with ball-retaining grooveShort version for manual operationMatte satin-finished chrome vanadium
KS Tools 152.1098 Glow Plug Reamer, M12 x 1.25
Glow plug reamer for thread size M12x1.25Weight: 80 grams
KS Tools 965.0134 Titan Plus Double Open-End Wrench, 11 x 14 mm
Jaw angle 15° bent100% antimagneticLightweight (approx. 42% lighter than steel)Extreme mechanical and thermal resistanceRustproof and acid-resistantMaterial: Titanium
KS Tools 920.2300 Classic 3-in-1 Internal Hexagon L-Key Set, extra long, 10-piece
3-in-1 L-Wrench Set XLInternal Hex, Metric10 PiecesExtra Long VersionDIN ISO 2936Handle with Dual Function (Holder / T-Handle)Fully HardenedMatt Chrome-PlatedSpecial Tool Steel
KS TOOLS Socket Holder for 1/2" Sockets, 13 Holes (860.0895)
Suitable for hole size 10 x 10 mmHole spacing 38 mmIncluding locking screwBase plate thickness 1.5 mmGalvanizedSteel sheet
KS Tools 330.4099 HSS TiN Twist Drill, 9.9 mm, pack of 10
HSS TiN twist drill bits, pack of 10, diameter 9.9 mmDIN 338 Type N, right-hand cuttingTapered body grind as tip grind, cross grind as point130° point angle, 20 30° helix angleHigh heat resistance, TiN-coated surfaceIdeal for steel, alloyed and unalloyed cast steel up to 900 N/mm² tensile strength, bronze, brass, short chip-forming aluminum alloys, graphite, nickel silver, sintered iron, grey, temper, spheroidal graphite, and die castingHigh-performance steel
KS Tools 620.1703 Quick-Release Universal Puller 2-Arm, 50-160 mm
Quick-release function for internal and external pullersRetrofit hydraulic spindle for thread G1/2" / G3/4"Weight: 3 kgPuller hook width: 25 mmClamping depth: 150 mmMaterial: special tool steel
KS TOOLS Wheel Hub Grinder Type 1, Ø 160mm 1-1/2"(External Hex), max.1500 RPM
Cleaning disc for wheel hubs and brake discsSuitable for passenger cars, vans, and large limousine wheel hubs up to Ø 160 mmOptimized for wheel hubs with enlarged inner diameter (Ø 60 mm)Grinding pad with 10 mm pin mountCompatible with drills and cordless screwdrivers (max. speed 1,500 rpm)Velcro fastener for quick cleaning disc changesLow wear with a service life of approx. 100 vehicles per discMinimal dust generation thanks to open-pored abrasive and cup-shaped grinding padPackage dimensions: 17.2 x 13.0 x 17.2 cmWeight: 0.8 kg
KS Tools 330.7125 HSS-G Twist Drill, 12.5 mm, pack of 5
5-piece set HSS-G twist drills, diameter 12.5 mmDIN 340 Type N, right-hand cuttingTapered mantle grind as point grind, 118° point angle20-30° helix angle, high concentricityHigh-performance steel, polished surfaceIdeal for steel, cast steel, up to approx. 900 N/mm² tensile strength, bronze, brass, short-chipping aluminum alloys, graphite, nickel silver, sintered iron, gray, temper, spheroidal, and die cast.
