Direnza - Jap Parts Europe LTD

A set of Direnza 30mm Lowering Springs for the BMW 1 Series 135i E82 is one of the easiest ways to significantly improve the looks and handling characteristics of your car. A simple, but hugely effective modification. Lowering your vehicles ride height reduces weight transfer under hard acceleration and braking, whilst also reducing body roll and drastically improving your cars visual appeal. Better still, Direnza Lowering Springs feature progressive rates, so you won't be forfeiting comfort in pursuit of performance. Direnza Springs offer: Lower Centre of Gravity | Improved looks | Progressive Spring Rates | Corrosion Resistant Red Coating | Excellent Value for Money | 5-Year Warranty.

All Direnza Cold Air Induction Systems are supplied with a three-inch diameter air filter manufactured from high quality, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your BMW, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the N54 engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment.

A set of Front 30mm, Rear 20mm Direnza Lowering Springs for the BMW 1 Series E81/E87 - 118i | 120i is one of the easiest ways to significantly improve the looks and handling characteristics of your car. A simple, but hugely effective modification. Lowering your vehicles ride height reduces weight transfer under hard acceleration and braking, whilst also reducing body roll and drastically improving your cars visual appeal. Better still, Direnza Lowering Springs feature progressive rates, so you won't be forfeiting comfort in pursuit of performance. Direnza Springs offer: Lower Centre of Gravity | Improved looks | Progressive Spring Rates | Corrosion Resistant Red Coating | Excellent Value for Money | 5-Year Warranty.

A set of Front 50mm, Rear 35mm Direnza Lowering Springs for the BMW 116D | 118D | 120D | 130I E81/E87 is one of the easiest ways to significantly improve the looks and handling characteristics of your car. A simple, but hugely effective modification. Lowering your vehicles ride height reduces weight transfer under hard acceleration and braking, whilst also reducing body roll and drastically improving your cars visual appeal. Better still, Direnza Lowering Springs feature progressive rates, so you won't be forfeiting comfort in pursuit of performance. Direnza Springs offer: Lower Centre of Gravity | Improved looks | Progressive Spring Rates | Corrosion Resistant Red Coating | Excellent Value for Money | 5-Year Warranty.

Direnza wheel spacers have been developed to widen the stance of your car, giving it an aggressive look whilst also delivering noticeable handling improvements. Specifications: Bolt Pattern: 5×120 Thread Pitch: M12x1.5 Thickness: 25mm Centre Bore: 72.6mm Supplied in pairs Features: Manufactured from high strength, lightweight 6061-T6 aircraft aluminium alloy, forged hard anodised for durability and corrosion protection Precision engineered hub-centric and model specific for a perfect fit and wheel balance Limited life range tested for wheel bolts/studs (1 million times) in accordance to ISO3800 Strength tested for applications (bolt/stud/nut) in accordance to IS0898-6, SAEJ429, SAEJ995 Anti-rust tested (NSS 72 hours) for applications (bolt/stud/nut) in accordance to IS09227

Direnza wheel spacers have been developed to widen the stance of your car, giving it an aggressive look whilst also delivering noticeable handling improvements. Specifications: Bolt Pattern: 5×120 Thread Pitch: M12x1.5 Thickness: 15mm Centre Bore: 72.6mm Supplied in pairs Features: Manufactured from high strength, lightweight 6061-T6 aircraft aluminium alloy, forged hard anodised for durability and corrosion protection Precision engineered hub-centric and model specific for a perfect fit and wheel balance Limited life range tested for wheel bolts/studs (1 million times) in accordance to ISO3800 Strength tested for applications (bolt/stud/nut) in accordance to IS0898-6, SAEJ429, SAEJ995 Anti-rust tested (NSS 72 hours) for applications (bolt/stud/nut) in accordance to IS09227

Direnza wheel spacers have been developed to widen the stance of your car, giving it an aggressive look whilst also delivering noticeable handling improvements. Specifications: Bolt Pattern: 5×120 Thread Pitch: M12x1.5 Thickness: 20mm Centre Bore: 72.6mm Supplied in pairs Features: Manufactured from high strength, lightweight 6061-T6 aircraft aluminium alloy, forged hard anodised for durability and corrosion protection Precision engineered hub-centric and model specific for a perfect fit and wheel balance Limited life range tested for wheel bolts/studs (1 million times) in accordance to ISO3800 Strength tested for applications (bolt/stud/nut) in accordance to IS0898-6, SAEJ429, SAEJ995 Anti-rust tested (NSS 72 hours) for applications (bolt/stud/nut) in accordance to IS09227

