Sorry, nothing was found. Please change your selection and try again.
Showing 281 - 320 of 378 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low

Hazet Stud Extractor Stud Diameter 7
Stud extractor for thread-friendly installation and removalSuitable for studs and threaded pins with rightor left-hand threadsInternal square (Robertson) drive 12.5 mm = 1/2" or wrench size 21 mmFinish: chrome-plated, polishedOverall length: 65 mmDrive: hollow square 12.5 mm (1/2 inch)

source: Amazon
HAZET Power Socket Insert (6pt), size 30, 20 mm (3/4") Internal Square 1000S-30
Impact socket insert for machine screwdriversInternal square drive 20 (3/4 inch)Surface: phosphatedDIN 3124, ISO 2725-1Short version with locking pin hole and O-ring grooveDimensions: width across flats 30, overall length 54 mm
£27.48

source: Amazon
Hazet 8858-1 Adapter, internal square 10 mm (3/8 inch)
Internal square drive 10 = 3/8" made of chrome vanadiumSurface: chrome-platedExternal square drive 12.5 = 1/2"
£15.51

Hazet 9070-7 Filter pressure regulator with pressure gauge
Filter pressure reducer with pressure gaugeAir connection thread 12.91 mmAir flow at 6.3 bar: 1800 Nl/minMax. pressure: 16 barPressure display: 0.5-12 barFiltration rating: 10µmFilling capacity: 50 mlNet weight: 0.38 kgTemperature range: -10°C 55°C

source: Amazon
Hazet fender protector 890 x 500 mm
Specially coated anti-slip materialWaterproof, oiland grease-repellentAdheres almost completely vertically to all bodywork surfaces (aluminum, steel, fiberglass)Complies with fire safety standards British Standard and USA Fed 302Washable at +40° CProtects bodywork surfaces against scratches and damageDimensions: 890 x 500 mmMaterial: 60% polyester, 30% polyamide/nylon, 10% cotton
£37.19

Hazet Body Sheet Metal Shear Left-Cutting
Tin snips with left-cutting designSuitable for curved and straight cutsWith lever transmission for easy cuttingDie-forged and fully tempered scissor headInduction-hardened blade with batten for precise cuttingErgonomic HAZET 2-component plastic handles in blue/blackDimensions: Length 260 mmNet weight: 0.52 kg
£56.28

source: Amazon
Hazet Internal Puller Diameter min 14 max 19 Thread M 10
Hazet Internal Puller 14 19 (1788N-14)Material: Tool steelDiameter: 14-19 mmThread size: M10With reinforced collar for effortless and secure removal of needle bearings, ball bearings, and brass bushingsNet weight: 0.16 kg
£80.77

source: Amazon
Hazet Lambda Sensor Socket Wrench Size 22 or Hex Key 30
For installation and removal of the lambda sensorSuitable for FORD, BMW, OPEL, VW, AUDI, SEAT, ŠKODADouble internal square drive 12.5 = 1/2"Suitable for stuck exhaust sensorsAlso for particle sensor, NOX sensor, exhaust temperature sensorTorque-controlled tightening possible, slot width: 8 mm
£78.99

source: Amazon
Hazet Internal Puller Diameter min 55 max 70 Thread M 14 x 1.5
Special Steel MaterialDiameter: 55-70 mmWith Reinforced CollarNet Weight: 1.76 kg
£280.99

source: Amazon
HAZET Plastic Pad White 9033-9-03/5
Soft and suitable for polishing in the second working stepNet weight: 0.08 kgIncluded components: One set
£69.99

source: Amazon
Hazet separation and assembly fork width 23 blade length 80
Hazet Separation and Assembly Fork 1780-23Suitable for quickly releasing tie rod ends, steering levers, and control componentsAlso suitable for shock absorber disassembly and separation tasksUsable even in very tight spacesTechnical information: 80 mm length, 0.86 kg net weightLength 1: 340 mm, Length 2: 80 mm
£73.56

