Sorry, nothing was found. Please change your selection and try again.
Showing 121 - 160 of 714 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Gedore Universal Puller 2-arm 1.06/4-4 L/W/H: 605x120x85 8109240
Universal puller with extended, interchangeable hooksAdjustment scale allows stepless hook positioningSuitable for ball bearings, discs, and wheelsOver 17,000 tools in the range for professional use
Gedore File Blade 12'' 269 F 12 L/W/H: 360x35x5 5460380
Body File No. 269Fine Cut: 12File Blade 12"Suitable for Bodywork
Gedore H 43 TX-08 Angle Screwdriver Set in Holder 8-piece Torx
Angle screwdriver set with 8 piecesMade of chrome-vanadium steel 50CrV4, black oxide finishTORX® drive typeIn blue plastic storage holder (LDPE)KTX version with ball tipNo handle includedSuitable for TORX® screws
Gedore VDE single open-end wrench 32 mm
2-stage check tool insulationJaw opening of 15°Length: 280 mm, weight: 558 gWrench size: 32 mmErgonomic design with two-color multi-coating
source: Amazon
Gedore Handle Hole Iron 30
Version according to DIN 7200 Form ASuitable for punching cardboard, leather, rubber, and other soft materialsBlue-coated shaft for better visibilityIdeal for use in crafts and industry
£41.29
Gedore double box-end wrench 30x36 mm
Double box-end wrench made of CV steelChrome-plated surfaceDeep offset and angled at 5°With thin-walled ringsDIN 838 / ISO 3318 / ISO 1085 / ISO 10104Sizes: 30 36 mm
£38.45
Gedore Non-Rebound Soft Hammer 585
Rebound-free mallet with polyamide headsEasier work with less exertionIncreased striking force and greater impact with each hitSurface-friendly on sensitive striking surfacesReplaceable splinter-free heads made of breakand wear-resistant polyamideRobust steel hammer head filled with small steel beads
Gedore double box-end wrench open UD profile 36x41 mm
Double Box-End Wrench 36 41mm DIN 3118Made of CV steel, chrome-platedAngled, 6-sided: opening offset by 30°Unit-Drive profile: opening offset by 15°Head width 1: 58.0 mm, total width: 65 mmBox angle: 15°, net weight: 0.98 kg
Gedore VDE Insulating Standing Mat
Thickness: 4.5 mmRolled bearing prevents crackingDimensions: 1000x1000 mmIso-stand mat
source: Amazon
Gedore box wrench 304, size: 16 x 18
Starter box wrench with 16x18 mm wrench sizeChrome-plated surface for additional protectionSuitable for work in very tight spacesThin-walled rings for gentle force transmissionWrench length: 150 to 230 mmHead height: 7.0 to 10.0 mm, head width: 17.0 to 28.0 mm
£41.83
Ring Spanner DIN 3113A 36 mm Gedore
Ring wrench with UD profileVersion according to DIN 3113 Form A ISO 3318 ISO 7738Material: Chrome-Vanadium steel 31CrV3, chrome-platedRing angled 15° for gentle power transmissionOverload indicated by deformationHollow shaft for secure grip and ergonomic handling
Gedore pipe cutter niro 230311 L/B/H: 240x110x40 1154990
Pipe cutter for pipes from 4-32 mmBody made of zinc die-cast, coatedCutting wheels with high hardnessSelf-advancing feed via disc springsBlue painted, overall length 165 mmSuitable for wall thicknesses from 0.7-3.0 mm
Gedore tool module with assortment 1500 ES-7-32 L/W/H: 350x320x63 1761145
Box-End Wrench Set in 2/3 ES ModuleWeight: 2.348 kg5-pieceDelivered in 1500 ES ModulesOiland acid-resistantSlip-resistant storage in custom recess
Gedore Claw Wrench 19 mm 3114 19 L/B/H: 200x37x32 6670480
Claw wrench made of GEDORE Vanadium steel 31CrV3Matte chrome-plated with angled jawJaw thickness: 7 mm, total length: 200 mmPivot pin hole: 12 mm, wrench size: 19 mmThrough hole for operation with pivot pinFor work in hard-to-reach placesMaterial: CV steel with chrome and vanadium
Gedore Slater Hammer 75 STM L/B/H: 375x185x105 8689220
Gedore lath hammer with 600 g head weightWith magnet for easy nail pickupHandle made of sturdy steel tube with plastic gripOverall length of 322 mm and handle length of 300 mmOverall width of 170 mm and total height of 33 mmWeight of 0.835 kg
Gedore double-joint wrench UD profile 17x19 mm
