Sorry, nothing was found. Please change your selection and try again.
Showing 761 - 800 of 1,765 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
KS TOOLS Protractor 0°-180°, Non-reflective Engraving 400mm Arm Length/200mm Base Plate
Angle protractor made of stainless steelLength: 400 mmHalf-round arc with locking screw2 opposing degree scales2 opposing scales with mm divisions on top and bottom edgesMatte, non-reflective finish
KS TOOLS 3/4" Axle Nut Socket 85mm, Ø 118mm (450.0201)
With 36 mm drive hexagonSecure grip on the axle nutPrevents slippingMilled-out profileDrive compatible with impact wrench or torque wrenchSpecial tool steel
KS-Tools 900.2422 Replacement Spiral Pipe Cleaner
Suitable for pipe cleaning machines 6, 8 + 10Ideal for minor clogs caused by textiles and cellulose materialsIntegrated beak drill made of special tool steelLength: 9.5 mWeight: 3500 gDiameter: 10.0 mmAccessory with beak drillMaterial: special tool steel
KS TOOLS 1" CLASSIC Hex Socket, short, 71mm (911.1071)
Internal square drive, DIN 3120 / ISO 1174Short version, manual operationMaterial: chrome vanadium steelWeight: 2100 g, length: 93 mm
KS Tools 630.0104 Universal Puller 3-arm, 50-200 mm
Manually operated power sourceEven load distribution and centered tightening by repositioning the hooksUsable as both internal and external pullerRetrofit hydraulic spindle for G1/2" threadReduced required forceMade from special tool steel
KS Tools 330.2127 HSS-G Twist Drill, 12.7 mm, pack of 5
HSS-G twist drill, 12.7 mm, pack of 5DIN 338 Type N, right-cuttingTapered body grind, cross grind 118°Ideal for steel, cast steel, aluminum alloysWeight: 0.515 kg, length: 151 mmMaterial: high-performance steel, surface: plain
KS Tools 330.3113 HSS-G Co 5 Twist Drill, 11.3 mm, Pack of 5
Twist drill bit, 11.3mm, pack of 5DIN 338 Type N right-hand cuttingConical body grind as tip grindCross grind as point split130° point angle, 20-30° helix angleHigh hot hardness resistanceCobalt-alloyed high-performance steelIdeal for unalloyed and alloyed steels up to 1100 N/mm² tensile strength, quenched and tempered steels, case-hardened steels, stainless and acid-resistant steels, hotand cold-work steels
KS Tools 516.3245 1/4 inch ESD torque screwdriver with micrometer scale, 400-1000 cNm
1/4'' ESD torque screwdriver with micrometer scaleTrigger accuracy: ±6% tolerance of the set scale valueRepeatable and precise for at least 5,000 load cyclesFor controlled clockwise and counterclockwise tighteningIncludes divisible Nm micrometer scale for fine and precise adjustmentErgonomic handle design for secure torque transmissionLightweight construction with aluminum handlesElectrically conductive safe against electrostatic discharge
KS Tools 140.2182 5/16 Inch Bit Ratchet, 140 mm
Bit ratchet with angled designWeight: 0.11 kgOverall length: 140 mmMaterial: Finest chrome vanadium steel, matte satin chrome platedDrive size: 5/16''Application: Installation of hard-to-reach screws on door hinges
KS Tools 330.7125 HSS-G Twist Drill, 12.5 mm, pack of 5
5-piece set HSS-G twist drills, diameter 12.5 mmDIN 340 Type N, right-hand cuttingTapered mantle grind as point grind, 118° point angle20-30° helix angle, high concentricityHigh-performance steel, polished surfaceIdeal for steel, cast steel, up to approx. 900 N/mm² tensile strength, bronze, brass, short-chipping aluminum alloys, graphite, nickel silver, sintered iron, gray, temper, spheroidal, and die cast.
