Sorry, nothing was found. Please change your selection and try again.
Showing 41 - 80 of 90 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Position switch Ls-S11s 1s1o Kuppe
Position switch with plungerDimensions: Width 31 mm, Height 61 mm, Length 33.5 mmRated operational current: AC-15 6 A, DC-13 3 ASwitch function: snap-action contact, forced opening presentPlastic housing, protection rating IP66/IP67Connection type: screw terminalSuitable for safety functions
Emergency stop key switch M22-Pvs, D77496, Moeller, 216879
Emergency Stop Switch by EatonType: M22-PVSRound lens with a diameter of 38 mmProtection rating: IP67/IP69K, NEMA 4X, 13Mushroom shape with key releaseSuitable for Emergency Stop
Position switch Ls-11s/L 1s1ö Roll
Roll Lever LS-11S/L from EatonPosition switch with safety functionSensor width: 31 mmSensor height: 61 mmSensor length: 33.5 mmRated operational current Ie at AC-15, 24 V: 6 ARated operational current Ie at DC-13, 24 V: 3 A
Position switch Ls-S11/Rl 1NO Sch, D72209, Moeller, 106789
Position switch with a switching voltage of 400 V/AC and a maximum switching current of 4 AActuation type: roller leverContact type: 1 normally closed, 1 normally openMaterial: plasticDimensions: width 31 mm, height 76 mm, depth 33.5 mmProtection rating: IP67Suitable for LS-S11/RL typeCage-Clamp is a registered trademark of Wago Kontakttechnik
Moeller Auxiliary Contactor DILER-22(230V50HZ)
Eaton Electric DILER-22 Auxiliary ContactorOperating voltage: 230 V 50 Hz, 240 V 60 Hz2 Normally Closed + 2 Normally Open contactsSuitable for control circuitsMaterial: Plastic
Position switch Ls-S11s/S 1s1o spring
Position switch LS-S11S/S from Eaton ElectricSpring rod set, fully assembledIP66/IP67 protection ratingAmbient temperature from -25 to +70 °CSnap-action contact includedContact configuration: 1 normally closed, 1 normally openPlastic housing, yellow housing coverRod length: 126 mm, connection type: screw terminal
Moeller Motor Protection Relay ZB12-12
Motor protection relay ZB12-12 by EATORated current from 9 12 A1 normally closed + 1 normally open contactSuitable for motor protection1 piece includedEATO Motor protection relay ZB12-12 (278441)Product by Eaton
MOELLER AE/I43E Circuit Breaker Enclosure
Control cabinet by EatonMaterial: polycarbonateDimensions: 375 x 250Metric knockouts on all side wallsTransparent lid with handle locksDoor for operating installed devices
Moeller Circuit Breaker FAZ-C25/3
Circuit Breaker FAZ-C25/33-pole, trip characteristic: CRated current In: 25 ASwitching devices for electrical installations
MOELLER PN1-125 Load Break Switch 3p
Load Disconnector PN1-125Meets disconnection requirements for grounded IT networksStandard/Approval: IECInstallation type: Flush-mountedSize: PN1Number of poles: 3-poleRated current = Rated continuous current: 125A
Moeller Contactor DILM17-01(230V50HZ)
Eaton Contactor DILM17-01(230V50HZ)3-pole, 1 Normally Closed ContactRated Control Supply Voltage: 230V AC @ 50Hz, 240V AC @ 60HzRated Operating Current AC-3, 400V: 18ARated Operating Power AC-3, 400V: 7.5kWMain Circuit Connection Type: Screw TerminalSuitable for Motors up to 170A
Moeller Thermistor Protection EMT6(230V)
Thermistor machine protection relay with power and fault LED indicatorsRated control supply voltage: 230V 50-60HzWithout automatic restart lockoutSnap-in mounting
Moeller Contactor DILEM-10(24V50HZ)
Eaton Electric DILEM-10(24V50HZ) Contactor24 V 50 Hz, 3-pole, 380 V 40Application: Mini contactor for motors and resistive loadsUtilization category: AC-1, AC-3, AC-4Connection technology: Screw terminalsWith auxiliary switch, poles: 3-poleRated operational current AC-3 380 V 400 V: Ie=9 AMax. rated operational power three-phase motors AC-3 220 V 230 V: P=2.2 kW, 380 V 400 V: P=4 kW, 660 V 690 V: P=4 kW
Moeller Contactor DILM17-10(230V50/60Hz)
Contactor for motors up to 170 A3-poleSuitable for power up to 7.5 kWOperating voltage of 230 V (50/60 Hz)3 normally open contacts1 piece included
MOELLER DILM9-10 (24VDC) Contactor
Eaton Electric Contactor DILM9-10(24VDC)Contactor for motors up to 170 AUtilization category: AC-1 and AC-3Voltage: 380 V 400 VPower: 4 kWNumber of poles: 3Suitable for household appliances and small devices
MOELLER XC CSAU 01/02 - Xcomfort Radio Switch Actuator Single Channel, Potential-Free, CSAU-01/02
