Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 40 of 77 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
ZEUS Angle screwdriver set 9-piece 950 PKL/9BM N Wera 1 piece
Profiled and frame-chromed hex keysHigh corrosion resistanceHex-Plus advantage for larger contact surfaces and prevention of rounded screw headsLaser-engraved size markings on the hex keysTwo-component tool clip with slide switch for easy opening and closingWear-free clip material for permanently secure hold and easy removal of the hex keysAbrasion-resistant size markings for quick access
£18.59
ZEUS Retaining Screwdriver Set 6pcs Torx Wera 1 piece
Screwdriver for TORX® screwsWith locking function for safe workingMulti-component Kraftform handle for fast and ergonomic screwingWith handle marking for easier tool identification and sortingWith hexagon anti-roll protection to prevent rolling away6-piece screwdriver set for TORX® screwsMaterial: nicromatt
£30.98
ZEUS SPS SeKo VG zn-yellow 4.5x60 HP SPAX 500 pieces
Universally applicable SPAX universal screwsExclusive YELLOX surface for enhanced corrosion protectionMULTI countersunk head for flush sinking and comfortable handlingNo pre-drilling required (wood-dependent)4CUT technology reduces splitting and facilitates penetration into the woodDimensions: 4.5 x 60/54-Z, packaging unit = S (500 pieces)
ZEUS SPS SeKo TG zn-yellow 4.0x35/22 HP SPAX 1000 pieces
Chipboard screw with SPAX® MULTI head and SPAX® 4CUT tipMaterial: zinc-plated, yellow passivated A2LYELLOX surface for increased corrosion protectionCountersunk head for flush countersinking and comfortable handlingNo pre-drilling needed, easier penetration thanks to 4CUTSPAX thread profile for easier cutting through wood fibersBuilding authority approved for load-bearing wooden constructionsDimensions: 4 x 35/22-Z, Packaging unit = S (1000 pieces)
ZEUS SPS SeKo TG zn-yellow 3.5x45/30 HP SPAX 1000 pieces
SPAX universal screws with pointYELLOX coating for enhanced corrosion resistanceMULTI countersunk head for flush countersinkingNo pre-drilling required4CUT point reduces splitting effectBuilding authority approved for load-bearing timber constructions
ZEUS chipboard screw countersunk head full thread zinc yellow 3.5x35
SPAX universal screws with YELLOX coatingEnhanced corrosion protection without Chromium (VI)MULTI countersunk head for flush countersinkingNo pre-drilling required4CUT tip for easier penetration and reduced splittingBuilding authority approved for load-bearing timber structuresPackaging unit: 200 pieces, dimensions: 3.5 x 35 mm
£7.40
ZEUS SPS SeKo TG zn-yellow 4.5x50/30 HP SPAX 500 pieces
SPAX universal screws with pointDimensions: 4.5 x 50/32 mmPackaging unit: 500 piecesSurface: YELLOXCountersunk head with milling ribs and PZ drivePartial threadZinc plated, yellow passivated A2LWith MULTI-head, 4CUT point and wave thread
ZEUS Bit 1/4" DIN 3126 C 6.3 T15x25mm stainless Wera 1 piece
Bits for internal TORX® screws T8 to T40Made of stainless steel, prevents external rustSuitable for craft and industrial useVacuum ice-hardened for high hardnessNot compatible with TORX PLUS® toolsWith torsion zone1/4 Rapidaptor stainless bit holder sold separately
ZEUS plastic sheathed cable NYM-J 3x1.5 mm² 50m coil
Wet-room cable NYM-J 3x1.5mm, 50m coil, gray3 cores each with a nominal cross-section of 1.5 mm²Approximate cable outer diameter of 8 mmSuitable for dry and damp environments, flush-mounted and in concreteNot suitable for direct burial in the groundNominal voltage of 300V (U0) between conductor and sheath, 500V (U) between external conductors in three-phase currentMaximum permissible conductor temperature of 70°CIdeal for sockets and devices with protective conductors
ZEUS SPS SeKo VG zn-yellow 4.0x16 HP SPAX 1000 pieces
Universally applicable screw with YELLOX surfaceEnhanced corrosion protection and more environmentally friendly than yellow zinc platingCountersunk head for flush embedding and comfortable handlingOptimal torque transfer and precise fit with Phillips blade size Z2No pre-drilling required, easier penetration thanks to 4CUT
ZEUS SPS SeKo VG zn-yellow 3.0x16 HP SPAX 1000 pieces
Packaging unit: 1,000 piecesDimensions: 3 x 16 mmFeatures: SPAX® countersunk head, Pozidriv Z, full threadSurface: zinc-plated, yellow passivated A2LHardened, sliding coatedWith MULTI head, 4CUT tip and wave profileETA-12/0114, MPA Z-9.1-235Price per packaging unit