source: Amazon
Hazet crimping pliers 150 mm short, article no. 4658-10
Crimping pliers with quick-change system for uninsulated cable and contact connectionsIntegrated locking mechanism for secure crimpingUniform rolling of conductor and insulation crimps through linear crimpContact positioning in the crimp profile independent of plug zones with insulation stopWith interchangeable head for cross-sectional range 0.35-1.5 mm²
£290.97

source: Amazon
Hazet Lever Wrench 2165-3
Lever with bright nickel-plated surfaceOverall length of 400 mmNet weight of 0.63 kgSuitable for installing and removing bearings, springs, pins, gears
£41.76

source: Amazon
Hazet Lever Iron, 2165-2
Tool for installing and removing bearings and bearing shellsSuitable for installation and removal of springs, pins, gears, etc.Surface bright nickel-platedMade of special steelOverall length: 400 mmNet weight: 0.5 kgHand-operated
£36.95

source: Amazon
Hazet 1849-7 Ignition Coil Puller VW Skoda
For disassembly and assembly of ignition coils with power stageSuitable for VW Polo, Fox 1.2 L, Golf 1.4, 1.6 L, Golf Plus 1.4 L from model year 2005, Caddy 1.4 L, Bora 1.4, 1.6 L, Beetle 1.4 L (gasoline engines from 2003), Scirocco 1.4 L from model year 2009, Lupo 4-cylinder direct injection from model year 1999, Passat, Touran 1.6 L, Phaeton, Transporter T4, ŠKODA FabiaT-handle made of plasticSurface: chrome-platedOverall length: 135 mmNet weight: 0.15 kg
£41.50

source: Amazon
Hazet Mechanical Nut Splitter for Nuts 13 to 24 mm
Nut splitter for grade 5 and 6 nutsNet weight: 0.31 kgSuitable for nuts with wrench size 17-24 mmSpare part number: 847-10A
£83.95

HAZET screwdriver bit set, internal square 12.5 mm (1/2")
9-piece socket wrench set with TiN-coated bladesInternal square (Robertson) drive 12.5 = 1/2"Including screwdriver bits for hexagon socket screwsShort version with knurling, plastic case 165-SDimensions: 185 mm x 153 mm x 52 mm, Weight: 1.44 kgTiN coating for high adhesion and abrasion resistanceIncluding 5-19 mm wrench sizes
£118.99

source: Autodoc
Hazet Power Extension Internal Square 20 Solid Square 20 Length 330
Hazet Impact and Machine Driver Extension 1005S-13Square hollow 3/4 inchNet weight: 1.3 kgLength: 330 mmSurface: phosphated, oiledDIN/ISO: DIN3121Drive end: Square 20 mm (3/4 inch)Working end: Square 20 mm (3/4 inch)
£128.99

source: Amazon
Hazet separation and assembly fork width 29 blade length 90
Separation and mounting fork with wedge-shaped forkEasy to handle and versatile in useTotal length: 80 mm, Length l1: 350 mmNet weight: 1.13 kgFork opening: 29 mm
£83.99

source: Amazon
Hazet Glass Removal Tool, Article No. 4852/6
Hand-operated Glass Removal Tool SetSuitable for all bonded windshields and most rear and side windowsSquare cutting wire for quickly cutting through adhesive beadsSaw wire made of three brass-plated steel wires for wide or tough adhesive beadsDurable wire starter with large T-handle for piercing the wireOpposite holder with long shaft and sturdy M4 thread for secure grip of the cutting wire
£163.73

source: Amazon
Hazet 798-9 angled hose clamp pliers
For 12 and 15 mm wide spring band clampsRotatable jaws, angled at 110°Suitable for tight spacesWith locking mechanismOverall length: 250 mmNet weight: 0.4 kg
£57.99

