Sorry, nothing was found. Please change your selection and try again.
Showing 1 - 40 of 41 results
Filters
Sort by:
Best Match
Best Match
Price: Low to high
Price: High to low
Exact 7pc HSS-G-E Machine Twist Drill DIN371B Red
7-piece machine tap setSuitable for high-strength steels over 1000N/mm²Metric ISO thread DIN13, tolerance 6HRight-hand cuttingMaterial: HSS-EForm B for through holesExact 42345 DIN 371
£60.31
Exact 6pc HSS Countersink Set 6.3 - 20.5 mm
HSS countersink with 90° countersink head according to DIN 335 Form CCylindrical shank with 3 flutes for precise countersinking and deburringCBN deep-ground for high surface finishCombined axial-radial relief grind for defined cutting edge geometrySuitable for various materialsMaterial: High-speed steel
source: Amazon
Exact Thread Assortment HM25 DIN 371B/376B HSSG Form B
7-piece Machine Tap SetMetric Sizes: M3/M4/M5/M6/M8/M10/M12Right-hand CuttingProfile Ground and Back-TaperedTolerance 6H = ISO 25-Step Start with Skin Cut for Through HolesMaterial: HSS (High-Speed Steel)
£44.03
Exact HSSG-E Machine Thread Tap M25x1.5 Fine
Machine tap Form C for through and blind holesUniversal application for structural steels up to 1000 N/mm²Metric ISO thread DIN13, tolerance 6HHSS-E high-performance machine tap according to DIN 374 Form CSuitable for through holesApplication in materials with good machinability up to 750 N/mm²Special dimensions for ISO cable glands
Exact HSS Step Drill Bit 4-20 mm TiN
Overall length of the drill bit is 67 mm3-flute shank for stable and secure handlingLaser scale of hole diameters for precise workCross sharpening for clean and precise drilling
Exact 3pc HSS Sheet Metal Countersink Drill Bit 3-30.5mm TIAL
ROTASTOP® comfort shaft prevents slipping in the chuckLaser scale for hole diameter and speedsRobust steel sheet metal cassette and drilling paste includedHSS twist drill bit set tenifer treatedSuitable for burr-free drilling and reaming of sheets, pipes, and profiles
Exact HSS-E Sheet Metal Countersink 6-20 mm TiAlN
Exact Sheet Metal Step Drill HSS-EHole diameter from 4.0 to 20.0 mmTiAlN coating for hardness and durabilityLaser markings for precisionNo coolant requiredTemperature resistant up to 800° CSuitable for hard materials
Exact HSSG-E Machine Thread Tap M16x1.5 Fine
HSS-E high-performance machine tap according to DIN 374 Form CSuitable for through and blind holesUniversal use for construction steels up to 1000 N/mm²Metric ISO thread DIN13, tolerance 6HUse in materials up to 750 N/mm²Special dimensions for ISO cable glands
Exact 7-piece HSS Ground Twist Drill Bit Set DIN 371B Yellow
7-piece machine tap setYellow ring DIN 371B for metric ISO thread DIN 13Profile ground and undercutTolerance 6H = ISO 25-flute lead with peeling cut for through holesM3 M6 with point, M8 M12 without point
Exact HSSG-E machine thread tap M12x1.5 fine
Machine tap Form C for through and blind holesUniversal use for structural steels up to 1000 N/mm²Metric ISO thread DIN13, tolerance 6HHSSG-E high-performance machine tap according to DIN 374 Form CSuitable for through holesUse in easily machinable materials up to 750 N/mm²Special dimensions for ISO cable glands
Exact 8-piece HSS-G Thread Cutting Tap Set M3 - M12
Thread cutting die set for M3, M4, M5, M6, M8, M10, M12 threadsFor producing metric ISO threads according to DIN 323Suitable for steels up to 900 N/mm²Material: HSS steelThread die holder M3 M12Thread cutting dies: 7 pieces M3 x 0.5 mm / M4 x 0.7 mm / M5 x 0.8 mm / M6 x 1.0 mm / M8 x 1.25 mm / M10 x 1.5 mm / M12 x 1.75 mm
Exact 44pc Thread Cutting Set M3-M12
Thread cutting set with 37 piecesMetric sizes: M3, M4, M5, M6, M8, M10, M12Sturdy steel sheet cassette for storagePrecise HSS cutting toolsDIN 352 roughing, intermediate, and finishing tapsDIN 223 die headsDIN 1814 tap wrench
Thread Repair Kit M10 EXACT 19pcs
