Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 40 of 114 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
source: Amazon
Alternating Current Meter Maximum Current 32A EVA12-32A Eltako 28032411
Energy consumption display with screenStandby loss only 0.5 wattsMeasures active power like an AC meterStores consumption in non-volatile memoryAccuracy corresponds to Class B under MID (1%)Inrush current of 20mADisplay divided into 3 fieldsTotal reset possible by pressing Mode and Select buttons simultaneously for 5 seconds
£67.37
source: OnBuy
Eltako Impulse Dimmer Switch EUD12NP-8..230VUC
Universal dimmer switch for lamps up to 400WAutomatic lamp detectionMinimum or maximum brightness adjustableAdjustable dimming speedWith child room and snooze functionModular device for mounting on DIN railUniversal control voltage 8..230V UC
£65.35
Impulse switch actuator FSR61/8-24V UC - Eltako
1 potential-free normally closed contact 10A/250V ACReturn delay with off-warningPush-button continuous light switchableEncrypted radio, bidirectional radio, and repeater function switchableStand-by loss only 0.3–0.8 wattsFor flush mounting, dimensions: 45mm long, 45mm wide, 33mm deepSwitching state retained in case of power failureIn addition to the radio control input, a conventional control button can also be used
Eltako Control Relay for Row Installation ER12-001-8..230V UC
1 potential-free changeover contact 16A/250V AC, 230V LED lamps up to 200W, incandescent lamps 2000WModular device for mounting on DIN-EN 60715 TH35 mounting railState-of-the-art hybrid technology combines wear-free electronic control with high performance of special relaysUniversal control voltage 8..230V UCIntegrated freewheeling/snubber diode (A1 =+, A2 =-)Use of a bistable relay, no coil power loss or heating in the switched-on state
£49.24
Time relay TGI12DX-UC - Eltako, Fellbach, 23001402
1 potential-free changeover contact 10A/250V ACSuitable for 230V LED lamps up to 200W, incandescent lamps 2000W*Standby loss of only 0.02–0.4 wattsModular device for mounting on DIN-EN 60715 TH35 mounting railsDimensions: 1 module width = 18mm wide, 58mm deepTime range: 0.1 seconds to 40 hoursUse of a bistable relay for zero coil power loss and heatingLED indicates contact status during timing
£59.24
Eltako Impulse Relay ESR12NP-230V+8..230V
Eltako Impulse Relay ESR12NP-230V+UCElectronic impulse relay with drop-out delayMounting type: DIN railWidth: 1 moduleInstallation depth: 58 mmRated switching current: 16 ADrop-out delay time setting from 2 to 120 minutes
Eltako Impulse Relay ESR61M-8..230V UC
Multifunction momentary-contact relay for flush mounting5 selectable functions: momentary-contact switch or relayContacts: 1+1 normally closedNo standby loss, no constant power supply requiredDimensions: 45mm long, 45mm wide, 32mm deepUniversal control voltage: 8-230V AC/DCState-of-the-art hybrid technology for wear-free electronic controlSuitable for incandescent lamps up to 2000W and LED lamps up to 230V
Eltako Field Disconnect Switch for Series FR12.1-230V
Field switch for row, 1 normally closed contact, 16A/250V ACRated voltage: 230V, rated current: 10A, rated frequency: 50HzMax. incandescent lamp load: 2300W, max. fluorescent lamp load: 500VAStand-by power consumption only 0.8 wattsSelf-learning field switch with state-of-the-art hybrid technologyInterrupts power supply after shutdown of downstream consumersThreshold adjustment is automatic via patented processModular device for mounting on DIN-EN 50 022 mounting rail, 1 module width = 18mm, 55mm deep
£65.56
Eltako LS - Light Sensor LS
Light sensor LS with photoresistorModifies voltage depending on brightnessEvaluation in sensor relay LRW12DDurable plastic housing, protection class IP54Mounting with screw and nutCompatible with Apple HomeKit, Google Assistant, Amazon Alexa, IFTTT not supportedDimensions: 38x28x95mm
£39.71