source: Amazon
Hazet 1790-7 Universal Ball Joint Puller
Universal Ball Joint Puller by Hazet (1790-7)Clamping range from 12 mm to 50 mmWeight: 1242 gSuitable for FORD, BMW, Volvo, TOYOTA, OPEL, VW, AUDI, RENAULTSurface: zinc-plated (Cr6 free)OE numbers: VW: 3287, 3287A, T10239 | FORD: 211020, 211-020
£120.99

source: Amazon
HAZET Plastic Pad Yellow 9033-9-02/5
5 pieces of plastic padsYellow, hard foam padFor polishing in the first working stepNet weight: 0.05 kgLength: 160 mm, Height: 90 mm, Width: 90 mmPackaging volume: 1296 ccCountry of origin: TW, Statistical commodity code: 39269097
£69.99

source: Amazon
Hazet 900SZ/4 Drive Shaft, Joint Shaft, Axle Shaft Set, 4-piece, 12.5 mm (1/2 inch) Internal Square
Square drive, joint & axle shaft setFor operating drive and joint shaft fasteningsOutput external double hex traction profileFor machine operationTool holder: 1/2 inchWrench sizes: 24 mm, 30 mm, 32 mm, 36 mmLength: 44 mm, 2x 50 mm, 60 mmMaterial: surface phosphated, oiledWeight: 990 g
£63.93

HAZET Switch Ratchet, 10 mm (3/8") Internal Square Drive 8816GK
3/8" flex-head ratchet wrench with a length of 218 mmExternal square drive 10 = 3/8"Ratchet wheel with 30 teeth2-component handle for optimal handlingMaterial: chrome vanadium, chrome-plated and polishedJoint locking enables 180° swivel movementSwitching via selector leverBall detent for secure hold
£67.78

source: Amazon
Hazet Claw Puller 1975
Gripping of non-magnetic parts possibleFlexible useChromed surfaceOverall length: 540 mmNet weight: 0.11 kg
£50.37

source: Autodoc
Hazet 1779-55 Ball Joint Puller 55x80 mm
Ball joint puller with an opening width up to 81.3 mmNet weight of 2.08 kgMaterial: tool steelSurface: zinc-platedClamping depth of 80 mmSuitable for commercial vehicles such as MAN and MERCEDES-BENZ
£153.99

source: Autodoc
Hazet Radiator Vacuum Filling Device in Case
Vacuum leak test before fillingCompatible with Hazet cooling system tester program 4800Bubble-free filling, quick coupling systemNo venting required, suitable for almost all vehicle typesHose: 7 x 1.5 mm, Ø 10 mm, Ø 7 mm
£294.99

source: Amazon
Hazet Lever Wrench 2165-1
Hazet Lever Bar 400mm 2165-1For inserting and removing bearings and bearing shells, installation and removal of springs, pins, gears, etc.Surface: bright nickel-platedPower source: hand-operated
£54.84

source: Autodoc
Hazet 2172 oil filter claw
Max. clamping range: 115 mmMin. clamping range: 65 mmGalvanizedSpecial steelForgedLeftand right-turning actionInternal 4-square drive 3/8'' and external 6-hex drive 19 mm
£74.99

source: Amazon
HAZET Reversible Ratchet with Swivel Bar, 20 mm (3/4") Square Drive
Switch ratchet head with rotating barNumber of teeth: 32Operation mode: manualMaterial: chrome-vanadium steelSurface: chrome-plated, polishedDrive square: 20 mm (3/4 inch)Length: 620 mmNet weight: 2.81 kg
£111.60

source: Amazon
Hazet 4963-1 Brake Tool VW Seat Skoda Opel
Actuation tool for removal and installation of spring plate and brake shoe retaining spring on drum brakesSuitable for VW, SEAT, SKODA, OPEL, and RENAULT with rear drum brakesFast and secure execution of the operationPressure-rotating part with carbide coating in the front functional areaPlastic handle for comfortable workingChromed surfaceOverall length: 237 mm, net weight: 0.2 kg
£72.74
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0

















