Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 20 of 20 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Dormer S9225.0 Shank Cutter
Regular length end mill with 2 flutes and 5 mm diameterCutting length of 16 mm and overall length of 50 mm45° cutting edge with 0.13 mm protective chamfer30° helix and 12° rake angle for optimal groove millingSuitable for steel, cast steel, cast iron, aluminum castings, and copper alloysShank tolerance h6 and 5 mm shank diameter
Dormer S9224.0 Shank Cutter
Shank cutter with 2 flutes and 4 mm diameterCutting length of 14 mm and overall length of 50 mm30° helix angle and 12° rake angle for precise millingSuitable for steel, cast steel, cast iron, aluminum castings, and copper alloysShank tolerance h6 and protective chamfer of 0.08 mmCorner chamfer angle 45°
Dormer S9226.0 Shank Cutter
2-flute end mill with 6 mm diameterOverall length 57 mm, cutting length 19 mmTiAlN coating for increased tool life30° helix angle for optimal millingSuitable for steel, cast steel, cast iron, aluminum castings, and copperShaft tolerance h6 for precise fit0.13 mm chamfer to protect and enhance the cutting edge
Dormer EP00TINM6 Machine Tap
Machine thread tap with right-hand cutShank Ø 6 mm, cylindrical shank with square driveISO metric thread M6 with 1.00 mm pitchThread length 15 mm, core hole Ø 5 mmDimensions according to DIN 371 standardOverall length 80 mm, usable length 30 mm
Dormer EX201 Machine Tap
UNC machine tap with right-hand spiral flutesCutting direction: rightThreads per inch: 8Shank diameter: 18 mmChamfer type C with 2-3xP thread chamferTolerance class 2B according to DIN 2184-1Cylindrical shank with square drive
Dormer E241M20 Machine Tap
Spiral point tap with partial thread form B and 3.5-5xP thread chamferISO metric thread M20 with 2.50 mm pitch and 6H tolerance classShank Ø 16 mm, cylindrical shank with square driveHSSE-PM with Super-B coatingCutting direction: right-handThread length 30 mm, core hole Ø 17.5 mmOverall length 140 mm, packaging unit 1.00 pcs
Dormer E256M8 machine tap
Machine tapDIN 371B E256 M8x1.25 HSS-E-PM TiAlN/Top-coatedStraight-fluted with peeling cutting edgeCutting direction: right-handShank Ø 8 mmHigh wear resistance due to TiAlN coatingSuitable for precise thread cutting operationsMaterial: HSS-E-PM
Dormer S9228.0 Shank Cutter
End mill with an overall length of 63 mmDiameter 8 mm and cutting length 19 mm2 flutes for efficient millingTiAlN coating for increased tool lifeHelix angle of 30° for optimal chip removalShank tolerance h6 for precise fitProtective chamfer of 0.13 mm to prevent damage
Dormer EX00TINM16 machine tap
Spiral-fluted tap with cutting form CISO metric thread M16 with 2.00 mm pitch and 6H tolerance classMade of HSS-E-PM with TiN coatingRight-hand flutes with 45° helix angleSuitable for steel, stainless steel, and aluminum castingsCylindrical shank with 12 mm diameter and 9 mm square driveDimensions according to DIN 376 standard, overall length 110 mm, thread length 20 mm
Dormer E600M12NO2 Machine Thread Tap
Bright surface prevents workpiece material from stickingStraight flute for efficient threading of through-holes and blind holesISO standard compliantSuitable for thread tapping in aluminum, steel, stainless steel, and cast ironCutting direction: right, shape: CThread length 23 mm, shank diameter 9 mm
£66.95
Dormer E5241/2NO3 Machine Tap
Hand tap with fine thread UNF 1/2" and 20 threads per inchTolerance class 2BHSS material with bright finishCutting direction: right-handSuitable for through and blind holesApplicable to structural steel, carbon steel, and copper alloysDimensions according to ISO 529 standard, shank diameter 9 mm, thread length 22 mm
Dormer B10014.5 Hand Reamer
Hand reamer with slight left-hand spiral and square driveDiameter 14.5 mm, overall length 163 mmCutting length 81 mm, tapered guide 20 mmMeets DIN 206 standard for H7 toleranceHSS with bright flame-hardened surfaceSuitable for carbon steel, cast iron, aluminum, and copper alloysRight-hand cutting direction, 8 flutes
Dormer E474M12 Machine Tap
Spiral-fluted tap with chamfer type CISO metric thread M12 with 1.75 mm pitchTolerance class 6HShank diameter 9 mm, square drive 7 mmMaterial: HSSE-PM with Super-B coatingHelix angle of 35°Thread length 23 mm
Dormer HSS B10021.0 Hand Reamer
Hand reamer with a diameter of 21 mmOverall length of 201 mmCutting length of 100 mmTapered guide of 25 mmHSS cutting material with bright steam-hardened surfaceSuitable for precise holes within H7 toleranceRight-hand cutting direction, 8 cutting edges
Dormer E513M30X2.0NO3 machine tap
Right-hand cutting machine tapISO metric fine thread M30 with 2.00 mm pitchShank diameter of 20 mm, cylindrical shank with square endThread length of 41 mm, core hole diameter 28 mmHSS material with uncoated surfaceDimensions according to ISO 529 standardOverall length of 138 mm, 4 flutes, drill depth 1.5 mm
source: Amazon
Dormer E5473/4NO1 Machine Tap
Machine tap with straight flutesCutting direction: RightThread lead-in: 6-8xPThread length: 28 mmShank diameter: 20 mmSquare drive: 16 mmMaterial: HSS, plain surface
£64.49
Dormer E003M20 Machine Tap
Spiral-fluted tap with chamfer type CISO metric thread M20 with 2.50 mm pitch and 6H tolerance classShank Ø 14 mm, square drive 11.2 mmThread length 29 mm, overall length 112 mmHSSE-PM material with vaporized surfaceRight-hand spiral flutes with 45° helix angleSuitable for blind hole threads in general-purpose applications
source: Amazon
Dormer E5475/8NO1 Machine Tap
Machine threading tap made of high-speed steelCutting direction: rightStraight flute for threads in through and blind holesSuitable for CNC machinesShank diameter of 18 mmThread lead 6-8xP, G 5/8" with 14 threads per inchDimensions according to ISO 2284 standard
£68.77
Dormer EX00TINM14 Machine Tap
Spiral-fluted tap with chamfer type CISO metric thread M14 with 2.00 mm pitch and 6H tolerance classShank Ø 11.0 mm and square drive 9.0 mmMade from HSSE-PM with TiN coatingCutting direction: right-hand, 3 flutesSuitable for steel, stainless steel, and aluminum castingsDimensions according to DIN 376 standard, overall length 110 mm
Dormer EX10TINM18X1.5 Machine Thread Tap
Spiral-fluted tap with chamfer form CISO metric fine thread M18 with 1.50 mm pitchTolerance class 6H, thread length 17 mmShank diameter 14 mm, square drive 11 mmTiN coating and 45° helix angleSuitable for structural steel, carbon steel, stainless steel, and aluminum castingsManufactured according to DIN 374 standard
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