Eltako ES61-8..230V UC - Impulse Relay ES61-8..230V UC
Impulse switch with 1 normally closed contactPotential-free, 10A/250V ACSuitable for incandescent lamps up to 2000WNo standby lossFor flush mounting, dimensions: 45mm long, 45mm wide, 18mm deepState-of-the-art hybrid technology
£49.73
Eltako Control Relay for Row Mounting ER12-002-8..230V UC
Switching and control relay UCNo standby power lossHybrid technology for wear-free actuationActuation indicator with LEDIntegrated freewheeling/suppression diodeSuitable for 230V LED lamps up to 200W, incandescent lamps up to 2000W
£56.83
Impulse relay for flush/surface mounting S91-100-230V - Eltako, 91100030
Electromechanical impulse switch 230V1 normally closed contact 10A/250V ACFor flush and surface mountingWith manual operation and switching position indicatorDimensions: Length 50mm, Width 26mm, Depth 32mm
£29.47
Impulse relay for series S12-110-230V - Eltako, 21110030
Electromechanical impulse switch with manual operation and switching position indicatorDuty cycle 100%Control power consumption 5-6WContact gap 3mmDistance control terminals/contact greater than 6mmMounting type: DIN railWidth in modular units: 1Installation depth: 55 mm
£32.99
Eltako MFZ61NP-8..230V UC - Multifunction Timer Relay MFZ61NP-8..230V UC
Multifunction timer relay for flush mounting1 potential-free normally closed contact 10A/250V AC, incandescent lamps 2000WStandby power consumption only 0.02–0.4 wattsZero-cross contact switching to protect contacts and lampsTime settings adjustable between 0.5 seconds and one hourFunctions: RV, AV, TI, IA, EW, AWMaximum load from 5 minutes delay or pulse time
£51.04
Eltako BZR12DDX-UC Digital Adjustable Operating Hour Pulse Counter
Digitally adjustable operating hours pulse counter with alarm relay and resetStandby loss only 0.05 to 0.5 watts1 potential-free changeover contact 10A/250V ACModular device for mounting on DIN-EN 60715 TH35 DIN railFunction settings via MODE and SET buttonsDisplay of operating hours, alarm time, and pulsesKey lock and reset function included
£59.87
Eltako ES12-100-8..230V UC - Impulse Relay ES12-100-8..230V UC
Eltako ES12DX-UC impulse relay, 1 potential-free normally open contact, 16A/250V ACControl via multi-voltage input (8-230V) or 230V with max. 5mA glow lamp currentModular device for installation on DIN-EN 60715 TH35 mounting railSuitable for manual operationNo standby loss, low power consumption during control pulseDimensions: Width 18 mm, Depth 58 mm
Eltako Impulse Dimmer Switch EUD61NP-8..230VUC
Universal dimmer switch for R, L, and C loads up to 400WAutomatic lamp detection for dimmable CFL and 230V LED lampsZero-cross switching with soft on/off for lamp-friendly operationAdjustable dimming speed and minimum brightnessChildren's room mode retaining the last saved brightnessSleep mode with decreasing brightness for up to 60 minutesElectronic overload and overtemperature protectionFlush and surface-mounted installation, only 18 mm deep
Eltako 22200030 Electromechanical Switching Relay 2 Normally Closed Contacts 16A R12-200-230V
Electromechanical switching relay with manual operation and switching position indicator100% duty cycleControl power requirement of 1.9WContact gap of 3mmTest voltage contact/contact of 2000VTest voltage control terminals/contact of 4000VSuitable for flush and surface mounting
Switching relay for EB/AP R91-100-12V - Eltako, 91100411
Switching relay for flush and surface mountingManual operation and switching position indicatorDimensions: 50 mm long, 26 mm wide, 32 mm deepDuty cycle: 100%Control power consumption: 4-5 WContact gap: 2 mmSuitable as electronic impulse switch ES61-UCUniversal control voltage: 8-253V AC 50-60Hz, 10-230V DC
Eltako NLZ61NP-8..230V UC, run-on timer switch 072000236