KS TOOLS aluminum profile spirit level, 1000mm (204.5900)
Aluminum profile level, HxW 50 x 22 mmOverall length 1000 mmSmooth aluminum rectangular profileLightweight profileAccuracy of 0.5 mm per meter1.8 mm wall thicknessWith hanging hole
KS Tools 965.0513 Titan Plus angled pin wrench for internal hex screws, 7/16 inch
Titanium Hex Key Allen WrenchWeight: 108 gLength 1: 125 mm, Length 2: 45 mmWrench Size: 7/16"DIN/ISO: DINISO2936Suitable for imperial thread screwsNon-magnetic, rustproof, and acid-resistant
KS Tools 150.1669 Injection Test Probe
isolated injection test probeenables measurement on cables without strippingsuitable for piercing cables up to 4.0 mm diameterwith 4.0 mm input jackapplicable up to max. 24V (10A)total length: 170.0 mmpower source: manual operation
KS Tools 117.1294 Classic 1000 V Insulated Bent Flat Nose Pliers, 160 mm
Flat-nose pliers made of special tool steelCurved jaws for soft and medium-hard wireInductively hardened precision cutting edgesMatte chrome-plated finishLength: 160 mmWeight: 170 gHandle material: dip-insulated
KS Tools 900.2284 Chain Stripping Head with Smooth Chain, ø 45 mm, 3 Chains, 22 mm Spiral
Chain flail head with smooth chain3 chains with diameters of 45 mm and 22 mmOperating range from 60.0 mm to 125.0 mmWeight of 530 gOverall length of 160.0 mmSuitable for cleaning greasy and encrusted pipesMade from special tool steel
KS Tools 516.1415 1/4 Inch Ergotorque Precision Torque Wrench Set 1-25 Nm, 35-piece
32-Piece Ratchet Torque Wrench SetMeasuring Range: 5-25 NmSquare Drive Size (inch): 1/4''Display Type: Scale (mechanical)Includes Torque Wrench with Rotary Knob Reversible Ratchet HeadUniversal Set ConfigurationWeight: 4.73 kg
KS Tools 117.1655 Insulated Rubber Cover Sheet, 1000 mm
Insulated Rubber Cover Sheet from KS ToolsWidth: 1000 mm, Length: 1000 mmHighly tearand puncture-resistantEspecially suitable for outdoor applicationsProtects against electrical hazards
KS Tools 620.3001 Universal Puller 2-arm, 20-150 mm
Universal puller with 2 armsClamping range from 20 to 150 mmHooks usable on both sidesMade from special steelIdeal for various applications
KS TOOLS aluminum profile spirit level with fine adjustment, 600mm (204.5610)
Fasteners in Craftsmanship and IndustrySpecial Tool Steel, Nickel-PlatedSuitable for Manual Operation and Electric Screwdrivers
KS Tools 330.4091 HSS TiN Twist Drill, 9.1 mm, pack of 10
HSS TiN twist drill bit, pack of 10, diameter 9.1 mmDIN 338 type N, right-hand cuttingConical body grinding as tip grind, cross grinding as tip shaping130° point angle, 20 30° helix angleHigh-performance steel with TiN-coated surfaceIdeal for use in steel, alloyed and non-alloyed cast steel up to 900 N/mm² strength, bronze, brass, short-chipping aluminum alloys, graphite, nickel silver, sintered iron, gray, temper, malleable, and pressure die castings
KS TOOLS Socket Holder for 1/2" Sockets, 13 Holes (860.0895)
Suitable for hole size 10 x 10 mmHole spacing 38 mmIncluding locking screwBase plate thickness 1.5 mmGalvanizedSteel sheet
source: Amazon
KS Tools 515.1126 1/2 inch Hex Power Socket, long, 26 mm
Weight: 0.34 kgProfile: HexagonalWrench Size: 26 mmDepth: 27 mmOverall Length: 78 mmDiameter (D1): 38 mmDiameter (D2): 30 mmMaterial: Finest Chrome Molybdenum Steel
£26.33
KS Tools 117.1386 1/2 Inch Insulated Socket, Extra Long, 24 mm, L-255 mm
1/2'' socket with protective insulation, 6-sided, XL length 255 mmWrench size: 24 mm6-sided according to DIN 7448Dip insulation according to IEC 60900Internal square drive according to DIN 3120 / ISO 1174 with ball retention grooveMaterial: chrome vanadiumStandard: DIN 7448, DIN 3120, ISO 1174, IEC 60900
KS TOOLS 3/4" Hex Drive Impact Socket, Long, 50mm (515.1450)
3/4'' Hex Drive Impact Socket, 50 mmInternal square drive according to DIN 3120 / ISO 1174 with ball retention grooveLong versionFor machine operationPhosphatedMaterial: Chrome-MolybdenumDimensions: 6-sided internal square drive according to DIN 3121 / ISO 1174
KS Tools 330.4093 HSS TiN Twist Drill, 9.3 mm, pack of 10
HSS TiN Twist Drill Bit, pack of 10, diameter 9.3 mmDIN 338 Type NConical body grinding as tip grinding, cross grinding for point sharpening130° point angle, 20 30° helix angleTiN-coated surfaceIdeal for use in steel, alloyed and unalloyed cast steel up to 900 N/mm² strength, bronze, brass, short-chipping aluminum alloys, graphite, nickel silver, sintered iron, grey, malleable, spheroidal graphite and die castingDimensions: diameter 9.3 mm, working length 81 mm, overall length 125 mm, flute length 44 mm, shank: cylindrical shank
KS Tools 336.0651 HSS CO Hand Tap Set M in Plastic Case, 21-piece, M3-M12