KS TOOLS 1" CLASSIC Hex Socket, short, 77mm (911.1077)
1 short hex socket, 77mmFlank traction profile according to DIN 3124 / ISO 2725Internal square drive according to DIN 3120 / ISO 1174 with ball retention grooveManual operation, matte satin finishMaterial: Chrome vanadium steelWeight: 2250gDimensions: Diameter 1: 101mm, Diameter 2: 68mm, Length: 101mm
KS TOOLS 1/2" Bit Socket Set for TX Screws, Long, 9-Piece, T20-T60 (911.1520)
Torx internal square drive according to DIN 3120 / ISO 1174Ball catch groove, long versionPressed-in bite insert for manual operationMatte satin chrome vanadiumIncluding mounting rail9-piece set, Torx T20-T60TX internal square drive according to DIN 3120 / ISO 1174
source: Amazon
KS TOOLS Solder Wick Holder Pliers, 245mm (115.1052)
For securely fixing power leadsPrevents bending of the solder jointLocking pliers allow hands-free solderingNo more burns on fingersSlim design for hard-to-reach areasAdjustable jaws for optimal useWith self-closing spring and locking mechanismImmersion-insulated handle made of chrome-molybdenum
£30.90
KS Tools 130.0122 4in1 Refrigeration-Climate Ratchet Wrench, Reversible, 140 mm
Special tool steelSelector switch for 3/16“, 1/4“, 5/16“ + 3/8“Right-left functionOverall length: 140 mmHeight: 22 mmWeight: 120 g
KS TOOLS Spiral Drill Bit HSS-Co DIN 338 N 13.0mm 5-Pack / Ground Version / 151mm Long
DIN 338 Type N right-cuttingTapered shank grind as point grindCross grind as tip grinding130° point anglehigh hot hardness resistancegold-brown surfacecobalt-alloyed high-performance steelContent: 5 piecesWeight: 0.515 kgDiameter: 13 mm
KS TOOLS Scraper Set 4-piece (2-component handles) Stainless Steel Blades (2 x 25mm / 2 x 32mm)
4-piece set, straight shapeWeight: 0.58 kgMaterial: Inox (stainless steel)Ideal for removing plaques, sealing, and adhesive residuesAlso suitable for separating and chiseling sheets or weld spotsContinuous, resharpenable stainless steel blade with attachment loopWith striking cap at the handle end and ergonomically shaped 2-component handleExtreme intergranular corrosion and oxidation resistanceAutoclavable (heating tools above 100°C for germ elimination)Rustproof and acid-resistant stainless steel
KS Tools 330.3099 HSS-G Co 5 Twist Drill, 9.9 mm, pack of 10
Twist drill bit, pack of 10, diameter 9.9 mmDIN 338 Type N130° point angle, 20 30° helix angleCobalt-alloyed high-performance steel, gold-brown surfaceIdeal for unalloyed and alloyed steels up to 1100 N/mm² tensile strengthSuitable for quenched and tempered steels, stainless and acid-resistant steels, hot and cold work steelsHigh hot hardness resistance
KS Tools 517.0436 Ultimate Plus Double Box-End Wrench with Hole, 36 mm
Double box wrench with hole, 36mmRing angle: 90 degrees offsetDiameter: 49.5 mmWeight: 2396 gLength: 380 mmSurface: matte satin chrome-platedMaterial: chrome-vanadium steelWrench size: 36 mmScrew head/nut profile: hexagon, 6-point head 90° offset with through hole
KS Tools 330.7092 HSS-G Twist Drill, 9.2 mm, pack of 10
DIN 340 Type NRight-Cutting Tapered Body GrindTip Grind with 118° Point Angle20-30° Helix AngleHigh Runout AccuracyBare SurfaceHigh-Performance SteelIdeal for various materials such as steel, cast steel, bronze, brass, aluminum alloys, graphite, nickel silver, sintered iron, gray, malleable, spheroidal, and pressure castings.
KS Tools 115.1085 Welding Grip Pliers Set, 5-piece, CroMo
Set of 5 axial locking pliersSuitable for use in automotive and motorcycle sectorsVersatile for various applicationsFor external use onlyPackage weight 2.58 kg
KS TOOLS Screw-in adapter AG UN: 1.1/2" x IG: M18 x 1.5
Adapter with external thread M20x1.5 and internal thread M18x1.5Suitable for use in the chassisWide selection of tools for springs, shock absorbers, wheels, tires, brakes, and steering
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