Eltako follow-up switch flush-mounted, installation 230 V1 normally closed contact, not potential-free 10A/250VNo coil power loss and heating in the switched-on stateContact switching at zero crossing to protect contacts and consumersTime setting from 1 to 12 minutes, response delay adjustable from 0 to 12 minutes
Eltako 22400930 Installation Contactor 4 Normally Closed Contacts 25A XR12-400-230V
Modular device for mounting on DIN-EN 60715 TH35 mounting railManual operation and switching position indicator2 modular units = 36mm wide, 55mm deepDuty cycle 100%Control power consumption 4WContacts: 4 normally closed, 3 normally closed and 1 normally openTest voltage contact/contact 2000V and test voltage control terminals/contact 4000V
Eltako SBR12-230V/240µF Capacitive Current Limiting Relay
Current limiting relay with 1 normally closed contact 16A/250VACNo standby loss1 modular unitMaximum capacitive load 240 microfarads after rectifier or 120 microfarads directly on the mainsLimiting resistor 12 ohms, limiting duration approx. 15msSwitch-on current pulse of energy-saving lamps, fluorescent lamps and compact fluorescent lamps is limitedSuitable for protecting relay contacts of a switching deviceContinuous load max. 1200W, maximum switching frequency 600/h
£47.21
Impulse relay for series S12-110-24V - Eltako
Impulse switch for the seriesType: S12-110-24VMounting type: DIN railWidth: 1 moduleInstallation depth: 55 mmControl voltage: 24 V AC, 50 Hz
£36.79
Radio Repeater FRP61-230V - Eltako
1and 2-level radio repeaterStand-by loss only 0.7 wattsFor flush mounting, 45mm long, 45mm wide, 18mm deepSupply voltage 230VReception and amplification of radio signalsSwitchable 1-level and 2-level modeLED indicates incoming radio signalsNo pairing required, receives signals from all radio sensors within range
£77.38
Radio actuator heating-cooling relay FHK61-230V - Eltako
Wireless actuator heating-cooling relay 230V1 potential-free changeover contact 10A/250V ACStand-by loss only 0.8 wattsEncrypted radio, bidirectional radio and repeater function optionally switchableFor flush mounting, dimensions: 45mm long, 45mm wide, 33mm deepSwitching state retained in case of power failureEvaluation of wireless temperature controllers or sensorsUpper rotary switch for operating modes, LED indicates radio control commands
£104.10
source: OnBuy
Eltako 21100800 1-10V Control Dimmer Switch for EVG SDS12/1-10V
Control dimmer switch for EVG with 1-10V control output 40mAStandby loss of only 1 wattAdjustable minimum brightness and dimming speedChildren’s room and snooze function includedAlso suitable for controlling LED driversGalvanically isolated power supplyZero-cross switching for contact protection
£59.33
Eltako R12-400-230V Electromechanical Switching Relay
Electromechanical switching relay with manual operation and switch position indicatorDuty cycle 100%Control power consumption 4WContact gap 3mmTest voltage contact/contact 2000V and test voltage control terminals/contact 4000V4-pole 16A/250V ACModular devices for DIN-EN 60715 TH35 rail mounting with manual operationRated voltage: 230V, switching current (max.): 16A, 4 normally closed contacts, 1 piece included
Eltako FT55-wg wireless switch pure white glossy with rocker and double rocker
Wireless Push Button FT55-wg 80x80mm outer dimensions, frame inner dimensions 55x55mm, 15mm heightBatteryand wiring-free wireless technologyEncryptable wireless telegramsInstallation: screw-on or adhesiveGenerates energy for wireless telegrams itself when pressedSmart Home SensorDimensions: 80x80mm outer, frame inner dimensions 55x55mm, 15mm height
£60.08
Impulse relay S09-12V - Eltako, 29100011
Eltako Momentary Switch S09-12V1 Normally Closed Contact 16A/250V ACMounting on DIN-EN 60715 TH35 DIN RailManual operation and switching position indicatorOnly 1/2 module width = 9mm wide, 55mm deepControl power consumption 5WSuitable for pulse controlContact gap 3mm
£35.06
Time relay EAW12DX-UC - Eltako
