Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 40 of 94 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Moeller Contactor DILEM-10(230V50HZ)
Eaton Contactor DILEM-10Operating voltage: 230V 50Hz, 240V 60HzSuitable for motors up to 4 kWCompact dimensions for tight installation spaces
Moeller Key Switch M22-WRS3
Key switch from the RMQ-Titan rangeSingle device, not suitable for locking systemsConnection to SmartWire-DT possibleWith RMQ-SWD wiringLatching / momentary function
Moeller Main Switch T0-1-8200/I1/SVB
Maintenance switch for floor mountingLockable, can be secured in the 0 positionSTOP function with red rotary handle and yellow locking ringProtection rating IP65Rated operational power AC-23A 50-60 Hz 400V: P = 5.5 kWRated continuous current: Iu = 20 A
Moeller Rotary Switch T0-3-8401/I1
Eaton T0-3-8401/I1 Cam Switch20A, 2 x 60°Surface-mounted, 3 modular unitsSwitching angle: 60°Rated operational power AC-23A 50-60 Hz 400V: P = 5.5 kWRated operational current: Iu = 20A
MOELLER MOELLER T0 2 1/V/SVB MAIN SWITCH
Eaton T0-2-1/V/SVB Cam SwitchLockable in 0 PositionProtection Rating: Front IP65Switching Angle: 90°Rated Operational Power AC-23A 400V: P = 5.5 kWRated Thermal Current: Iu = 20 A
Moeller Main Switch T5B-4-15682/I4/SVB
Eaton Main Switch T5B-4-15682/I4/SVBCam Switch with 63A and 690VYellow and Red1 piecePanel Mount, 4 ModulesSuitable for Household Appliances
Moeller Motor Protection Relay ZB12-10
Motor Protection Relay ZB12-10 by EatonAdjustable Current Range: 6..10 AMax. Rated Operating Voltage Ue: 690 VMounting Type: Direct MountingMain Circuit Connection Type: Screw TerminalNumber of Auxiliary Contacts as Normally Open: 1Number of Auxiliary Contacts as Normally Closed: 1
Moeller Selector Switch M22-WRK 4 with Knob, 4 Position, Resettable
Eaton selector switch with toggle handle4 switching positions, detentSuitable for lighting: noMaterial: plasticProtection rating (IP): IP66Dimensions: front dimension 29.7 mm
Position switch Ls-S11/Rla 1s1o Ve
Position switch, type identifier: LS(M)-Protection rating: IP66, IP67Contact configuration S = Normally closed: 1 S, Contact configuration Ö = Normally open: 1 ÖMaterial: PlasticDimensions: Width 31 mm, Height 61 mm, Length 33.5 mm, Depth 33.5 mmSwitching voltage: 400 V, Maximum switching current: 6 ATemperature (max.): +70 °C, Temperature (min.): -25 °C
Position switch Ls-11/F 1NO knob, D72117, Moeller, 290176
Position switch with 1 normally closed and 1 normally open contactDome plungerModel: LS-11/F 1S (290176)
Moeller Auxiliary Contactor DILER-22(230V50HZ)
Eaton Electric DILER-22 Auxiliary ContactorOperating voltage: 230 V 50 Hz, 240 V 60 Hz2 Normally Closed + 2 Normally Open contactsSuitable for control circuitsMaterial: Plastic
Moeller Auxiliary Contactor DILA-22(230V50HZ)
Auxiliary contactor DILA-22 by Eaton4-pole, 2 NO/2 NCCoil voltage: 230V @ 50 Hz, 240V @ 60 HzRated contact current: 4 AConnection type: screw terminalDimensions: length 45 mm, width 68 mmMaximum operating temperature: +60°C
Position switch Ls-S02 2-pole Kuppenst
Position switch with plunger actuatorProtection rating IP66, IP67Ambient temperature: -25 to +70 °CContact configuration: 2 normally closed contactsSafety function with forced opening according to IEC/EN 60947-5-1Plastic housing, yellow housing coverConnection type: screw terminalStandards and regulations: IEC/EN 60947
Position switch Ls-S11s 1s1o Kuppe
Position switch with plungerDimensions: Width 31 mm, Height 61 mm, Length 33.5 mmRated operational current: AC-15 6 A, DC-13 3 ASwitch function: snap-action contact, forced opening presentPlastic housing, protection rating IP66/IP67Connection type: screw terminalSuitable for safety functions
Position switch Ls-S11/Ls 1s1ö Rol, D72115, Moeller, 106787
Position switch with basic functionSafety position switchType identifier: LS (M) -.1 normally closed + 1 normally openShort roller leverMaterial: plasticNote: Cage-Clamp is a registered trademark of Wago Kontakttechnik.