ZEUS SPS SeKo TG zn-yellow 5.0x60/36 HP SPAX 500 pieces
Universally applicable for indoor useSPAX-exclusive YELLOX coating for enhanced corrosion protectionMULTI-head for flush countersinking and comfortable handlingNo pre-drilling required (wood-dependent)Easier penetration and reduced splitting effect thanks to 4CUTPackaging unit: 500 pieces, dimensions: 5 x 60/37 mm
ZEUS Clamp TGK 600x120mm Bessey 1 piece
Ductile Iron Clamp TGKFixed and sliding bars made of ductile ironReinforced ductile iron barHollow profile rail with knurlingWooden handleClamping force up to 7000 NClamping width: 600 mm, throat depth: 120 mm
ZEUS SPS SeKo VG zn-yellow 4.5x40 HP SPAX 500 pieces
Wood flat head screw with bichromate finishMaterial: SteelSurface: YELLOXDimensions: 4.5 x 40/34-ZPackaging unit: 500 piecesPozidriv countersunk head and SPAX MULTI countersunk head
ZEUS SPS SeKo VG zn-yellow 3.5x20 HP SPAX 1000 pieces
Packaging unit: 1,000 piecesDimensions: 3.5 x 20 mmFeatures: SPAX® countersunk head, Pozidriv Z, full threadSurface: Zinc-plated, yellow passivated A2LApplication: UniversalMULTI-head for flush countersinking and comfortable handlingNo pre-drilling required (depending on wood) and easier penetration thanks to 4CUT tipBuilding authority approved: ETA-12/0114
ZEUS SPS SeKo TG zn-yellow 5.0x50/30 HP SPAX 500 pieces
Universally applicable for indoor useSPAX-exclusive YELLOX coating for enhanced corrosion protectionMULTI-head for flush countersinking and comfortable processingNo pre-drilling required (wood-dependent)4CUT technology for easier penetration and reduced splitting
source: Amazon
ZEUS blade for brush cutter FRS 4125
Replacement blade AL-KO for various modelsSuitable for brushcutters BC 260 B, 4125, 4535Also compatible with BC 330 MT, BC 223 BMaterial: steel, width: 25 cm, weight: 260 gSuitable for brushcuttersDimensions are approximate
£13.32
ZEUS SPS SeKo TG zn-yellow 5.0x80/46 HP SPAX 200 pieces
Countersunk head Phillips Z 4CUT partial threadYellow passivated galvanized A2LDimensions: 5 x 80/46 mmSPAX® countersunk head with milling ribs and PZ driveMULTI-head, 4CUT tip and wavy threadUniversal use for indoor applicationsYELLOX surface for enhanced corrosion protectionBuilding authority approved (ETA-12/0114)
ZEUS Ideal Scissors 260mm Left Erdi 1 Piece
Hand Shears for Straight and Contour CutsForged Scissor Head and Handle in One PieceAdjustable Industrial Screw JointPVC-Dipped HandlesSuitable for Continuous Straight and Contour CutsMaximum Sheet Thickness of 1 mmLength: 260 mm, Weight: 490 g
ZEUS Axe DIN 7294 1250g Bahco 1 piece
BAHCO Axe FGS-1.25-700Length: 700 mm, Weight: 1800 gHigh-alloy tool steelCurved ash handle with Euro holeFor felling smaller treesIdeal for DIY enthusiastsTool for various applications
ZEUS SPS SeKo TG zn-yellow 4.0x55/35 HP SPAX 500 pieces
Universal screws with pointed tip and MULTI countersunk headYELLOX coating for enhanced corrosion protectionNo pre-drilling required thanks to 4CUT technologyBuilding authority approved for load-bearing wooden structuresDimensions: 4 x 55/35-ZPackage unit=S (500 pieces)
ZEUS SPS SeKo VG zn-yellow 4.0x20 HP SPAX 1000 pieces
Universal screws with pointDimensions: 4 x 20/15-ZSurface: YELLOXPackaging unit: 1,000 piecesCountersunk head, Pozidriv Z, full threadHardened, sliding-coatedWith MULTI head, 4CUT point and wave profile
source: Amazon
ZEUS SPS SeKo VG zn-yellow 4.5x50 HP SPAX 500 pieces
Steel SPAX universal screws with YELLOX surfaceDimensions: 4.5 x 50/44-Z VE=S (500 pieces)SPAX MULTI countersunk head and Pozidriv screwdriver sizeEnhanced corrosion protection through YELLOX surfaceOptimal torque transmission with cross-slot blade size Z2
£25.58
source: Amazon
ZEUS Internal/External Deburrer 4-36 mm Rothenberger 1 piece
Internal and external pipe deburrer made of hardened special steelSuitable for copper and aluminum pipesWorking diameter range from 4-36 mmDouble-sided ground blades for internal and external deburringCompact design, fits in any trouser pocket
£13.69
ZEUS SPS SeKo VG zn-yellow 5.0x50 HP SPAX 500 pieces
Universal screw with countersunk head and Phillips drive ZFull thread for easy screwingZinc-plated and yellow passivated A2L for corrosion protection4CUT tip reduces splitting effectWave profile for fast and secure screwingMULTI head allows flush countersinkingDimensions: 5 x 50 mm
ZEUS SPS SeKo VG zn-yellow 4.0x25 HP SPAX 1000 pieces