Direnza wheel spacers have been developed to widen the stance of your car, giving it an aggressive look whilst also delivering noticeable handling improvements. Specifications: Bolt Pattern: 5×120 Thread Pitch: M12x1.5 Thickness: 30mm Centre Bore: 72.6mm Supplied in pairs Features: Manufactured from high strength, lightweight 6061-T6 aircraft aluminium alloy, forged hard anodised for durability and corrosion protection Precision engineered hub-centric and model specific for a perfect fit and wheel balance Limited life range tested for wheel bolts/studs (1 million times) in accordance to ISO3800 Strength tested for applications (bolt/stud/nut) in accordance to IS0898-6, SAEJ429, SAEJ995 Anti-rust tested (NSS 72 hours) for applications (bolt/stud/nut) in accordance to IS09227

A set of Front 20mm, Rear 20mm Direnza Lowering Springs for the BMW 1 Series E82 135i is one of the easiest ways to significantly improve the looks and handling characteristics of your car. A simple, but hugely effective modification. Lowering your vehicles ride height reduces weight transfer under hard acceleration and braking, whilst also reducing body roll and drastically improving your cars visual appeal. Better still, Direnza Lowering Springs feature progressive rates, so you won't be forfeiting comfort in pursuit of performance. Direnza Springs offer: Lower Centre of Gravity | Improved looks | Progressive Spring Rates | Corrosion Resistant Red Coating | Excellent Value for Money | 5-Year Warranty.

All Direnza Cold Air Induction Systems are supplied with a high quality, cone style air filter; designed to replace the OEM airbox, offering more surface area compared to the standard filter. Direnza air filters are manufactured from premium grade, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your vehicle, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity Engineered to help the 2.0 diesel engine breathe easier and improve throttle response from your BMW 1 Series Gains in power and torque are noticeable over a larger RPM range A straightforward way to give your 120D a sporty, performance soundtrack Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses

MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. +4.9hp / + 10.2nm Intake air temps 12.75°C lower than stock intercooler 42% larger than stock intercooler core Black coating improves heat dissipation properties Designed using state of the art 3D CAD and CFD modelling Direct replacement for the original core TIG welded for maximum strength and durability Test car: BMW F20 M135i 2016 Put through its paces on a state-of-the-art Dyno, our Multi Vane Technology Intercooler for the BMW F20 M135i platform yielded some highly impressive results. After installing our revolutionary MVT Intercooler, we some some gains in overall engine performance. With the M135i now +4.9Bhp & +10.2Nm more than the stock Intercooler setup without any any additional engine mapping. What's more impressive is the temperature drops recorded on the dyno, we saw intake temps drop by 12.75°C with our MVT intercooler installed. We also successfully tested the Intercooler up to 418.6bhp without intake temperatures reaching stock levels. The Direnza Performance MVT Intercooler for the BMW 1 Series F20 M135i will allow you to unlock greater tuning potential, future proofing your car for any additional upgrades.

A set of Front 35mm, Rear 45mm Direnza Lowering Springs for the BMW F20/F21 125 | 114D | 116D | 118D | 120D is one of the easiest ways to significantly improve the looks and handling characteristics of your car. A simple, but hugely effective modification. Lowering your vehicles ride height reduces weight transfer under hard acceleration and braking, whilst also reducing body roll and drastically improving your cars visual appeal. Better still, Direnza Lowering Springs feature progressive rates, so you won't be forfeiting comfort in pursuit of performance. Direnza Springs offer: Lower Centre of Gravity | Improved looks | Progressive Spring Rates | Corrosion Resistant Red Coating | Excellent Value for Money | 5-Year Warranty.