Eltako Time Relay EAW12DX-UCAnalog Adjustable Time RelayStandby loss of only 0.02 0.4 wattsFunctions: Turn-On Wiper (EW), Turn-Off Wiper (AW), Turn-On and Turn-Off Wiper (EAW)Universal Control Voltage 8..230V UCTime range from 0.1 seconds to 40 hoursNo coil power loss and heating in the switched-on stateLED indicates contact status during the timing cycle
Separation relay ETR61NP-230V+FK - Eltako
Isolation relay with window contact1 normally closed contact, not potential-free, 10A/250V ACStand-by loss only 0.5 wattHybrid technology for wear-free activation and high performanceGalvanically isolated control input with internally generated low voltageEasy installation with L and N terminalsDimensions: 45mm long, 45mm wide, 18mm deep
£68.92
Eltako XS12-100-230V Electromechanical Impulse Relay
Electromechanical pulse switch with manual operation and switching position indicator100% duty cycleControl power requirement 5-6WContact gap 3mmModular device for DIN-EN 50 022 DIN rail mounting1 modular unit = 18mm wide, 55mm deep1 normally closed contact 25A/250V ACSuitable for household appliances
£34.64
Eltako Line Add-on LUD12
Power add-on for universal dimmer switchesPower MOSFET up to 400WStandby loss only 0.1 wattsAllows mixing of inductive and capacitive loadsMounting type: REGMaterial: plasticHalogen-free
Eltako KR09-24V UC - Coupling Relay KR09-24V UC
Potential-free contact closer 6A/250V ACSuitable for 230V LED lamps up to 50W, incandescent lamps up to 500WNo standby lossModular device for mounting on DIN-EN 60715 TH35 railState-of-the-art hybrid technology combines electronic control with high performance of special relaysControl voltages 24V DC, control indicator with LED
Eltako KR09-230V - Coupling Relay KR09-230V
Eltako Coupling Relay KR09-230V1 potential-free normally open contact 6A/250V ACNo standby lossModular devices for mounting on DIN EN 60715 TH35 mounting rails1/2 module width = 9mm wide, 55mm deepState-of-the-art hybrid technology
Eltako 21110055 Electromechanical Impulse Relay 1 NO + 1 NC 16A S12-110-24VDC
Electromechanical impulse switch with manual operationSwitch position indicator included100% duty cycleControl power consumption of 5-6WContact gap of 3mmDistance between control terminals and contact greater than 6mmSuitable for building installation and control technology
£42.85
Eltako 22200930 Installation Contactor 2 Normally Closed Contacts 25A XR12-200-230V
2-pole 25A/250V ACModular devices for mounting on DIN-EN 60715 TH35 railsManual operation and switching position indicator1 module width = 18mm wide, 55mm deepDuty cycle 100%Control power consumption 1.9WContacts 2 normally closedContact gap 3mm
£42.89
Eltako Radio Switch Staircase Light NLS FTN61NP-230V
1 normally closed contact, not potential-free, 10A/250V ACSuitable for 230V LED lamps up to 400W and incandescent lamps up to 2000WReturn delay with switch-off warning and switchable push-button continuous lightEncrypted radio, bidirectional radio, and repeater function switchableStand-by loss only 0.8 wattsFor flush mounting, dimensions: 45mm long, 45mm wide, 33mm deepContact switching at zero crossing to protect contacts and consumers
Eltako XS12-200-230V Electromechanical Impulse Relay
Modular device for mounting on DIN-EN 50 022 top-hat railManual operation and switching position indicatorControl power requirement only 5-6 W1 module width = 18 mm, depth 55 mmDuty cycle 100%Contact gap 3 mmElectromechanical latching relay XS12-200-230VSuitable for rooms up to 12 m²
£41.48
Outdoor Radio Repeater FARP60-230V - Eltako, Fellbach 30000353
Outdoor wireless repeater with 1and 2-level functionDimensions: 60mm x 46mm x 30mmStandby power consumption of only 0.7 wattsReception and amplification of radio signalsSwitchable to 2-level modeWaterproof power connection with M12 screw fittingOperating temperature range from -20°C to +55°C
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