Position switch Ls-S11s/Rla 1s1ö V
Eaton position switch 1S1O LS-S11S/RLASensor width: 31 mm, height: 61 mm, length: 33.5 mmRated operational current Ie for AC-15: 6 A (24 V, 125 V, 230 V)Rated operational current Ie for DC-13: 3 A (24 V), 0.8 A (125 V), 0.3 A (230 V)Switch function: snap-action contact, forced opening: yesNumber of safety-related auxiliary contacts: 1Enclosure design: cuboid, material: plasticAmbient temperature during operation: -25..70 °C
Position switch Ls-S11/Rl 1NO Sch, D72209, Moeller, 106789
Position switch with a switching voltage of 400 V/AC and a maximum switching current of 4 AActuation type: roller leverContact type: 1 normally closed, 1 normally openMaterial: plasticDimensions: width 31 mm, height 76 mm, depth 33.5 mmProtection rating: IP67Suitable for LS-S11/RL typeCage-Clamp is a registered trademark of Wago Kontakttechnik
Emergency stop key switch M22-Pvs, D77496, Moeller, 216879
Emergency Stop Switch by EatonType: M22-PVSRound lens with a diameter of 38 mmProtection rating: IP67/IP69K, NEMA 4X, 13Mushroom shape with key releaseSuitable for Emergency Stop
Moeller Small Enclosure CI-K4-125-M
Eaton small enclosure CI-K4-125-M with mounting plateDimensions: Height 240 mm, Width 160 mm, Depth 125 mmMaterial: PlasticProtection rating: IP65Suitable for emergency stop (NOT-AUS)Standards and regulations: IEC/EN 60529, DIN EN 62208
Moeller Small Enclosure CI-K4-160-M
Small enclosure CI-K4-160-M by EatonMaterial: plasticDimensions: Height 240 mm, Width 160 mm, Depth 160 mmProtection rating: IP65Suitable for emergency stop (E-Stop)With mounting plateStandards and regulations: IEC/EN 60529, DIN EN 62208
MOELLER DILM7-10 (24VDC) Contactor
Contactor for motors up to 170 ASuitable for AC-1, AC-3, and AC-4 applicationsConnection technology: Screw terminalsSuitable for motors with efficiency class IE3Rated operational current AC-3 380 V 400 V: Ie = 7 AMax. rated operational power three-phase motors AC-3 380 V 400 V: P = 3 kWContact configuration: 3 normally closed
Moeller Motor Protection Relay ZE-4
Motor protection relay for direct mounting on contactor size DILE(E)MPhase failure sensitivity according to IEC/EN 60947, VDE0660 Part 102Suitable for protection of EEx-e motorsTrip class 10ASnap-on mounting, Ui 690V, protection class IP20Finger and contact protectionWidth: 45mm2.4 4 A, 1 normally open + 1 normally closed contact
£22.99
Moeller Motor Protection Relay ZE-0.6
Motor protection relay for small contactorsTest/Off button, reset button Hand/AutoDirect mounting method1 normally closed auxiliary contact, 1 normally open auxiliary contactCompatible with DILEM, DIULEM/21/MVProtection rating: IP20
Moeller Motor Protection Relay ZB12-1
Motor protection relay ZB12-1 by EatonAdjustable current range: 0.6-1 AMax. rated operational voltage: 690 VMain circuit connection type: screw connectionTripping class: CLASS 10 AReset function automatic and manual via buttonCompatible with DILM7, DILM9, DILM12, DILM15, DIULM7, DIULM9, DIULM12, SDAINLM12, SDAINLM16, SDAINLM22
£24.00
Moeller Motor Protection Relay ZE-9
Motor protection relay ZE-9 for small contactorsTest/Off button, reset button Hand/Auto, free releaseMounting type: direct mountingAuxiliary switch: 1 normally closed, 1 normally openCompatible with DILEM, DIULEM/21/MVDegree of protection: IP20Full Load Current motor rating: 6-9 AControl voltage: 600 Vac
Moeller Motor Protection Relay ZE-6
Motor Protection Relay ZE-6 by EatonAdjustable Current Range: 4-6 AMax. Rated Operating Voltage: 690 VMounting Type: Direct MountingMain Circuit Connection Type: Screw ConnectionNumber of Auxiliary Contacts as Normally Open: 1Number of Auxiliary Contacts as Normally Closed: 1