Double joint wrench with 17 mm and 19 mm sizesOverall length of 315 mmMade from chrome-vanadium steel 31CrV3Extra large swivel range for flexible workingThin-walled heads with UNIT DRIVE profileHeads finely ground for precise workShaft with holes for turn pins (sold separately)
Gedore Sliding Hammer 1.35/2 L/W/H: 605x120x85 8039010
Slide hammer with a length of 520 mm and a weight of 1.7 kgSuitable for pulling small bearings in tight spacesCan be used with an internal puller and thread adapterOver 17,000 tools in the range that exceed industrial standards
Gedore Denting Anvil 104x66x25 mm 288 L/W/H: 110x65x25 6463340
Dent removal anvil made of alloy steel according to EN 10083Painted surfaceWork surfaces groundHot forged for high durabilityDimensions: 104x66x25 mm
Gedore torque screwdriver bit 3/4'' long hex 41 mm K 32 L 41 L/W/H: 90x57x57 6286890
Machine-operated, compatible with all common pneumatic and electric screwdriversInternal square drive according to DIN 3121 H 20, ISO 1174Steel, blued finish20 mm (3/4 ?)-square drive, hexagonalWith pin hole and retaining ring groove, long versionFor extreme heavy-duty use on electric and/or pneumatic impact wrenchesMaterial: special steel
Gedore Double Open-End Wrench 1 3/8x1 1/2'' 6 1 3/8x1 1/2AF L/B/H: 329x78x10 6072820
Double open-end wrench according to DIN 3110, ISO 3318, ISO 1085, ISO 10102Flat heads, glare-free, matte surfacePrecisely ground jaw for optimal contact surfacesSecure grip due to slim profile shaftOverload indicated by deformationDimensions: length 122 mm, weight 24 g
Gedore Puller Set with Sales Stand 1.04/ST L/W/H: 580x230x205 1675982
Puller set with 3 different sizesRobust die-forged designErgonomically designed bridge for stronger and safer pulling forcesAdjustment scale for consistent calibration of the puller hooksQuick adjustment for ergonomic and fast operationReplaceable spindle tip (ball or pointed)Upgradeable with hydraulic spindle (see table)
Gedore Universal Puller 2-arm 1.06/2A L/W/H: 265x230x44 8000660
Universal puller for quick and secure removal of ball bearings, discs, wheels, etc.Usable as both internal and external puller by repositioning the hooksRobust, die-forged design with 2 armsAdjustment scale on the crossbar for consistent calibration of the puller hooksClamping range from 90 to 520 mm (external), 60/140 to 185/600 mm (internal)Interchangeable hooks available for different clamping depthsUpgradeable with hydraulic spindle (see table)
GEDORE-WERKZEUGFABRIK OTTO DOWIDAT 6056030 Double Ring Spanner SW30x32mm DIN837 GEDORE ISO3318/1085
Double box-end wrench made of CV steelChrome-plated surfaceWrench sizes 30 and 32 mmFlat design with thin-walled ringsHigh fit accuracy with precisely ground wrench sizesLength: 320 mm, weight: 399 g
Gedore Locksmith Hammer 500 F-500 L/B/H: 370x135x95 8598420
Locksmith hammer with forged hammerheadFiberglass handle with plastic gripHandle features steel handle protective sleeve with head lockHead weight from 0.2 to 2 kgLength from 280 to 400 mmTotal weight from 0.36 to 2.352 kgAlmost unbreakable fiberglass handle with plastic grip and hardened handle protective sleeve
Gedore VDE diagonal cutter with immersion insulation VDE 8316-200 L/W/H: 212x70x34 6742570
High leverage for easier cuttingInductively hardened precision bladesCutting hardness 63 65 HRCMax. cutting capacity Ø 1.8 2.0 mmGEDORE special alloy steel, chrome-platedDip insulation: double Check-Tool insulationDimensions: 200 mm
Gedore Socket Wrench 16 Z 8791-11 L/W/H: 58x29x33 7710150
Socket wrench 16 T, 11 mmFor solving difficult assembly problemsEasily replaceableForged from chrome-vanadium steelMatt chrome-platedWith pin lockSuitable for difficult assembly problems
Gedore Socket Wrench 22 Z 8795-36 L/B/H: 97x74x40 7707600
Socket wrench with a 36 mm openingMade of forged chrome-vanadium steelMatte chrome-plated finishWith pin locking for easy replacementWeight: 0.43 kgPitch: 56.0 mmCountry of origin: Germany
Gedore Impact Ring Spanner 12-point 130 mm 306 130 L/W/H: 515x195x60 6477560