All Direnza Cold Air Induction Systems are supplied with a three-inch diameter air filter manufactured from high quality, washable cotton, ensuring long-lasting performance enhancements. Includes lightweight alloy pipework mandrel-bent for accurate placement on your BMW, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Provides a performance increase of +14.4Hp and 17.5Nm of torque Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity Engineered to help the engine breathe easier and improve throttle response A great way to provide your M135i with a performance soundtrack Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses

Direnza wheel spacers have been developed to widen the stance of your car, giving it an aggressive look whilst also delivering noticeable handling improvements. Specifications: Bolt Pattern: 5×120 Thread Pitch: M14x1.25 Thickness: 15mm Centre Bore: 72.6mm Supplied in pairs Features: Manufactured from high strength, lightweight 6061-T6 aircraft aluminium alloy, forged hard anodised for durability and corrosion protection Precision engineered hub-centric and model specific for a perfect fit and wheel balance Limited life range tested for wheel bolts/studs (1 million times) in accordance to ISO3800 Strength tested for applications (bolt/stud/nut) in accordance to IS0898-6, SAEJ429, SAEJ995 Anti-rust tested (NSS 72 hours) for applications (bolt/stud/nut) in accordance to IS09227

All Direnza Cold Air Induction Systems are supplied with a high quality, cone style air filter; designed to replace the OEM airbox, offering more surface area compared to the standard filter. Direnza air filters are manufactured from premium grade, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your vehicle, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Power increase +8.4Hp and torque +9.7Nm Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity Engineered to help the 3.0 petrol engine breathe easier and improve throttle response from your m140i Gains in power and torque are noticeable over a larger RPM range A straightforward way to give your 1 Series a sporty, performance soundtrack Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses

MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. +4.9hp / + 10.2nm Intake air temps 12.75°C lower than stock intercooler 42% larger than stock intercooler core Black coating improves heat dissipation properties Designed using state of the art 3D CAD and CFD modelling Direct replacement for the original core TIG welded for maximum strength and durability

Direnza wheel spacers have been developed to widen the stance of your car, giving it an aggressive look whilst also delivering noticeable handling improvements. Specifications: Bolt Pattern: 5×120 Thread Pitch: M14x1.25 Thickness: 30mm Centre Bore: 72.6mm Supplied in pairs Features: Manufactured from high strength, lightweight 6061-T6 aircraft aluminium alloy, forged hard anodised for durability and corrosion protection Precision engineered hub-centric and model specific for a perfect fit and wheel balance Limited life range tested for wheel bolts/studs (1 million times) in accordance to ISO3800 Strength tested for applications (bolt/stud/nut) in accordance to IS0898-6, SAEJ429, SAEJ995 Anti-rust tested (NSS 72 hours) for applications (bolt/stud/nut) in accordance to IS09227

Direnza wheel spacers have been developed to widen the stance of your car, giving it an aggressive look whilst also delivering noticeable handling improvements. Specifications: Bolt Pattern: 5×112 Thread Pitch: M14x1.25 Thickness: 10.5mm Centre Bore: 66.5mm Supplied in pairs Features: Manufactured from high strength, lightweight 6061-T6 aircraft aluminium alloy, forged hard anodised for durability and corrosion protection Precision engineered hub-centric and model specific for a perfect fit and wheel balance Limited life range tested for wheel bolts/studs (1 million times) in accordance to ISO3800 Strength tested for applications (bolt/stud/nut) in accordance to IS0898-6, SAEJ429, SAEJ995 Anti-rust tested (NSS 72 hours) for applications (bolt/stud/nut) in accordance to IS09227

Direnza wheel spacers have been developed to widen the stance of your car, giving it an aggressive look whilst also delivering noticeable handling improvements. Specifications: Bolt Pattern: 5×112 Thread Pitch: M14x1.25 Thickness: 12mm Centre Bore: 66.5mm Supplied in pairs Features: Manufactured from high strength, lightweight 6061-T6 aircraft aluminium alloy, forged hard anodised for durability and corrosion protection Precision engineered hub-centric and model specific for a perfect fit and wheel balance Limited life range tested for wheel bolts/studs (1 million times) in accordance to ISO3800 Strength tested for applications (bolt/stud/nut) in accordance to IS0898-6, SAEJ429, SAEJ995 Anti-rust tested (NSS 72 hours) for applications (bolt/stud/nut) in accordance to IS09227

A set of Front 35mm, Rear 45mm Direnza Lowering Springs for the Bmw 1 Hatchback 114 | 116 | 118 F20 is one of the easiest ways to significantly improve the looks and handling characteristics of your car. A simple, but hugely effective modification. Lowering your vehicles ride height reduces weight transfer under hard acceleration and braking, whilst also reducing body roll and drastically improving your cars visual appeal. Better still, Direnza Lowering Springs feature progressive rates, so you won't be forfeiting comfort in pursuit of performance. Direnza Springs offer: Lower Centre of Gravity | Improved looks | Progressive Spring Rates | Corrosion Resistant Red Coating | Excellent Value for Money | 5-Year Warranty.