Hand tap set M, 21 piecesHigh-strength hinges, right-hand cutDIN 352, tolerance according to ISO 2/6HSuitable for unalloyed and low-alloy steels up to 900 N/mm² strength, malleable cast iron, and non-ferrous metalsCobalt-alloyed high-performance steel, polished surface
KS Tools 330.3063 HSS-G Co 5 Twist Drill, 6.3 mm, Pack of 10
HSS-G CO 5 Twist Drill, pack of 10, diameter 6.3 mmDIN 338 Type NConical body grind as point grind, right-hand cuttingCross grinding as tip sharpening130° point angle, 20 30° helix angleCobalt-alloyed high-performance steel, golden-brown surface
KS Tools 117.3820 3/8 inch Insulated T-handle Socket Wrench with Screw Lock, 200 mm
Square drive according to DIN 3120 / 1174 with ball lockBased on DIN 7436Dielectric insulation according to IEC 60900With screw lockingChrome vanadiumDimensions: length 200 mm, weight 250 gMaterial: chrome vanadium steel
KS Tools 117.1375 1/2 inch Insulated Socket, Extra Long, 22 mm, L-145 mm
Socket with protective insulationLength: 145 mmMaterial: Chrome vanadium steelSquare drive: 1/2 inch
KS Tools 117.1840 Insulated Tool Case, 26 Pieces
26-piece tool set with insulated toolsDip insulation according to IEC 60900Material: special tool steelTest certificate: 1000 Volt GSInsulation: dip insulation according to DIN EN 60900Set consisting of various slotted screwdrivers
KS Tools 330.4102 HSS TiN Twist Drill, 10.2 mm, pack of 5
Twist drill bit made of HSS TiNDiameter: 10.2 mmPack of 5Right-hand cutConical flank grind as point grindCross grind as tip sharpeningHigh hot hardness resistance with TiN-coated surface
KS Tools 615.1007 Quick-Release Puller Hook, Slim Design, 150 mm, D=5 mm
Slim design, weight: 0.65 kgPuller hook width: 40 mm, puller hook total depth: 17 mmPuller hook tip height: 5 mm, puller hook tip depth: 8 mmClamping depth: 150 mm, material: special tool steelQuick adjustment includedSuitable for 2-arm and 3-arm pullersIdeal for tight spaces
KS Tools 914.0031 Vise without Swivel Base, 125 mm
Bench vice without rotary baseJaw length: 120 mmWith pipe clamping jawLength: 360 mmMaterial: special tool steelWith adjusting screw and pipe clamping jawForged connection of rear and front jawJaws shaped extra high for large clamping depths
KS Tools 330.2078 HSS-G Twist Drill, 7.8 mm, pack of 10
Content: 10 piecesWeight: 0.33 kgDiameter: 7.8 mmTotal length: 117 mmTension rod length: 42 mmPartial length L2: 75 mmMaterial: High-performance steel
KS Tools 162.0237 Pointed chisel, octagonal, 20 x 600 mm
DIN 7256 8-sided resharpenable tipWorking ends fully hardenedShaft gold-colored baked enamel, bright polished Chrome-MolybdenumWeight: 1.48 kgTotal length: 600 mmShaft diameter: 20 mmMaterial: Finest Chrome Molybdenum steel
KS Tools 518.0643 Combination Wrench Set 13-piece
13-piece combination wrench setFlankTraction profile DIN 3113 / ISO 3318 / ISO 7738Open-end angled 15°, ring angled 15°High-gloss chrome-plated chrome vanadiumPackage weight: 3.527 lb
£51.84
KS TOOLS HSS Sheet Metal Countersink, Ø 5-22.5mm (336.0009)
Point geometry according to DIN 1412 CRight-hand cross cutTip angle of 118°Taper angle of 20-30°Absolute runout accuracyHigh cutting performancePolished surfaceDimensions: Length 2: 59 mm, Diameter 1: 22.5 mm, Diameter 2: 5 mm, Shank diameter: 8 mm, Diameter from: 5 mm, Diameter to: 22.5 mm, Weight: 90 g, Length 1: 79 mm
KS Tools 330.3087 HSS-G Co 5 Twist Drill, 8.7 mm, Pack of 10
HSS-G CO 5 Twist Drill Bits, pack of 10, diameter 8.7 mmDIN 338 Type NRight-hand cutting, tapered shank grind as point grindCross grind as tip shape130° point angle, 20 30° helix angleCobalt-alloyed high-performance steel, golden brown surfaceIdeal for unalloyed and alloyed steels up to 1100 N/mm² tensile strength, quenched and tempered steels, case-hardening steels, stainless and acid-resistant steels, hotand cold-work steels
KS Tools 330.7085 HSS-G Twist Drill, 8.5 mm, pack of 10
HSS-G Spiral Drill Bit, Long, Pack of 10Diameter: 8.5 mmDIN 340 Type NRight-hand Cutting Tapered Shank with Point Tip Grind118° Point Angle, 20 30° Helix AngleHigh Runout AccuracyHigh-Performance Steel, Plain SurfaceIdeal for Steel, Cast Steel up to approx. 900 N/mm² Strength, Bronze, Brass, Short-Chip Aluminum Alloys, Graphite, Nickel Silver, Sintered Iron, Gray, Tempered, Spheroidal, and Die Castings
KS TOOLS TELESCOPIC SET TK 1000, 2-piece Mirror MR02 + Magnet 5 kg MG01
Telescopic Set KS 1000, 2-pieceExtendable Telescopic FunctionTelescopic Magnet up to 1.5 kgEnergy Protection Cap increases magnet strength by 35%Telescopic Inspection Mirror 45.0 x 63.0 mmLength 178.0 860.0 mm
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