Special sizes available on request up to SW 250 mmUp to length 435 mm made of chrome-vanadium steel 31CrV3, from length 480 mm made of material C35Not standardizedVersion according to DIN 7444Head width 202.0 mmNet weight 12.295 kg
Gedore Sliding Hammer 1.35/3 L/B/H: 0x0x0 1958089
Slide hammer for pulling small ball bearingsCompatible with internal pullers and thread adaptersOver 17,000 tools in the range for professionalsDimensions: Length 620 mm, Weight 4200 gExternal thread connection: M10 / M14x1.5Operating hexagon: 13 / 24 mm
Gedore Hook Set 87-piece 1500 HS 23 L/W/H: 735x170x100 5804220
Hook assortment with 85 piecesSuitable for perforated sheets with square holes 10 x 38 mmNet weight: 4.958 kgCountry of origin: AustriaREACH registration available: 0
Gedore double box wrench, solid, 6-point 17x19 mm
Double-ended wrench with 17x19mm jaw widthLength: 165mmSolid construction made of CV steelChrome-plated surfaceThrough-drilled (except for item no. 4000 772 561 and 4000 772 562)Suitable for operation with a pin spanner or open-end wrenchComparable to DIN 896 Form A / ISO 2236 / ISO 1085
Gedore Torque Wrench TSN-Slipper 759-01 L/B/H: 235x70x45 7092040
Fixed-setting torque wrench from 5-25 Nm3/8" square drive with ball retentionTrigger accuracy with +/4% tolerancePrecision mechanism with clearly noticeable CLICKLightweight, stable and corrosion-resistant designCompact and non-slip rubber handleEPA compliant for electrostatically sensitive applications
Gedore double box wrench, solid, 6-point 24x26 mm
Double box wrench with a length of 195 mmSolidly made from vanadium steel 31CrV3Design similar to DIN 896, Form A, ISO 2236, ISO 1085With hexagonal shank and through holes for operation with open-end wrench or swivel pinSizes 6x7 and 8x9 without through holesHole diameter of 21.5/23.5 mm
Gedore Mobile Workbench with 8 Drawers 1504 0701 L/B/H: 0x0x0 1814931
Tool cabinet with 8 drawersOne-hand operation and safety lockLoad capacity per drawer: 40 kgLower heavy-duty drawer: 60 kgCentral locking with cylinder lockStatic load capacity: 1000 kgDimensions: H 985 x W 1100 x D 550 mmSuitable for business & industry
Gedore Reversible Ratchet with Insert Ring 46 mm UD 15 Degree 41 B 46 L/W/H: 910x95x50 6338520
Ratchet wrench with integrated 12-point UD-profile insert ringMade from vanadium steel 31CrV3Chromed surfaceLength: 910mm
Gedore Combi Step Wrench 380100 L/B/H: 89x20x19 4513040
Combination stepped wrench for radiator valves and return pipe fittings 3/8" to 1" and short tap extensionsWith cam, hexagon, and dodecagon engagement1/2" square drive, nickel-platedAvailable in 5 incrementsWeight: 135 g / 555 g
Gedore Torque Test Screwdriver SP 758-25 L/W/H: 265x75x70 7096540
Torque test screwdriver for use in the range of 0.1 5.0 NmSuitable for testing and assembly tasks in various industriesIndicating torque test screwdriver with dual scaleWith 1/4" internal hex drive for 1/4" bits according to DIN 3126 C 6.3Indication accuracy of +/6% toleranceClassification according to DIN EN ISO 6789 Type I Class DWith drift pointer function in both directions of operationLightweight design with anodized aluminum handles
Gedore Separation and Pulling Device Set 1,41/4 L/B/H: 520x465x89 8110170
Set with separation and removal deviceIncludes extensionFor diameters from 30-200mmIdeal for densely mounted/overlapping partsProtects sensitive components by using the flat surfaces of the separation deviceAdditional extensions available optionally
Gedore double box wrench, solid, 6-point 20x22 mm
Heavy-duty design with hexagonal shaftThrough-drilled (except for item no. 4000 772 561 and 4000 772 562)Carbon steel, chrome-platedLength: 175mmHead diameter 2: 30mmWrench size: 20 x 22Standard: DIN 896, Form A, ISO 2236, ISO 1085
GEDORE Impact Wrench SW36mm DIN133 GEDORE
Open-end wrench according to DIN 133Made of chrome-vanadium steel 31CrV3 (up to length 500 mm) and material C35 (from length 525 mm)For particularly heavy-duty assembliesSpecial sizes available on request (up to SW 250 mm, non-standard)Steel gray surfaceJaw angle 15°
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