Repair of damaged threadsIncludes spiral drill, tap, installation tool, and break-off pinThread inserts 1.5 x DResulting thread often stronger than originalTightly toleranced thread inserts
Exact 4PC Keyway Deburring Set Ø 3.2 mm KW
Wedge slot deburring tool set with ergonomic handle T (Ø 3.2 mm)Set includes telescopic adapter KW for blade mountingBlade KW9 for narrow wedge slots up to 9 mmBlade KW16 for wide wedge slots up to 16 mmBoth blades feature a "steep" and a "flat" deburring edgeHandle T allows direct attachment of infinitely adjustable telescopic adapters
Exact HSS Step Drill 4-12 mm TiN
Ideal for sheet metal processing in the automotive, machinery, and sanitary sectorsAlso usable as an antenna drillLaser scaling for hole diameter and speedOperating instructions on the toolEdge breaker for deburring area
Exact HSS Countersink TiN Ø 25 mm
HSS Countersink 90° according to DIN 335 Form CWith cylindrical shank and 3 cutting edgesCBN precision-ground for defined cutting geometry and high surface finishTiN-coated for optimal tool lifeUniversally applicable for metalworkingLarge flutes for efficient chip evacuationLow power requirement due to special grinding process
Exact 7-piece HSS-G-E machine drill bit set DIN 371 blue
Machine tap with 35° right-hand spiral for stainless steel processingManufacture of metric ISO threads according to DIN 371 / DIN 376Taps for M3, M4, M5, M6, M8, M10, M12 threads2-flute start for blind holesMaterial: HSS-E steelRecommended for stainless steel 850N/mm², cutting oil or emulsion for cooling
Exact 3pc HSS Step Drill Bit Set
HSS Step Drill Bit Set with 3 PiecesIdeal for drilling precise holes in various materialsSuitable for use in crafts and industry
Exact 6pc Single-Thread Tap Set M12-M32
6-piece threaded core drill bit set for cable glandsThread diameters: Ø7mm, 10.5mm, 14.5mm, 18.5mm, 23.5mm, 30.5mmThread sizes: M12x1.5, M16x1.5, M20x1.5, M25x1.5, M32x1.5Through holes with diameters: Ø12.5mm, 16.5mm, 20.5mm, 25.5mm, 32.5mmHSS (High-Speed Steel) material for metric ISO fine threads DIN 13, tolerance 6HShort design with hex drive for one-handed use in hard-to-reach areasGuide pin for perfect, flush threadsDrive compatible with socket and ratchet
Exact 50902 Clip Set M3-M10 HSS-TiN Coated + Adapter 1/4" Drive
Core drilling, threading, deburring in one operationContents: 8-piece, Thread type: metricRotation direction: right-hand cutting, Material: HSS
EXACT SGE bit set HSSG M3-M10 with adapter, 7-piece
Combination tap bit for core drilling, threading, and deburring in a single operationSuitable for mobile use with cordless drills6.3 mm (1/4) bit drive (DIN 3126) for secure chuck gripSuitable for materials up to 700 N/mm²7-piece set, metric, right-hand cutting, DIN 3126 HSS
£68.68
Exact Thread Cutting Tool Set STM15SF HSSG
49-piece thread cutting set in a robust steel caseHand taps made of HSS in various quality gradesDies suitable for general useSpiral drills made of high-performance high-speed steel with increased break resistanceDie guides for accurate and clean threadsSuitable for cutting rightand left-hand threadsCompatible with dies according to DIN 223 and die holders according to DIN 225
Exact hand tap set stainless steel DIN 352 HSSG-E, thread: M12
Hand tap for cutting internal threadsMetric ISO thread M12 x 1.75 mmIncludes tap drill, intermediate tap, and finishing tapCylindrical shank with 7 mm diameterOverall length of 75 mmCutting material HSS-E, polished surfaceThread pitch 1.75 mm, tolerance 6H
Exact 24PC Deburring Tool Starter Kit 3
Deburring set for holes, grooves, and edges on metals and plasticsIncludes handles and telescopic holders for blade sizes 2.6mm and 3.2mmSuitable for various materials such as steel, aluminum, copper, zinc, hard plastic, plastic, stainless steel, and brassHandles type T and D for mounting all telescopic holdersTelescopic holder DTP for 2.6mm blades and DTC for 3.2mm blades
Exact 2-piece HSS hand tap M25x1.5 DIN2181