Eaton Xcomfort Potential-Free Radio UP ActuatorOutputs: 1Power Supply: 230VAC / 50HzFrequency: 868.300MHzOperating Temperature: -5 to +45°CProtection Class: IP20Load: 8ADimensions: HxWxD: 48.6x45.3x26.2mm
MOELLER EASY 620-DC-TE - Control Relay Extension EASY 620-DC-TE
Moeller SI. SWITCH LS-S02-24DFT-ZBZ/X SPRING CLAMP
Eaton safety switchType: LS-S02-24DFT-ZBZ/XWidth: 60 mm, Height: 173 mm, Length: 39 mmRated operational current at AC-15, 24 V: 6 ARated operational current at AC-15, 125 V: 6 APosition switch with interlock monitoringSuitable for household appliances and small devices
Position switch Ls-11/F 1NO knob, D72117, Moeller, 290176
Position switch with 1 normally closed and 1 normally open contactDome plungerModel: LS-11/F 1S (290176)
Moeller Auxiliary Contactor DILA-22(230V50HZ)
Auxiliary contactor DILA-22 by Eaton4-pole, 2 NO/2 NCCoil voltage: 230V @ 50 Hz, 240V @ 60 HzRated contact current: 4 AConnection type: screw terminalDimensions: length 45 mm, width 68 mmMaximum operating temperature: +60°C
Moeller Motor Protection Relay ZE-0.6
Motor protection relay for small contactorsTest/Off button, reset button Hand/AutoDirect mounting method1 normally closed auxiliary contact, 1 normally open auxiliary contactCompatible with DILEM, DIULEM/21/MVProtection rating: IP20
Moeller Motor Protection Relay ZE-9
Motor protection relay ZE-9 for small contactorsTest/Off button, reset button Hand/Auto, free releaseMounting type: direct mountingAuxiliary switch: 1 normally closed, 1 normally openCompatible with DILEM, DIULEM/21/MVDegree of protection: IP20Full Load Current motor rating: 6-9 AControl voltage: 600 VacRated contact current: 9 ARated contact voltage: 690 Vac
Position switch Ls-S11s/Rla 1s1ö V
Eaton position switch 1S1O LS-S11S/RLASensor width: 31 mm, height: 61 mm, length: 33.5 mmRated operational current Ie for AC-15: 6 A (24 V, 125 V, 230 V)Rated operational current Ie for DC-13: 3 A (24 V), 0.8 A (125 V), 0.3 A (230 V)Switch function: snap-action contact, forced opening: yesNumber of safety-related auxiliary contacts: 1Enclosure design: cuboid, material: plasticAmbient temperature during operation: -25..70 °C
Moeller Circuit Breaker NZMB1-A40
Circuit breaker NZM1, 3-poleBreaking capacity 400/415 V 50 Hz: 25 kARated current: 40 AInstallation type: Flush mounting, frame terminalStandard/Approval: IECProtection function: System and cable protectionAdjustable range (current): 32 40 A
Moeller Circuit Breaker FAZ-C2/1
Circuit breaker FAZ-C2/1 by EatonRated current: 2 ARated voltage: 230 VRated insulation voltage Ui: 440 VRated impulse withstand voltage Uimp: 4 kVRated breaking capacity Icn according to EN 60898 at 230 V: 10 kARated breaking capacity Icn according to EN 60898 at 400 V: 10 kA
Moeller Load Disconnect Switch PN3-400
Load Break Switch PN3-400 by Eaton Electric3-pole with a capacity of 400ASuitable for grounded IT networksAccessories such as bridging kits and terminal blocks availableCustom installation possible in various distribution systems
Moeller Circuit Breaker NZMB2-A200
Eaton circuit breaker NZMB2-A2003-pole, 200ARated voltage: 440VBreaking capacity: 25kAInstallation type: Fixed mounting, screw connectionStandard/Approval: IECProtection function: System and cable protection
Moeller Small Enclosure CI-K3-125-TS
Small enclosure CI-K3-125-TS from Eaton ElectricInsulating enclosure made of glass fiber reinforced polycarbonateWith mounting rail according to IEC/EN 60715Protection class IP65Dimensions: Width 120 mm, Height 125 mm, Depth 222 mmSuitable for emergency stop
Moeller Cam Switch P1-32/I2 On-Off
ON-OFF switch type P1 with black rotary knob and front panelAuxiliary switch contact or neutral conductor retrofittable3-pole, protection class IP65, surface-mounted designRated operational power AC-23A 50-60 Hz 400 V: 15 kWRated continuous current: 32 ALoad disconnect switch according to IEC/EN 60947-3Eaton P1-32/I2 cam switch, 32A, 1 x 90°, gray, black, 1 piece
Position switch Ls-S11/Ls 1s1ö Rol, D72115, Moeller, 106787
Position switch with basic functionSafety position switchType identifier: LS (M) -.1 normally closed + 1 normally openShort roller leverMaterial: plasticNote: Cage-Clamp is a registered trademark of Wago Kontakttechnik.