Moeller Contactor DILM25-10(230V50/60Hz)
Contactor for motors up to 170 A3-poleRated operational current AC-3 at 400 V: 25 ARated operational power at AC-3: 11 kWSuitable for motors of efficiency class IE3Connection technology: Screw terminalsSwitching elements according to EN 50012
MOELLER AE/I43E Circuit Breaker Enclosure
Control cabinet by EatonMaterial: polycarbonateDimensions: 375 x 250Metric knockouts on all side wallsTransparent lid with handle locksDoor for operating installed devices
Moeller Circuit Breaker FAZ-C16/3
Circuit breaker FAZ-C16/3 by Eaton3-pole, Trip characteristic: CRated current: 16 A, Rated voltage: 400 VRated insulation voltage Ui: 440 VRated impulse withstand voltage Uimp: 4 kVRated breaking capacity Icn according to EN 60898 at 230 V: 10 kAWidth in modular units: 3
Moeller Contactor DILM9-10(24V50HZ)
Power contactor for motors up to 170 ASuitable for AC-1, AC-3, and AC-4 applicationsConnection technology: screw terminalsRated operational current AC-3 at 380 V/400 V: 9 AMax. rated operational power for three-phase motors AC-3 at 380 V/400 V: 4 kWMax. rated operational power for three-phase motors AC-4 at 380 V/400 V: 2.5 kWCombinable with auxiliary switches DILM32-XHI.., DILA-XHI(V)..Current type: AC operation
Moeller Busbar Adapter NZM1-XAD160
Eaton Busbar Adapter NZM1-XAD160Type-tested adapter for NZM circuit breakers and N load disconnectorsCompatible with Cu flat bars 12-30x5-10, double-T and triple-T profilesRated operational current Ie=160AAdapter width=90mmRated operational voltage Ue=690VACTemperature resistant up to 120°C, self-extinguishing according to UL 94, tracking resistance CTI 200
Moeller Contactor DILM65(230V50/60HZ)
Motor contactor3-poleUtilization category: ...Eaton DILM65 (230V 50/60Hz)3 normally closed contactsPower rating of 30 kWSuitable for 400V AC (277902)
Moeller Contactor DILM17-10(230V50/60Hz)
Contactor for motors up to 170 A3-poleSuitable for power up to 7.5 kWOperating voltage of 230 V (50/60 Hz)3 normally open contacts1 piece included
Moeller Circuit Breaker NZMB1-A40
Circuit breaker NZM1, 3-poleBreaking capacity 400/415 V 50 Hz: 25 kARated current: 40 AInstallation type: Flush mounting, frame terminalStandard/Approval: IECProtection function: System and cable protectionAdjustable range (current): 32 40 A
Moeller Circuit Breaker NZMB1-A100
Eaton NZMB1-A100 Circuit BreakerRated current: 100 A, Rated voltage: 440 VBreaking capacity: 30,000 ANumber of poles: 3International Protection Rating (IP Code): IP20Width: 90 mm, Depth: 84.5 mm
Moeller Circuit Breaker NZMB2-A200
Eaton circuit breaker NZMB2-A2003-pole, 200ARated voltage: 440VBreaking capacity: 25kAInstallation type: Fixed mounting, screw connectionStandard/Approval: IECProtection function: System and cable protection
Moeller Main Switch T0-1-102/EA/SVB-SW
Main switch range: Main switch, Maintenance switch, Repair switchType identifier: T0STOP function: HALT functionLockability: lockable in the 0 positionProtection rating: Front IP65Design: Flush mountRated operational power AC-23A, 50 60 Hz 400 V: P = 5.5 kWRated current duration: Iu = 20 A
Moeller Step Switch TM-2-8231/EZ
Step switch with a power rating of 3 kWActuation type: KnobSwitching voltage: 500 VSwitching current (max.): 10 ASwitching angle: 3 x 60 °Protection rating: IP65Dimensions: Width 30 mm, Length 30 mm
Position switch Ls-S20a 2s Kuppens
Position switch with roller plungerProtection rating IP66/IP67Ambient temperature: -25 to +70 °CContact configuration: 2 NO contactsHousing made of plasticConnection type: screw terminalStandards and regulations: IEC/EN 60947
MOELLER EASY 620-DC-TE - Control Relay Extension EASY 620-DC-TE
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