2-piece hand tap setMetric fine threadRight-hand cutGround and profile groundTolerance: 6H=ISO2
Exact 7-piece HSS-G-E machine twist drill bit set DIN 371 red
Rotring DIN 371 tap with 35° right-hand spiralSuitable for metric ISO thread DIN 13Profile ground and relief groundFor steels over 1000N/mm²Tolerance 6H = ISO 22-step thread start for blind holes
Thread Repair Kit M6 EXACT 19-piece
19-piece thread repair kit for economical repair of damaged threadsEasy and fast installationDurable and wear-free, corrosion and temperature resistantEnd result often better and stronger than the original thread
Exact HSS Step Drill Bit 4-20 mm TiAlN
HSS step drill bit with an overall length of 67 mmDrill bit features a 3-flat shankDiameter range from 4 to 20 mmSuitable for precise drilling in various materials
Exact cross hole countersink set HSS-E 90° 4-piece
4-piece HSS-E Cross-Hole Countersink Set 90°With cylindrical shank for countersinking and deburring holesSuitable for long-chipping and lubricating materialsChip removal through cross holeSize range: 10-27.5 mmIdeal for metalworking and locksmithing
Exact 20334 Tap Set with Holder and Core Drill
Thread chaser tap DIN 352 in M3-M12Core drill Ø 2.5-10.2 mmWrench size 1 1/2 made of HSS
Exact HSSG-E Machine Thread Tap M20x1.5 Fine
HSS-E high-performance machine tapDIN 374 Form C for through holesUniversal use for structural steels up to 1000 N/mm²Metric ISO thread DIN13, tolerance 6HUse in materials up to 750 N/mm²Special sizes for ISO cable glands
Exact 3-piece Sheet Metal Deburring Tool Set Ø 3.2 mm
Ergonomic handle (Ø 3.2 mm) with fixed holder for deburring blades S12Set with handle and 2 x S12 blades for edges from 0 12 mmLong disc lifespan through flipping and turning3-piece sheet metal deburring set
Exact HSS Step Drill Bit 4-12 mm TiAlN
Overall length of the drill bit is 80 mm3-facet shank for stable and secure handlingSuitable for precise drilling in various materials
Exact 54pc Thread Cutting Set M3 - M20
Thread cutting set for threads from M3 M20Includes round dies, die holder, hand taps, adjustable tap wrenches, and thread gauge52-piece set in durable steel caseTolerances 2B / 6H = ISO2 standard general thread connectionHand taps made of HSS in various quality gradesDies for general use, suitable for steels up to 900 N/mm²Complete set from M3 to M20
Exact countersink in steel sheet cassette DIN 335C HSS
Countersink Set with 90° AngleDiameter from 6.3 to 20.5 mmMade from HSS according to DIN 335CSuitable for countersinking flat head screws and deburringCountersinking range from 1.5 to 3.5 mmIncludes countersinks in sizes 6.3 / 8.3 / 10.4 / 12.4 / 16.5 / 20.5 mm
Exact 3-piece HSS Hand Tap Set M3 DIN352
Pre-, intermediate, and finishing taps for internal threadsThread size M3 x 0.50 mmThread length of 11 mmTool quality in HSS according to DIN 352Suitable for through and blind holesDrill core hole with diameter 2.5 mmMaterial: high-speed steel
Exact HSS Step Drill Bit 6-30 mm TiN
Exact 5348 HSS Step Drill BitDrilling diameter from 6 30 mmOverall length of 98 mm3-flat shank1 piece includedTiN coating
Exact thread cutting tap HSS, C52475
Thread cutting tap for metric fine threadsShort version with hex drivePilot pin for flawless, aligned threadsDrive with socket and ratchetSuitable for one-handed operation in hard-to-reach areasNominal thread diameter: M32 x 1.5Standard: factory standard, cutting direction: right
Exact 3pc HSS Hand Tap Set M5 DIN352
Ground and form-groundTolerance 6H=ISO23-piece set with plug, bottom, and finishing tapHSS metric hand tap set DIN 352Suitable for metric threads
Exact 2PC HSS Hand Tap M16x1.5 DIN2181
Hand tap for cutting internal threadsSuitable for through holes and blind holesMetric ISO thread DIN13, tolerance 6H2-piece HSS metric fine hand tap set DIN 2181Right-hand cutExact 00502 HSS 1 set
Refine Search
Filters
Clear All
Category
✓Price
✓Brand
1Seller
0