Moeller Contactor DILM9-10(230V50/60HZ)
Contactor for motors with a power of 4 kW3-pole, suitable for utilization category up to 170 AOperating voltage from 380 V to 400 VApplication: Household appliances, small household devices, othersEATO contactor model DILM9-10(230V50/60HZ)Operating voltage: 230 V, frequency: 50/60 Hz
MOELLER MOELLER T0 2 1/V/SVB MAIN SWITCH
Eaton T0-2-1/V/SVB Cam SwitchLockable in 0 PositionProtection Rating: Front IP65Switching Angle: 90°Rated Operational Power AC-23A 400V: P = 5.5 kWRated Thermal Current: Iu = 20 A
MOELLER Emergency Stop Button M22-PVS/K01
Emergency stop key switch with 1 normally closed contactProtection rating IP66, IP67, IP69KDiameter: 38 mmKey releaseTamper-proof according to ISO 13850/EN 418Maximum configuration: 4 x M22-(C)K01, 10 or 2 x M22-(C)K02, 20
Moeller Auxiliary Contactor DILER-40(24V50HZ)
Eaton Auxiliary Contactor DILER-40(24V50HZ)Auxiliary Contactor AC 4SRated Control Supply Voltage Us at AC 50 Hz: 24 VRated Operational Current Ie, 400 V: 3 AConnection Type: Screw TerminalsContact Configuration S=Normally Open: 4 SOperating Voltage: 24 V 50 Hz
Moeller Contactor DILM25-10(230V50HZ)
Eaton Contactor DILM25-10 (230V 50Hz)3-pole, 11 kW, 400 VRated control supply voltage: 230 V (AC 50 Hz)Rated operating current AC-1, 400 V: 45 AMain circuit connection type: Screw connectionDimensions: Length 85 mm, Width 56 mmDirect arrangement of AC and DC contactors possible
Moeller Main Switch T5B-4-15682/I4/SVB
Eaton Main Switch T5B-4-15682/I4/SVBCam Switch with 63A and 690VYellow and Red1 piecePanel Mount, 4 ModulesSuitable for Household Appliances
Moeller Rotary Switch T0-3-8401/I1
Eaton T0-3-8401/I1 Cam Switch20A, 2 x 60°Surface-mounted, 3 modular unitsSwitching angle: 60°Rated operational power AC-23A 50-60 Hz 400V: P = 5.5 kWRated operational current: Iu = 20A
Moeller Motor Protection Relay ZB12-2.4
Motor protection relay for current range 1.6-2.4AAdjustable current range: 1.6-2.4AMax. rated operating voltage: 690VMounting type: direct mountMain circuit connection type: screw connectionTripping class: CLASS 10 AReset function automatic and manual via button
£22.99
MOELLER DILM12-10 (24VDC) Contactor
Contactor for motors up to 170 ASuitable for non-inductive or weakly inductive loads, resistance furnaces, and squirrel-cage motors3-poleRated operational current AC-3: 380 V 400 V: Ie= 12 ARated operational power for three-phase motors AC-3: 220 V 230 V: P= 3.5 kW, 380 V 400 V: P= 5.5 kW, 660 V 690 V: P= 6.5 kWConnection technology: screw terminalsSuitable for motors of efficiency class IE3
Moeller double push button M22-DDL-GR #216509
Eaton Electric double-press buttonRMQ-Titan design with push buttons and indicator lightsConnection type: screw connectionButton plate in green and red, labeledProtection rating: IP66, front ring made of titaniumContact configuration: 1 normally open, 1 normally closedFront dimensions: 29.7 x 54.7 mm
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