Countersunk head, cross recess Z, full threadWIROX A3J coating for high corrosion resistanceHardened, slide-coatedWith MULTI head, 4CUT tip and wave profileUniversal screw for wood and metal connectionsYELLOX surface for increased corrosion protectionNo pre-drilling required (depending on wood)Building inspectorate approved for load-bearing timber structures (ETA-12/0114)
ZEUS Funnel Tinplate with Sieve 200mm 3.20l Pressol 1 Piece
Handcrafted metal bucket made of galvanized steel sheetHigh rim for splash protectionReplaceable brass strainerConvenient handle for easy handlingAir grooves for ventilationMatching spout pipe available (Item No. 4000 356 130)Dimensions: diameter 200 mm, capacity 3.2 l
ZEUS Hex Socket Wrench 12 mm with Handle DIN 3125
Screwdriver for external hex screwsKraftform handle for high application comfortLasertip tip for secure and comfortable screwingHex anti-roll feature prevents rolling awayScrew size and symbol embossedSocket-head screwdriver for external hex screwsRound blade made of high-alloy special steel3-component Kraftform handle with soft zones and anti-roll feature
ZEUS Clamp TG 400x175mm Bessey 1 piece
Bessey Clamp TGKFixed and Sliding Bar made of Malleable Cast IronReinforced Malleable Cast Iron BarHollow Profile Rail with SerrationsWooden HandleTrapezoidal Thread Spindle, BurnishedMovably Mounted Pressure Plate
ZEUS Bit 1/4" DIN 3126 C 6.3 T20x25mm stainless Wera 1 piece
Stainless steel bit insert for internal TORX® screws1/4" hex driveColor coding by profiles and size stampingTorsion zone for damping torque peaksSuitable for fastening stainless steel screwsApplication range: window and door construction, fittings, facades, railings, balconies, fencesVacuum ice hardening for high hardness
ZEUS Clamp TGK 500x120mm Bessey 1 piece
Clamping force up to 7,000 NReinforced design for higher clamping force and larger clamping widthsErgonomically shaped wooden handleTool-free replaceable pressure platesBessey anti-slip featureClamping range: 500 mmReach dimensions: 120 mm
ZEUS Bit 1/4" DIN 3126 C 6.3 T10x25mm stainless Wera 1 piece
Torsion zone for dampening torque peaks1/4" hex shank, compatible with holders according to DIN ISO 1173-D 6.3Application range for internal TORX® screws T8 to T40Prevention of corrosion on stainless steel screwsSuitable for window and door construction, fittings, facades, railings, balconies, fences, etc.Workshop-grade hardness achieved through vacuum cryogenic hardening
ZEUS LM folding ruler 2m x 14mm BMI 1 piece
Aluminum alloy with a thickness of 1.4 mmLink height of 14 mmBlack anodized surface with silver-colored 2 mm graduationsAbrasion-resistant and resistant to chemicals, fats, or oilsZinc-plated steel springsEU accuracy class IIDimensions: width 14 mm, number of links 10, length 2 m
£53.99
ZEUS Clamp TGK 800x120mm Bessey 1 piece
Ductile Iron Screw Clamp TGK 800/120Clamping Range: 800 mmReach Dimensions: 120 mmTool-Free Replaceable Pressure PlatesReinforced Design for Higher Clamping Force and Larger Clamping SpansErgonomically Shaped Wooden HandleClamping Force up to 7,000 NMaterial: Upper and Lower Parts Made of Ductile Iron
ZEUS Hammer Wedge SFIX Size 5.5 40mm
Made of malleable cast ironBeveled cutting edgesEnsure a secure fit of the handleSuitable for axes and hatchetsDimensions: 5.40 mmBusiness & Industry > Tools & Workshop Supplies
ZEUS Clamp OMEGA 200x100mm Bessey 1 piece
BESSEY OMEGA Clamp GMZ-2K 200/100Slide bar width: 19.5 mm, slide bar height: 9.5 mmThroat depth: 100 mm, clamping span: 200 mmFixed bar and pressure plate made from one pieceMulti-component plastic handleTool-free replaceable pressure plateClamping force up to 5,000 NUniversal application range in woodworking and metalworking
ZEUS Whiteboard CC enameled 1200 x 900mm 1 piece
Whiteboard with anodized aluminum frame and rear-mounted metal backingScratch-resistant, enameled and acid-resistant surface, magneticDimensions: 1200 x 900 mmIncludes mounting hardware and continuous marker traySuitable for office furnishingsUniversally usable organizational tool
ZEUS low-profile clamp 1000x400mm Bessey 1 piece
Low-Voltage Clamp TGNT 1000/400Clamping Range: 1000 mmReach Dimensions: 400 mmFixed and Sliding Bars made of Tempered Cast IronFull-Profile Rail with SerrationWooden HandleBrünierte Trapezoidal Thread SpindleClamping Force up to 7000 N
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
